Bburago 18-41211

Bburago 1:32 Scale Ferrari F10 Wrist Racers Instruction Manual

Model: 18-41211 | Brand: Bburago

Introduction

This manual provides essential instructions for the safe and proper use of your Bburago 1:32 Scale Ferrari F10 Wrist Racers. Please read this manual thoroughly before operating the product and retain it for future reference.

Коопсуздук маалыматы

Травматизмди же буюмга зыян келтирбөө үчүн төмөнкү коопсуздук чараларын сактаңыз:

Пакеттин мазмуну

Жайгашуу

1. Battery Installation for Controller

The R/C Wristband Controller requires 3 AAA batteries (not included).

  1. Locate the battery compartment on the back of the wristband controller.
  2. Батарея бөлүкчөсүнүн капкагын ачуу үчүн кичинекей бурагычты колдонуңуз.
  3. Туура полярдуулукту (+/-) камсыз кылуу менен 3 AAA батарейкасын салыңыз.
  4. Батарея уясынын капкагын ордуна коюңуз жана аны бурама менен бекитиңиз.
Bburago Ferrari F10 Wrist Racers controller, showing the wristband and mini steering wheel with buttons.

1-сүрөт: R/C Wristband Controller. The battery compartment is located on the underside of the main unit.

2. Charging the Ferrari F10 Race Car

The Ferrari F10 Race Car is charged via infra-red technology from the wristband controller. Ensure the controller has fresh batteries.

  1. Ensure the wristband controller is powered ON.
  2. Place the Ferrari F10 Race Car directly in front of the controller, ensuring the infra-red emitters/receivers are aligned.
  3. Activate the charging function on the controller (refer to controller specific buttons, usually indicated by a charging icon or specific button press).
  4. A charging indicator light on the car or controller will illuminate during charging.
  5. Charging time may vary. Refer to the indicator light for full charge status.
Bburago Ferrari F10 Race Car with the wrist controller, showing arrows indicating movement and control.

2-сүрөт: Ferrari F10 Race Car and Wristband Controller in operation. The car receives commands and charges from the controller.

Иштөө нускамалары

Once the car is charged and the controller has batteries, you can begin operation.

  1. Күйгүзүү: Turn on the power switch on both the Ferrari F10 Race Car and the R/C Wristband Controller.
  2. Жупташтыруу: The car and controller should automatically pair via infra-red. Ensure they are within close proximity during initial power-on.
  3. Айдоо башкаруу элементтери:
    • Алдыга артка: Use the designated buttons or joystick on the mini steering wheel for forward and backward movement.
    • Сол оң: Use the steering wheel motion or directional buttons to steer the car left or right.
    • Толук функциясы: The car supports full directional control (forward, backward, left, right).
  4. Мотор үнү: The controller may feature an "Engine Start" button to activate realistic engine sounds from the car.
  5. Диапазон: Maintain a clear line of sight between the controller and the car for optimal infra-red signal transmission.
  6. Өчүрүү: Always turn off both the car and the controller after use to conserve battery life.

Техникалык тейлөө

Тазалоо

Сактагыч

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Car does not respond to controller.
  • Controller batteries are low or incorrectly installed.
  • Car battery is low.
  • Car and controller not paired.
  • Obstruction between car and controller.
  • Replace controller batteries, check polarity.
  • Charge the car fully.
  • Ensure both are powered on and in close proximity.
  • Ensure clear line of sight for infra-red signal.
Car moves slowly or erratically.
  • Car battery is low.
  • Interference from other infra-red devices.
  • Charge the car fully.
  • Move to an area free from other infra-red signals.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the packaging or contact your retailer. Keep your purchase receipt as proof of purchase.

Тектеш документтер - 18-41211

Preview Official Licensed Product Information - Bburago & Maisto
Details on official licensing and trademark usage for die-cast model cars and collectibles manufactured by May Cheong Group (Bburago, Maisto), featuring a wide range of automotive brands.
Preview Etekcity Digital Asma Scale EHS-18 Колдонуучунун колдонмосу жана спецификациялары
Etekcity Digital Asma Scale (Model EHS-18) үчүн комплекстүү колдонмо, орнотууну, иштетүүнү, бирдикти конверсиялоо жана тара функциясы сыяктуу функцияларды, кам көрүү, тейлөө жана кепилдик маалыматын камтыйт. Таразаңызды үй тиричилигинде таразага кантип так колдонууну үйрөнүңүз.
Preview Жаңы Bright RC жүк ташуучу унаалар: моделдер, функциялар жана кол маалымат
New Bright RC жүк ташуучу унааларынын ассортиментин изилдеңиз, анын ичинде Reaper, Grave Digger жана Ford F150 сыяктуу популярдуу моделдер. Жаңы Bright алыстан башкаруучу унааңыз үчүн функциялар, өндүрүмдүүлүк жана инструкцияларга кире турган жер жөнүндө маалыматты табыңыз.
Preview HOFFEN электрондук санарип таразасы колдонуучусунун колдонмосу
HOFFEN электрондук санарип таразасынын колдонуучу колдонмосу, анда батареяны орнотуу, иштетүү, таразалоо процедуралары, бузулууларды оңдоо, мүнөздөмөлөр жана кам көрүү боюнча көрсөтмөлөр камтылган.
Preview Etekcity EHS-18 Digital Asma Scale User Manual
Etekcity EHS-18 Санарип асма таразасы үчүн колдонуучу колдонмосу, спецификацияларды, орнотууларды, иштетүүнү, кам көрүү, кепилдик жана коопсуздук маалыматын камтыйт.
Preview Plus-Plus Green Tree Building Instructions (4337-18)
A step-by-step guide to building the Plus-Plus Green Tree (model 4337-18). Learn how to assemble this creative construction toy with clear instructions and safety information.