Central Pneumatic Air File Instruction Manual

1. Киришүү

The Central Pneumatic Air File is a compact and efficient pneumatic tool designed for material removal and filing in tight or hard-to-reach spots. This versatile tool utilizes compressed air to provide rapid filing action, making it suitable for various applications where precision and speed are required.

Негизги өзгөчөлүктөрү:

• Аба керектөө: Approximately 8.5 CFM (Cubic Feet per Minute)
• Иш басымы: Requires 90 PSI (Pounds per Square Inch) for optimal performance
• Төмөн ызы-чуу операциясы: Designed for reduced operational noise

Figure 1: The Central Pneumatic Air File shown with its four interchangeable files: flat cut, half round, round, and triangular. This image displays the main body of the air file, the air inlet, and the file тиркеме механизми.

2. Коопсуздук маалыматы

Always observe basic safety precautions when using this product to reduce the risk of personal injury and damage to the tool. Read and understand all instructions before operation.

• Тиешелүү жеке коргонуу шаймандарын (ЖКК), анын ичинде коопсуздук көз айнектерин, угууну коргоону жана кол каптарды кийиңиз.
• Иш аянты таза, жакшы жарык жана тоскоолдуктар жок болушун камсыз кылыңыз.
• Do not operate the air file if you are tired or under the influence of drugs, alcohol, or medication.
• Кандайдыр бир жөндөөлөрдү жасоодон, аксессуарларды алмаштыруудан же техникалык тейлөө иштерин жүргүзүүдөн мурун аба берүүчү түтүктү ажыратыңыз.
• Do not exceed the maximum recommended air pressure of 90 PSI.
• Keep hands and body parts clear of the moving file операция учурунда.
• Use only accessories and replacement parts recommended by the manufacturer.
• Куралды кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.

3. Пакеттин мазмуну

Пакетти ачканда, бардык компоненттер бар экенин жана бузулбаганын текшериңиз:

• Central Pneumatic Air File бирдиги
• Flat Cut File
• Жарым раунд File
• Тегерек File
• Үч бурчтуу File
• Көрсөтмө (бул документ)

If any items are missing or damaged, please contact Central Pneumatic customer service immediately.

4. Орнотуу

Proper setup is crucial for the safe and efficient operation of your air file.

4.1 Air Supply Connection:

1. Аба компрессоруңуз өчүрүлгөнүн жана аба багы бошотулганын текшериңиз.
2. Connect a standard 1/4 inch NPT air hose (not included) to the air inlet on the rear of the air file. Use thread sealant tape for a secure, leak-free connection.
3. Connect the other end of the air hose to your air compressor's regulated output.
4. Set your air compressor's regulator to 90 PSI. Do not exceed this pressure.

4.2 Compressor Requirements:

The performance of your air file is directly related to the capacity of your air compressor. Refer to the chart below for recommended compressor tank sizes based on usage:

Figure 2: This chart illustrates the recommended air compressor tank sizes for optimal performance of the air file. For continuous use, a 29+ gallon compressor is recommended. For intermittent use, 7-28 gallon compressors are suitable. 1-6 gallon compressors are not recommended.

4.3 Initial Lubrication:

Before first use, and regularly thereafter, add 3-5 drops of pneumatic tool oil (not included) into the air inlet of the tool. This lubricates the internal components and ensures smooth operation and longevity.

4.4 Attaching a File:

1. абаны камсыз кылуу file is disconnected from the air supply.
2. Identify the desired file type (flat cut, half round, round, or triangular) for your task.
3. Insert the shank of the file into the chuck opening at the front of the air file.
4. камсыз кылуу file by tightening the chuck collar or mechanism (refer to tool specific design for exact method, typically a set screw or quick-release). Ensure the file is firmly seated and cannot wobble.

5. Иштөө нускамалары

Once the air file is properly set up and connected to the air supply, you can begin operation.

1. Жумушчу бөлүгүн даярдоо: Secure the material you intend to file in a vise or clamp to prevent movement during operation.
2. Grip the Tool: Hold the air file firmly with both hands if possible, or with one hand providing stable control.
3. Куралды активдештирүү: Depress the trigger or lever located on the top of the tool to start the filing action. The file will begin to reciprocate rapidly.
4. Apply to Workpiece: Gently bring the moving file into contact with the workpiece. Apply light, consistent pressure. Avoid excessive force, as this can bog down the tool and reduce its effectiveness, potentially causing premature wear or damage.
5. Башкаруу кыймылы: жетектөө file along the desired path, allowing the tool to do the work. The different file shapes allow for various applications, such as flat surfaces, curves, or internal angles.
6. Куралды өчүрүү: Release the trigger to stop the filing action.
7. Inspect Work: Periodically stop and inspect your work to ensure you are achieving the desired result.

Эскертүү: The tool operates at a stroke rate of approximately 3,700 strokes per minute, providing fast material removal. Always maintain a firm grip and control.

6. Техникалык тейлөө

Regular maintenance will extend the life of your Central Pneumatic Air File and ensure its continued performance.

6.1 Майлоо:

• Add 3-5 drops of pneumatic tool oil into the air inlet before each use, or at least once daily if used frequently.
• Run the tool for a few seconds after oiling to distribute the lubricant.

6.2 Тазалоо:

• After each use, disconnect the air supply and wipe down the tool with a clean, dry cloth.
• Remove any debris or filings from the chuck area and the file itself. A stiff brush can be used for the files.

6.3 Сактоо:

• Store the air file in a clean, dry environment, away from excessive moisture or extreme temperatures.
• Ensure the tool is disconnected from the air supply before storage.

7. Кыйынчылыктарды

If you encounter issues with your Central Pneumatic Air File, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

8. Техникалык шарттар

9. Кепилдик жана колдоо

For information regarding warranty coverage, technical support, or replacement parts for your Central Pneumatic Air File, please refer to the warranty card included with your purchase or visit the official Central Pneumatic website. You may also contact their customer service directly for assistance.

Ар кандай кепилдик дооматтары үчүн сатып алуу дүмүрчөгүн сатып алуунун далили катары сактоо сунушталат.