Central Pneumatic Portable Abrasive Blaster Kit User Manual

1. Коопсуздук боюнча маанилүү маалымат

Read and understand this entire instruction manual before using this kit. Failure to follow all instructions may result in serious injury.

• Жеке коргонуу каражаттары (ЖКК): Always wear ANSI approved safety goggles, gloves, face mask, and hood when operating the abrasive blaster. Abrasive media can cause eye damage and other injuries.
• Коопсуз иш: Never point the sandblasting gun at your face or exposed portions of your body. Never point the gun at any person or animal.
• Иш чөйрөсү: The blasting medium will accumulate and cover items near the blasting area, potentially damaging the finish or contaminating moving parts. Ensure the work area is clear of unintended targets.
• Химиялык эскертүү: This product, when used for sand blasting and similar applications, produces chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5 et seq.)
• Do not remove any warning labels from the product.

2. Продукт бүтүп калдыview

The Central Pneumatic Portable Abrasive Blaster Kit is designed for efficient removal of paint, rust, graffiti, corrosion, and scale. It is a portable unit that requires an external air compressor for operation.

2.1 Негизги өзгөчөлүктөрү

• Hopper takes most abrasives: steel grit, glass beads, pecan shells, and more.
• Portable design for ease of use and transport.
• Requires a 1 HP or larger air compressor for optimal performance.

2.2 Камтылган компоненттер

• Blast Gun
• Hopper (50 lb. capacity)
• Material Hose (15 ft.)
• 3мм Hex ачкыч

Figure 1: The Central Pneumatic Portable Abrasive Blaster Kit, showing the gray hopper, coiled black material hose, and the silver blast gun. The hopper has a top opening for media and a handle for portability.

3. Орнотуу

1. Компоненттерди таңгактан чыгаруу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз жана кандайдыр бир бузулууларды текшериңиз.
2. Туташтыруу шланг: Attach the 15 ft. material hose securely to the blast gun and the hopper outlet. Ensure all connections are tight to prevent air or media leaks.
3. Аба компрессорун туташтыруу: Connect your air compressor (1 HP or larger, capable of 3.5 CFM at 50 PSI minimum) to the air inlet on the blast gun. Use an appropriate air hose and fittings (not included).
4. Бункерди толтуруу: Open the top of the hopper and carefully fill it with your chosen abrasive media (e.g., steel grit, glass beads, pecan shells). Do not overfill; leave some space for air circulation. The hopper has a 50 lb. capacity.
5. Иш аянтын даярдоо: Ensure the blasting area is well-ventilated and clear of any items that could be damaged by abrasive media. Set up appropriate containment if necessary.
6. ЖКК кийүү: Before proceeding, put on all required personal protective equipment, including safety goggles, gloves, face mask, and hood.

4. Иштөө нускамалары

1. Байланыштарды текшерүү: Double-check all hose and air connections to ensure they are secure.
2. Turn on Air Compressor: Start your air compressor and allow it to build up to the required pressure (minimum 50 PSI).
3. Test Blasting: Point the blast gun at a scrap piece of material or a designated test area. Depress the trigger to begin blasting. Adjust air pressure or media flow as needed to achieve the desired result.
4. Begin Blasting: Hold the blast gun at an appropriate distance and angle from the surface to be cleaned. Move the gun in a steady, even motion to ensure uniform coverage and material removal.
5. Monitor Media Level: Periodically check the abrasive media level in the hopper and refill as necessary.
6. Stop Blasting: Release the trigger to stop the flow of abrasive media. Turn off the air compressor when finished with the task.
7. Депрессуризация: Safely depressurize the system after use by disconnecting the air supply and bleeding any remaining air from the lines.

5. Техникалык тейлөө

• Колдонгондон кийин тазалоо: After each use, empty any remaining abrasive media from the hopper and clean the hopper and hoses to prevent clogging and corrosion.
• Түтүктөрдү жана туташтырууларды текшерүү: Regularly inspect the material hose and all connections for wear, cracks, or damage. Replace any worn or damaged parts immediately.
• Соплону текшерүү: Inspect the blast gun nozzle for wear. A worn nozzle can affect blasting performance. Replace if necessary.
• Туура сактоо: Store the abrasive blaster kit in a clean, dry place, away from moisture and extreme temperatures.

6. Кыйынчылыктарды

7. Техникалык шарттар

• Модель аты: Portable Abrasive Blaster Kit
• Модель номери: 37025
• Бренд: Борбордук пневматикалык
• Minimum Air Requirement: 3.5 PSI боюнча 50 CFM
• Хоппердин кубаттуулугу: 50 XNUMX фунт
• Шлангдын узундугу: 15 фут.
• Материал: Эритме болот
• Түсү: Silver
• Кубат булагы: Аба
• Элемент Салмагы: 6 фунт
• Продукциянын өлчөмдөрү: 32 x 20 x 20 дюйм
• Камтылган компоненттер: Blast Gun, Hopper, Material Hose, And 3mm Hex Key
• Сунушталган колдонуулар: Surface Preparation, Cleaning, Stripping

8. Кепилдик жана колдоо

For warranty information or technical support, please refer to the original purchase documentation or contact Central Pneumatic customer service directly. Keep your purchase receipt for warranty claims.

Бул продукт Кытайда өндүрүлгөн.