1. Киришүү
The Peavey PV 5300 is a versatile all-in-one powered mixer designed for clear audio reproduction. It features up to four combination XLR and 1/4" inputs with premium Peavey mic preamps and delivers 200 watts of peak power. This unit incorporates the FLS Feedback Locating System to identify and eliminate feedback, along with footswitchable, built-in reverb. Connectivity options include 1/4", RCA, and 1/8" mini jacks.
Негизги өзгөчөлүктөрү:
- FLS Feedback Locating System for feedback suppression.
- Combination XLR and 1/4" input jacks for versatile connectivity.
- 5-band graphic EQ with FLS for precise tone shaping.
- Master mute function for channels 1-4.
- On-board digital reverb for enhanced sound.
2. Коопсуздук маалыматы
Please read and understand all safety instructions before operating the Peavey PV 5300 powered mixer. Retain this manual for future reference.
Маанилүү коопсуздук чаралары:
- Кубат булагы: Түзмөктү көрсөтүлгөн кубат булагына гана туташтырыңызtage as indicated on the rear panel. Ensure the voltage selector switch (115V/230V) is set correctly for your region.
- Негиздөө: This unit must be properly grounded to prevent electric shock. Do not defeat the grounding type plug.
- Нымдуулук: Do not expose the unit to rain or moisture. Do not use near water or in damp жерлер.
- Вентиляция: Адекваттуу вентиляцияны камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
- Жылуулук: Do not place near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Тейлөө: Бул аппаратты өзүңүз тейлөөгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
- Эритиндилер: Сактагычтарды түзмөктүн арткы панелинде көрсөтүлгөндөй түрдөгү жана бааланган сактагычтар менен гана алмаштырыңыз.

2.1-сүрөт: Rear panel of the Peavey PV 5300, illustrating power input, fuse, voltage selector, and speaker outputs. Note the safety warnings printed on the chassis.
3. Орнотуу
This section guides you through the initial setup of your Peavey PV 5300 powered mixer.
3.1 Физикалык жайгаштыруу
- Place the mixer on a stable, flat surface.
- Ensure there is sufficient space around the unit for proper ventilation.
- Avoid placing the unit near strong electromagnetic fields or other electronic devices that may cause interference.
3.2 Кубат туташтыруу
- Before connecting the power cord, verify the voltagарткы панелдеги селектордук которгуч туура томго коюлганtagсиздин аймагыңыз үчүн (115V же 230V).
- Connect the provided AC power cord to the IEC inlet on the rear panel of the mixer.
- Электр шнурунун экинчи учун жерге туташтырылган электр розеткасына сайыңыз.
- Ensure the power switch on the rear panel is in the 'OFF' position before plugging into the wall outlet.
3.3 Динамиктердин байланыштары
The PV 5300 features two speaker outputs (AMP 1 жана AMP 2) on the rear panel.
- Connect passive speakers to the speaker outputs using appropriate speaker cables.
- Ensure the speakers have a minimum impedance load of 4 ohms. Connecting speakers with lower impedance can damage the ampөмүрлүү.
- For optimal performance, use high-quality speaker cables with proper gauge for the length of the run.
3.4 Киргизүү байланыштары
The front panel provides various input options:

3.1-сүрөт: Front panel of the Peavey PV 5300, detailing input channels, equalization controls, and master section.
- Микрофон/Лин Киргизүүлөрү (1-4-каналдар): Use XLR cables for microphones or 1/4" cables for line-level instruments (e.g., keyboards, guitars with preamps). These are combination jacks.
- Media/MP3 Input (Channel 5): Use RCA cables for stereo audio sources or an 1/8" mini-jack for portable media players.
- Бут өчүргүч: Connect an optional footswitch to control reverb tip/reverb defeat.
- Rec Out: RCA outputs for connecting to a recording device.
- Mix to Ext Amp: 1/4" output to send the main mix to an external power ampөмүрлүү.
4. Иштөө нускамалары
This section provides detailed instructions for operating your Peavey PV 5300 powered mixer.
4.1 Күйгүзүү/өчүрүү
- Ensure all volume controls (channel levels and master volume) are set to their minimum positions before powering on.
- Арткы панелдеги кубат которгучун "ON" абалына коюңуз.
- To power off, first reduce all volume controls, then flip the power switch to 'OFF'.
4.2 Input Channel Controls (Channels 1-4)
- ЖОГОРКУ/ТӨМӨН ЭКВ: Adjusts the treble and bass frequencies for each channel. Turn clockwise to boost, counter-clockwise to cut.
- REVERB: Controls the amount of signal sent from the channel to the internal reverb effect.
- ДЕҢГЭЭЛ: Adjusts the individual channel's volume in the main mix.
- CLIP көрсөткүчү: Illuminates when the input signal is too strong, indicating potential distortion. Reduce the input level if this light frequently illuminates.
4.3 Негизги бөлүмдөрдү башкаруу
- MUTE INPUTS 1-4: A switch to instantly mute or unmute channels 1 through 4.
- REVERB ДЕҢгээли: Controls the overall level of the reverb effect in the main mix.
- MAIN EQ (FLS Feedback Locating System): A 5-band graphic equalizer. The FLS system uses LEDs on each EQ band to indicate frequencies where feedback is occurring. When feedback is detected, the corresponding LED will light up, allowing you to reduce that specific frequency band to eliminate the feedback.
- AMP ДЕҢГЭЭЛ: Displays the output level of the amplifier. Monitor this to avoid clipping.
- МАСТЕР КӨЛӨМҮ: Миксердин жалпы чыгаруу көлөмүн көзөмөлдөйт.
4.4 Негизги операция кадамдары
- Connect all microphones, instruments, and speakers as described in the Setup section.
- Ensure all channel LEVEL and MASTER VOLUME controls are at minimum.
- Power on the mixer.
- Gradually increase the MASTER VOLUME to a low listening level.
- For each active input channel, slowly increase its LEVEL control until the desired volume is achieved. Watch the CLIP indicator and reduce the input level if it flashes excessively.
- Adjust the HIGH and LOW EQ controls for each channel to shape the tone.
- If using reverb, adjust the channel REVERB control and the main REVERB LEVEL.
- If feedback occurs, observe the FLS LEDs on the MAIN EQ. Reduce the corresponding frequency band(s) until the feedback is eliminated.
- Adjust the MASTER VOLUME for the overall desired sound level.
5. Техникалык тейлөө
Proper maintenance ensures the longevity and optimal performance of your Peavey PV 5300.
5.1 Тазалоо
- Тазалоодон мурун ар дайым электр шнурын ажыратыңыз.
- Аппараттын сыртын сүртүү үчүн жумшак, кургак чүпүрөктү колдонуңуз.
- өжөр кир үчүн, бир аз гamp жумшак самын менен кездеме, андан кийин кургак чүпүрөк колдонсо болот.
- Абразивдүү тазалоочу каражаттарды, эриткичтерди же момдорду колдонбоңуз, анткени алар жасалгасына зыян келтириши мүмкүн.
- Суюктуктарды тешиктерден жана башкаруу элементтеринен алыс кармаңыз.
5.2 Сактоо
- Миксерди күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
- If storing for an extended period, cover the unit to protect it from dust.
5.3 Сактагычты алмаштыруу
If the unit fails to power on, the fuse may need replacement. The fuse holder is located on the rear panel.
- Электр шнурын электр розеткасынан ажыратыңыз.
- Locate the fuse holder on the rear panel (refer to Figure 2.1).
- Carefully pry open the fuse holder cover.
- Remove the old fuse and replace it with a new fuse of the exact same type and rating. The required fuse rating is printed near the fuse holder (e.g., T1AL/250V for 115V operation, T0.5AL/250V for 230V operation).
- Сактандыргыч кармагычтын капкагын бекем жабыңыз.
- Reconnect the power cord and test the unit. If the new fuse blows immediately, there may be a more serious internal issue requiring professional service.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your Peavey PV 5300.
6.1 Үн чыгышы жок
- Күчтү текшерүү: Ensure the unit is powered on and the power cord is securely connected. Check the fuse (refer to Section 5.3).
- Үн деңгээли: Verify that the MASTER VOLUME and individual channel LEVEL controls are not at minimum.
- Динамик байланыштары: Confirm speakers are correctly connected to the AMP 1/AMP 2 outputs and speaker cables are functional.
- Киргизүү байланыштары: Ensure microphones or instruments are properly connected to the correct input jacks.
- Үнсүз которуштуруу: Check if the MUTE INPUTS 1-4 switch is engaged.
6.2 Feedback (High-Pitched Squeal)
- FLS System: Observe the FLS LEDs on the MAIN EQ. Reduce the gain on the indicated frequency band(s).
- Микрофондун жайгашуусу: Move microphones further away from speakers or position them behind the speakers.
- Киргизүү пайдасы: Reduce the LEVEL control for the offending microphone channel.
- Overall Volume: Lower the MASTER VOLUME if necessary.
6.3 Бурмаланган үн
- Клип көрсөткүчтөрү: Check if any channel CLIP indicators are frequently lighting up. Reduce the LEVEL for those channels.
- Amp Деңгээл: камсыз кылуу AMP LEVEL meter is not consistently in the red zone. Reduce MASTER VOLUME if it is.
- Динамик Импеданс: Verify that your speakers meet the minimum 4-ohm impedance requirement.
- Кабелдин бүтүндүгү: Check all audio cables for damage or loose connections.
7. Техникалык шарттар
Technical specifications for the Peavey PV 5300 All In One Powered Mixer:
- Модель номери: PV5300
- Элемент Салмагы: 16.9 фунт (7.67 кг)
- Продукциянын өлчөмдөрү: 17.8 x 11.8 x 11.5 дюйм (45.2 x 30 x 29.2 см)
- Чыгуу кубаттуулугу: 200 Ватт (чоку)
- Каналдардын саны: 5 (4 Mic/Line, 1 Media/MP3)
- Байланыш технологиясы: XLR, 1/4", RCA, 1/8" mini-jack
- Теңдөө: 5-band graphic EQ with FLS (Feedback Locating System)
- Эффекттери: On-board digital reverb
- Баяндамачы AmpЛификация түрү: Активдүү
- Кубат булагы: Corded Electric (115V/230V selectable)
8. Кепилдик жана колдоо
Peavey products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Peavey website. In case of technical issues or questions not covered in this manual, please contact Peavey customer support or an authorized service center.
Кошумча ресурстар жана продукт маалыматы үчүн, баш багыңыз Peavey Store on Amazon.





