AKG Pro Audio C414 XLII Condenser Microphone Instruction Manual

Introduction

The AKG Pro C414 XLII is a professional large-diaphragm condenser microphone designed for versatile audio capture. It features multiple polar patterns, attenuation levels, and bass-cut filters to adapt to various recording environments and sound sources. This manual provides essential information for the proper setup, operation, and care of your C414 XLII microphone.

Кутуда эмне бар

Your AKG C414 XLII package includes the following components:

• 1 x C414 XLII Microphone
• 1 x H85 Universal Shock Mount
• 1 x PF80 Pop Filter
• 1 x W414 Windscreen
• 1 x Metal Carrying Case

Figure 1: Included components of the AKG C414 XLII microphone package.

Жайгашуу

1. Амортизаторду бекитүү: Secure the C414 XLII microphone into the H85 Universal Shock Mount. The shock mount helps to isolate the microphone from vibrations and handling noise.
2. Mount to Stand: Attach the shock mount assembly to a microphone stand.
3. XLR кабелин туташтыруу: Connect a standard XLR cable (not included) to the microphone's XLR connector at the base. Ensure a secure connection.
4. Аудио интерфейсине туташуу: Connect the other end of the XLR cable to an audio interface or mixer that provides +48V phantom power. The C414 XLII requires phantom power to operate.
5. Attach Pop Filter/Windscreen: For vocal recordings, attach the PF80 Pop Filter to the microphone stand, positioning it between the vocalist and the microphone to reduce plosive sounds. For outdoor use or to minimize wind noise, use the W414 Windscreen.

Иштөө нускамалары

The AKG C414 XLII offers several adjustable settings to optimize performance for different recording scenarios.

1. Полярдык үлгүнү тандоо

The microphone features nine selectable polar patterns, allowing you to choose the directionality of sound capture. Use the switches on the front of the microphone to cycle through the patterns:

• Кардиоид: Picks up sound primarily from the front, rejecting sound from the sides and rear. Ideal for vocals and close-miking instruments.
• Figure of Eight: Picks up sound equally from the front and rear, rejecting sound from the sides. Useful for duets or capturing room ambiance.
• Hypercardioid: A tighter version of cardioid, offering more side rejection and a small lobe of sensitivity at the rear.
• аташы: Picks up sound equally from all directions. Suitable for capturing room sound or multiple sources.
• Wide Cardioid: A broader cardioid pattern, offering a wider pickup angle than standard cardioid.
• Additional intermediate patterns are also available.

Figure 2: Front of the C414 XLII with polar pattern selection switches.

2. Attenuation Levels (Pad)

The C414 XLII features three attenuation levels (-6 dB, -12 dB, -18 dB) to prevent overload when recording very loud sound sources. Use the switch on the back of the microphone to select the appropriate pad setting.

3. Bass-Cut Filters

Three different switchable bass-cut filters (40 Hz, 80 Hz, 160 Hz) are available to minimize unwanted low-frequency noise such as wind noise, stage vibration, or proximity effect. Use the switch on the back of the microphone to select the desired filter.

Figure 3: Back of the C414 XLII with attenuation and bass-cut filter switches.

Figure 4: Detailed diagram of C414 XLII controls including polar patterns, attenuation, and bass-cut filters.

Техникалык тейлөө

• Store the microphone in its metal carrying case when not in use to protect it from dust and physical damage.
• Микрофонду экстремалдык температурага же жогорку нымдуулукка дуушар кылуудан алыс болуңуз.
• Clean the microphone's exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Ensure the microphone is disconnected from phantom power before connecting or disconnecting cables.

Проблемаларды чечүү

If you experience issues with your AKG C414 XLII microphone, consider the following:

• Үн жок: Ensure +48V phantom power is enabled on your audio interface/mixer. Check all cable connections for security.
• Бурмаланган үн: If the sound is distorted, activate an attenuation pad (-6 dB, -12 dB, or -18 dB) on the microphone to reduce the input level, especially with loud sound sources.
• Excessive Low-End Noise: Engage one of the bass-cut filters (40 Hz, 80 Hz, or 160 Hz) to reduce unwanted low-frequency rumble or proximity effect.
• Үзүлгүс сигнал: Check XLR cable for damage or loose connections. Try a different cable if possible.

Техникалык шарттар

Кепилдик жана колдоо

The product warranty for AKG products applies only when the purchase is made from AKG Authorized North American Dealers. For technical support or further assistance, please refer to the official AKG webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз.