Duravit D-Code 07053600092 Handrise Basin Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Duravit D-Code 07053600092 Handrise Basin. Сураныч, орнотууну баштоодон мурун бардык нускамаларды кылдаттык менен окуп чыгыңыз жана бул колдонмону келечектеги маалымат үчүн сактап коюңуз.

Коопсуздук маалыматы

Орнотуу жана колдонуу учурунда төмөнкү коопсуздук чараларын сактаңыз:

• Орнотууну баштоодон мурун бардык суу менен камсыздоо линиялары өчүрүлгөнүн текшериңиз.
• Кол кап жана көздү коргоо сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Керамикалык буюмдарды сынуудан же чирип кетүүдөн сактоо үчүн этияттык менен кармаңыз.
• Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу сантехникке кайрылыңыз.
• Do not use abrasive cleaners or harsh chemicals on the basin бети.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экенин текшериңиз:

• Duravit D-Code Handrise Basin (Модель: 07053600092)
• Fixings (Included)
• Аппараттык камсыздоо (камтылган)
• Installation Template (if applicable, check packaging)

Орнотуу жана орнотуу

This section outlines the steps for properly installing your handrise basin. Ensure you have all necessary tools and materials before proceeding.

Орнотууга чейинки текшерүүлөр

• б текшериңизasin for any damage prior to installation. Do not install damaged products.
• Confirm that the wall structure is adequate to support the weight of the basin and any associated plumbing.
• Ensure water supply and drainage connections are correctly positioned according to local plumbing codes.

Mounting the Basin

1. Determine the desired mounting height for the basin. The typical height for the top rim of a basin is 80-85 cm (31.5-33.5 inches) from the finished floor.
2. Mark the positions for the mounting bolts on the wall using the provided template or by carefully measuring the basin's fixing points.
3. Drill holes at the marked positions, ensuring they are appropriate for the supplied fixings.
4. Insert the wall plugs (if provided) and secure the mounting bolts into the wall. Ensure they are firmly anchored.
5. Carefully lift the basin and align the mounting holes on the basin with the bolts protruding from the wall.
6. b жылдырыңызasin onto the bolts. Install washers and nuts, then tighten them securely but do not overtighten, as this can crack the ceramic.
7. Connect the water supply lines to the faucet (not included) and the drain assembly to the basinБардык туташуулар суу өткөрбөй турганын текшериңиз.
8. Apply a bead of silicone sealant around the back edge of the basin where it meets the wall to prevent water ingress.

1-сүрөт: жогорудан ылдыйга view with key dimensions for the Duravit D-Code Handrise Basin. Dimensions include 345mm width, 360mm total width, 270mm depth, and 130mm from the back edge to the center of the tap hole.

2-сүрөт: Каптал view with key dimensions for the Duravit D-Code Handrise Basin. Dimensions include 160mm tap platform width, 45mm from back edge to basin rim, 130mm basin depth, 850mm recommended total height from floor, and specific measurements for mounting points (655mm, 605mm) and drain center (120mm).

Figure 3: Duravit D-Code 14 1/8" Handrise Basin, Alpine White, showcasing its design and tap platform.

Иштөө нускамалары

The Duravit D-Code Handrise Basin is designed for standard bathroom use. Operate the faucet (not included) as per its manufacturer's instructions to control water flow and temperature. The basin features a tap platform and a left hole tapping for faucet installation.

Техникалык тейлөө

Proper care will ensure the longevity and appearance of your Duravit basin.

• Тазалоо: Wipe with a dry cloth after each use to prevent water spots and mineral buildup. For deeper cleaning, use a mild, non-abrasive cleaner and a soft cloth. Rinse thoroughly with water and dry.
• Качуу: Do not use abrasive powders, scouring pads, strong acids, or alkaline cleaners, as these can damage the ceramic surface.
• Агызуу: Regularly clean the drain area to prevent blockages.

Проблемаларды чечүү

Эгер көйгөйлөргө туш болсоңуз, төмөнкү жалпы чечимдерди караңыз:

• Leaking around connections: Check all plumbing connections for tightness. Ensure thread sealant or plumber's tape was used correctly.
• Slow drainage: The drain may be partially clogged. Remove the drain stopper and clear any debris. If the issue persists, a plumber may be required.
• Water spots/stains: Refer to the cleaning instructions in the Maintenance section. Persistent hard water stains may require specialized ceramic cleaner.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the official Duravit webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Онлайн колдоо: www.duravit.us