Legrand On-Q MS3651 6.5-Inch In-Wall Speaker System User Manual

1. Киришүү

Thank you for choosing the Legrand On-Q MS3651 6.5-inch In-Wall Speaker System. These speakers are designed for multi-room audio installations, offering high-efficiency sound reproduction. Featuring blue mica fiber woofers and silver mylar tweeters, they deliver excellent sound quality and a smooth frequency response for an immersive audio experience in your home or office environment.

2. Коопсуздук боюнча маанилүү маалымат

Please read all safety instructions before installation and use.

• Кесиптик орнотуу сунушталат: Installation of in-wall speakers requires knowledge of electrical wiring and building codes. If you are unsure, consult a qualified electrician or audio installer.
• Өчүрүү: Always disconnect power to the circuit before performing any installation or wiring.
• Зымдар: Use appropriate gauge speaker wire for your installation length to prevent signal loss and ensure safe operation. Ensure all connections are secure and insulated.
• Структуралык бүтүндүк: Verify that the wall structure can support the weight of the speakers and that there are no electrical wires, plumbing, or other obstructions behind the intended mounting location.
• Вентиляция: Ensure adequate air circulation around any connected audio equipment (amplifier/receiver) to prevent overheating.
• Нымдуулук: Do not install speakers in areas prone to excessive moisture or direct water exposure, as these speakers are not waterproof.

3. Пакеттин мазмуну

Your Legrand On-Q MS3651 speaker system package should contain the following items:

• One pair (2 speakers) of Legrand On-Q 3000 Series 6.5-inch In-Wall Speakers.
• Two paintable speaker grilles.

Image: Two Legrand On-Q in-wall speakers with their paintable grilles installed, ready for integration into a wall.

4. Орнотуу боюнча колдонмо

4.1. Керектүү куралдар

• Арык тапкыч
• Drywall saw or utility knife
• Өлчөөчү скотч жана карандаш
• Speaker wire (appropriate gauge)
• Зымдарды сыйрып алуучулар
• Бурагыч (Phillips баш)
• Бургулоо (кошумча, пилоттук тешиктер үчүн)

4.2. Жайгашкан жерди тандоо

Careful placement is crucial for optimal sound performance. Consider the following:

• Дубал боштугу: Ensure sufficient depth and clear space behind the wall surface.
• Тоскоолдуктар: Use a stud finder to locate studs, electrical wires, and plumbing. Avoid these areas.
• Угуу аймагы: Position speakers to create a balanced sound field in your primary listening area.

4.3. Ачууну кесүү

1. Using the provided template (if included) or the speaker's outer frame, carefully trace the cutout dimensions onto the wall at your chosen location.
2. Using a drywall saw or utility knife, carefully cut along the traced line. Ensure the cut is clean and precise.

4.4. Динамиктердин зымдары

Сүрөт: алдыңкы view of the in-wall speaker without the grille, showing the blue mica fiber woofer and silver mylar tweeter.

1. Динамиктин зымынан өткөрүңүз amplifier/receiver to each speaker opening. Leave enough slack for easy connection.
2. Strip approximately 1/2 inch of insulation from the ends of the speaker wires.
3. Динамиктин оң (+) терминалын оң (+) терминалына туташтырыңыз amplifier, and the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.
4. Securely fasten the wires into the speaker's spring-loaded or screw terminals.

4.5. Баяндамачыларды орнотуу

Image: An installed Legrand On-Q in-wall speaker seamlessly integrated into a modern living room wall, demonstrating its discreet design.

1. Carefully insert the speaker assembly into the wall opening.
2. Tighten the mounting screws located on the front baffle of the speaker. These screws will engage the dog-ear clamps that pivot out and secure the speaker to the drywall. Do not overtighten.

4.6. Гриль орнотуу

Once the speaker is securely mounted, align the paintable grille with the speaker frame and gently press it into place until it is flush with the wall surface. The grilles can be painted to match your wall color if desired.

5. Иштөө нускамалары

After successful installation and connection to your amplifier or receiver, operating your Legrand On-Q in-wall speakers is straightforward:

1. Сиздин камсыз кылуу ampкөтөргүч/кабыл алгыч күйгүзүлгөн жана туура киргизүү булагына коюлган.
2. Үндү тууралаңыз amplifier/receiver to a comfortable listening level.
3. Enjoy high-quality audio playback through your discreetly installed in-wall speakers.

6. Техникалык тейлөө

Your Legrand On-Q in-wall speakers require minimal maintenance to ensure long-lasting performance:

• Тазалоо: Use a soft, dry cloth to gently wipe dust from the speaker grilles and surrounding areas. Avoid using harsh chemicals or abrasive cleaners.
• Грильге кам көрүү: If you have painted the grilles, handle them carefully to avoid chipping the paint. If repainting, ensure the paint is thin and does not clog the grille perforations, which could affect sound quality.
• Текшерүү: Periodically check the speaker grilles for any damage or loose fit.

7. Кыйынчылыктарды

Эгерде сиз динамиктериңизде көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

8. Техникалык шарттар

Below are the technical specifications for the Legrand On-Q MS3651 In-Wall Speakers:

9. Кепилдик жана колдоо

The Legrand On-Q MS3651 In-Wall Speaker System comes with a Limited or Full Warranty. For specific details regarding your warranty coverage, please refer to the warranty card included with your purchase or visit the official Legrand On-Q webсайт.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand On-Q customer service through their official webсайт же продукт документациясында көрсөтүлгөн байланыш маалыматы.

Онлайн ресурстар: Legrand On-Q Official Webсайт