Okin 2-Button DC Lift Chair / Power Recliner Hand Control User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Okin 2-Button DC Lift Chair or Power Recliner Hand Control. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Продукт бүттүview

The Okin 2-Button Hand Control is designed for use with DC lift chairs and power recliners, providing simple and intuitive control over the chair's movement. It features two buttons for 'Up' and 'Down' functions, allowing users to adjust their chair to the desired position.

Figure 1: Okin 2-Button Hand Control. This image shows the black hand control unit with two white oval buttons (one for up, one for down) and a coiled cord leading to a 5-pin circular connector.

This hand control is compatible with various brands including Okin, Limoss, Action, Berkline, Comfort Chair, Golden, LazyBoy, Med-Lift, Mega Motion, and Pride chair motors.

Орнотуу жана орнотуу

Before installation, ensure your lift chair or power recliner is unplugged from the power outlet to prevent accidental operation or electrical shock.

1. Туташтыргычты аныктаңыз: Locate the existing hand control cable connected to your chair's motor or control box. The Okin 2-button hand control typically uses a 5-pin straight connector.

Figure 2: Detail of the 5-pin straight connector. This image highlights the circular 5-pin male connector on the hand control cable, with an inset showing the corresponding female port with five pin receptacles.
2. Эски башкарууну ажыратыңыз (эгер бар болсо): Carefully unplug the old hand control from the chair's motor or control box. Note the orientation of the connector if it's not keyed.
3. Жаңы башкарууну туташтырыңыз: Align the 5-pin connector of the new Okin hand control with the corresponding port on your chair's motor or control box. Gently push the connector in until it is firmly seated. Ensure the connection is secure.
4. Кабелди бекемдөө: Route the cable in a way that it will not be pinched or tangled during chair operation.
5. Күчтү калыбына келтирүү: Once the hand control is securely connected, plug your lift chair or power recliner back into the power outlet.

If you encounter difficulty, consult your chair's original manual or a qualified technician.

Иштөө нускамалары

The Okin 2-Button Hand Control provides simple operation for your lift chair or power recliner.

• "Up" Button: Press and hold the "Up" button (typically the top button) to raise the chair's footrest and/or recline the backrest, or to lift the chair to a standing assist position. Release the button to stop movement.
• "Down" Button: Press and hold the "Down" button (typically the bottom button) to lower the chair's footrest and/or bring the backrest upright, or to lower the chair from a standing assist position back to a seated position. Release the button to stop movement.

Always ensure the area around the chair is clear before operating to prevent obstructions or injury.

Техникалык тейлөө жана кам көрүү

Proper care will extend the life of your hand control.

• Тазалоо: Wipe the hand control with a clean, damp cloth. Do not use abrasive cleaners or immerse the control in water.
• Кабелдик башкаруу: Avoid kinking, pinching, or excessive pulling on the cable. Ensure it is not caught in moving parts of the chair.
• Сактагыч: When not in use for extended periods, store the hand control in a dry place away from direct sunlight and extreme temperatures.
• Текшерүү: Periodically inspect the cable and connector for any signs of wear, fraying, or damage. If damage is observed, discontinue use and replace the control.

Проблемаларды чечүү

If your hand control is not functioning as expected, try the following troubleshooting steps:

For issues not resolved by these steps, contact the manufacturer or a certified repair service.

Техникалык шарттар

• Бренд: Окин
• Модель номери: 8541831861
• Түсү: Кара
• Туташтыргыч түрү: 5-pin straight connector
• Элемент Салмагы: 7.4 унция
• Пакеттин өлчөмдөрү: 8.15 x 2.6 x 2.6 дюйм
• Шайкештик: Designed for DC lift chairs and power recliners; compatible with Okin, Limoss, Action, Berkline, Comfort Chair, Golden, LazyBoy, Med-Lift, Mega Motion, Pride, and other brands chair motors.

Кепилдик жана колдоо

For information regarding warranty coverage or technical support, please refer to the documentation provided with your original purchase or contact Okin customer service directly. Contact details can typically be found on the manufacturer's official webсайты же продукт сатуучу аркылуу.

Кошумча жардам алуу үчүн, сиз иш сапары менен болот Amazon'догу Okin дүкөнү.