Cameo Light CLP64RGB10BS LED PAR Headlight User Manual

1. Киришүү

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. Коопсуздук нускамалары

• Түзмөктү иштетүүдөн мурун бул колдонмону толугу менен окуп чыгыңыз.
• Бул колдонмону келечекте маалымат алуу үчүн сактаңыз.
• Аппаратты ар дайым жерге туташтырылган розеткага туташтырыңыз.
• Аппаратты жамгырга же нымга тийгизбеңиз.
• Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында жетиштүү желдетүүнү камсыз кылыңыз.
• Жарык булагына түздөн-түз көз тийбеңиз.
• Тазалоодон же тейлөөдөн мурун электр кубатынан ажыратыңыз.
• Оңдоо иштери квалификациялуу кызматкерлер тарабынан гана жүргүзүлүшү керек.

3. Пакеттин мазмуну

Таңгактан чыгарганда бардык буюмдар бар экенин текшериңиз:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• Көрсөтмө (бул документ)
• Электр кабели

4. Продукт бүтүп калдыview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

4.1-сүрөт: Фронт view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

4.2-сүрөт: Side view of the PAR headlight, illustrating its compact design and ventilation slots.

4.3-сүрөт: Арткы view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

4.4-сүрөт: Деталдаштырылган view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. Орнотуу

5.1 Монтаждоо

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 Кубат туташтыруу

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

5.3 DMX туташуу (кошумча)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. Иштөө

6.1 Башкаруу панели

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• РЕЖИМ: Cycles through the main menu options and confirms selections.
• Өйдө: Маанилерди көбөйтөт же меню параметрлери аркылуу өйдө жылдырат.
• ТӨМӨН: Маанилерди азайтат же меню параметрлери боюнча ылдый жылдырат.

6.2 Иштөө режимдери

The CLP64RGB10BS supports several operating modes:

• DMX режими: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• Master/Slave режими: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• Өз алдынча режим: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 DMX канал режимдери

The device offers two DMX channel configurations:

• 4-канал режими: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• 6-канал режими: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7. Техникалык тейлөө

7.1 Тазалоо

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• Use a soft, lint-free cloth to wipe the exterior casing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• Желдетүүчү тешиктердин чаңдан жана таштандылардан тазаланганын текшериңиз.

7.2 Сактоо

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.