1. Киришүү жана Продукт бүттүview
This manual provides essential information for the safe and effective use of the GE SELA36AT0150 Bolt-On Mount Type SEL Molded Case Circuit Breaker. This current-limiting circuit breaker is designed for industrial and commercial applications, providing protection against overcurrents and short circuits.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Current Limiting Circuit Breaker: Designed to limit the magnitude and duration of short-circuit currents.
- 150 Amps Max | 150 A Rating Plug: Configured for a maximum current of 150 Amps with a corresponding rating plug.
- 3 Pole, 480/600 VAC: Suitable for three-phase alternating current systems up to 600 Volts.
- Spectra RMS Series: Part of the GE Spectra RMS line, known for advanced protection features.
- Bolt-On Mount: Designed for secure bolt-on installation.
Сүрөт 1: Алдыңкы view of the GE SELA36AT0150 Circuit Breaker, showing the ON/OFF switch and product labels.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Installation, maintenance, and troubleshooting of electrical equipment should only be performed by qualified and licensed electricians. Failure to follow these instructions can result in serious injury, death, or property damage.
- Always disconnect power before working on electrical circuits or equipment.
- Тийиштүү жеке коргонуу шаймандарын (ЖКК), анын ичинде изоляцияланган кол каптарды жана көздү коргоону колдонуңуз.
- Verify all connections are secure and properly torqued according to specifications.
- Ensure the circuit breaker's ratings match the system requirements.
3. Орнотуу жана орнотуу
The GE SELA36AT0150 is a bolt-on mount circuit breaker. Proper installation is crucial for safe and reliable operation.
3.1 Орнотууга чейинки текшерүүлөр
- Confirm the circuit breaker's voltage, current, and interrupting ratings are compatible with the electrical system.
- Автоматтык өчүргүчтө кандайдыр бир физикалык бузулуу бар-жоктугун текшериңиз. Бузулган агрегаттарды орнотууга болбойт.
- Монтаждоо бетинин таза, кургак жана структуралык жактан бекем болушун камсыз кылыңыз.
3.2 Монтаждоо боюнча нускамалар
- De-energize the electrical panel or system where the breaker will be installed. Verify zero voltage мультиметр менен.
- Position the circuit breaker in the designated slot or mounting location.
- Secure the breaker using appropriate bolts and hardware for bolt-on mounting. Ensure it is firmly seated.
- Connect the load and line conductors to the appropriate terminals. The breaker includes a set of bottom lugs.
- Refer to the product label for specific wire ranges and torque specifications:
- Wire Range: #12 - 3/0 CU, #12 - 3/0 AL
- Torque: #12-#10: 35 lb-in, #8-#3: 100 lb-in, #2-3/0: 150 lb-in
- Бардык туташуулардын бекемдигин жана туура изоляциясын эки жолу текшериңиз.
Figure 2: Close-up of the circuit breaker's main label, detailing Cat No., Amp rating, Voltage, Pole configuration, Rating Plug Type, Lug Data, Wire Range, and Torque specifications.
Figure 3: Close-up of the circuit breaker's interrupting rating label, showing RMS Symmetrical Amps at various voltages (240V, 480V, 600V) and international standards.
4-сүрөт: Арткы view of the GE SELA36AT0150 Circuit Breaker, showing the bolt-on mounting points and terminal connections.
4. Иштөө нускамалары
The GE SELA36AT0150 circuit breaker is designed for simple operation, primarily acting as an ON/OFF switch and an automatic protective device.
4.1 Күйгүзүү/өчүрүү
- To turn the circuit ON, firmly push the handle to the "ON" position.
- To turn the circuit ӨЧҮРҮҮ, firmly push the handle to the "OFF" position.
4.2 Tripping and Resetting
If an overcurrent or short circuit condition occurs, the breaker will automatically "trip" to the center position (between ON and OFF) to protect the circuit. To reset a tripped breaker:
- First, move the handle completely to the "OFF" position. This resets the internal mechanism.
- Investigate and resolve the cause of the trip (e.g., overloaded circuit, short circuit).
- Once the issue is resolved, firmly push the handle to the "ON" position to restore power.
- If the breaker immediately trips again, do not attempt to reset it repeatedly. Consult a qualified electrician.
5. Техникалык тейлөө
Ажыраткычтар көбүнчө минималдуу тейлөөнү талап кылат. Бирок, үзгүлтүксүз иштөөнү камсыз кылуу үчүн мезгил-мезгили менен текшерүү сунушталат.
- Визуалдык текшерүү: Жыл сайын өчүргүчтүн физикалык бузулуусунун, түсүнүн өзгөрүшүнүн же бош туташуулардын белгилерин текшерип туруңуз.
- Тазалоо: Keep the area around the breaker clean and free of dust and debris. Use a dry, non-conductive cloth for cleaning. Do not use liquids.
- Туташуу текшерүүлөрү: Periodically (e.g., every 3-5 years, or as per local codes) have a qualified electrician check the tightness of terminal connections.
- Сыноо: For critical applications, periodic testing of the breaker's trip mechanism by a qualified professional may be required.
Эскертүү: Do not attempt to open or repair the circuit breaker. There are no user-serviceable parts inside.
6. Кыйынчылыктарды
Бул бөлүмдө сиздин автоматтык өчүргүчүңүз менен кездешүүсү мүмкүн болгон жалпы маселелер каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Брейдер тез-тез сапарга чыгат. | Ашыкча жүктөлгөн чынжыр, кыска туташуу, жерге туташуу же туура эмес шайман. | Контурдагы жүктү азайтыңыз. Приборлорду розеткадан ажыратыңыз. Зымдардын бузулганын текшериңиз. Эгер көйгөй чечилбесе, квалификациялуу электрикке кайрылыңыз. |
| Breaker баштапкы абалга келтирилбейт. | Persistent fault (short circuit/overload) or internal breaker damage. | Ensure the handle is pushed fully to "OFF" before attempting to reset. If it still won't reset, do not force it. Call a qualified electrician. |
| Түзмөккө кубат жок, бирок өчүргүч КҮЙҮК. | Loose connection, wiring issue, or internal breaker failure. | This indicates a serious issue. Immediately turn off the breaker and consult a qualified electrician. Do not attempt to diagnose or fix yourself. |
For any issues not covered here, or if troubleshooting steps do not resolve the problem, always contact a qualified and licensed electrician.
7. Техникалык шарттар
Detailed technical specifications for the GE SELA36AT0150 Circuit Breaker:
| Атрибут | Нарк |
|---|---|
| Модель номери | SELA36AT0150 |
| Бренд | General Electric |
| Учурдагы рейтинг | 150 Amps |
| Тtage Рейтинг | 480/600 Бунёдкор |
| Поляктардын саны | 3 |
| Ажыраткычтын түрү | Standard, Current Limiting, Molded Case |
| Монтаж түрү | Болт-On Mount |
| Interrupting Rating @ 240 VAC | 100,000 Amps |
| Interrupting Rating @ 480 VAC | 65,000 Amps |
| Interrupting Rating @ 600 VAC | 25,000 Amps |
| Rating Plug Type | SRPE150A |
| Rating Plug Inst. Adjustable Range | 450-1991 A (Lo to Hi) |
| Продукциянын өлчөмдөрү (D x W x Y) | 4" x 4" x 6.5" (болжол менен) |
| Салмагы | 4.8 фунт (болжол менен) |
| Дата биринчи жеткиликтүү | 11-октябрь, 2012-жыл |
8. Кепилдик жана колдоо
For specific warranty information regarding your GE SELA36AT0150 Circuit Breaker, please refer to the documentation provided at the time of purchase or contact General Electric directly. As a general guideline, electrical components typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, service, or to inquire about replacement parts, please contact General Electric customer service or visit their official webсайт. Сиз да зыярат кылсаңыз болот Amazon'догу GE дүкөнү for more information on GE products.
Always ensure that any work on electrical systems is performed by qualified and licensed professionals.
9. Расмий продукт Videos
No official product videos from the seller were found for this specific model in the provided data. For general product information or installation guides, please check the manufacturer's official webсайт же ыйгарым укуктуу дистрибьюторлор.
