1. Киришүү
This manual provides essential information for the proper installation, operation, and maintenance of your Pyle PLPW8D 8-inch Car Subwoofer Speaker. Please read these instructions thoroughly before installation and retain this manual for future reference.
2. Продукциянын өзгөчөлүктөрү
- 800 Ватт кубаттуулугу: 400 Watt RMS to 800 Watt peak power for high sound resonance.
- Dual Voice Coil: Dual 4 Ohm impedance, allowing wiring configurations for 2 Ohm or 8 Ohm. Features a 1.5-inch 4-layer voice coil for durability.
- Treated Foam Surround: Constructed with specially treated foam surround for durability and non-fatiguing suspension.
- Non-Pressed Paper Cone: Clean-cut design with a non-pressed paper cone and black plastic basket.
- 60oz Magnet: Built with a 40 oz. magnet for powerful audio performance.
- Жогорку сезгичтик: Sensitivity (SPL) of 89dB for clear audio reproduction.
- Compact Mounting: 3.7-inch mounting depth, suitable for most car, boat, or RV audio systems. Overall diameter is 8.2 inches.
3. Пакеттин мазмуну
- Pyle PLPW8D 8-inch Car Subwoofer Speaker
- Керектүү кабелдер
- Орнотуу шаблону
- Колдонмо
4. Орнотуу жана орнотуу
Proper installation is crucial for optimal performance and longevity of your subwoofer. Ensure all connections are secure and correctly polarized.
4.1 Mounting the Subwoofer
The Pyle PLPW8D features a 3.7-inch mounting depth and an 8.2-inch overall diameter. Use the provided installation template to mark and cut the mounting hole in your enclosure. Secure the subwoofer using appropriate fasteners.

Figure 1: Subwoofer dimensions including 8.2-inch diameter and 3.7-inch mounting depth.

Figure 2: Illustration of the 3.7-inch mounting depth for the Pyle PLPW8D subwoofer.
4.2 Wiring the Dual 4 Ohm Voice Coils
The PLPW8D features dual 4 Ohm voice coils, offering flexibility in wiring configurations to match your amplifier's impedance requirements. You can wire the voice coils in series for an 8 Ohm load or in parallel for a 2 Ohm load.
Series Wiring (8 Ohm Total Impedance)
To achieve an 8 Ohm total impedance, connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Then, connect the remaining free positive terminal to the ampкөтөргүчтүн оң чыгышы жана калган бош терс терминалы ampкөтөргүчтүн терс натыйжасы.
Parallel Wiring (2 Ohm Total Impedance)
To achieve a 2 Ohm total impedance, connect the positive terminals of both voice coils together. Then, connect the negative terminals of both voice coils together. Connect the combined positive terminals to the ampкөтөргүчтүн оң чыгышы жана бириккен терс терминалдары ampкөтөргүчтүн терс натыйжасы.

3-сүрөт: Арткы view of the Pyle PLPW8D subwoofer showing the dual 4 Ohm impedance terminals.

Figure 4: Close-up of the 1.5-inch 4-layer dual voice coil and treated foam surround.
4.3 Amplifier Connection Guidance
Сиздин камсыз кылуу amplifier is stable at the impedance load you choose for your subwoofer. Incorrect impedance matching can lead to amplifier overheating or damage to the subwoofer.
Video 1: This video demonstrates general wiring principles for connecting a single voice coil 4 Ohm subwoofer to an amplifier. While the PLPW8D has dual voice coils, the amplifier connection concepts remain similar. Refer to section 4.2 for specific dual voice coil wiring instructions.
5. Иштөө нускамалары
Once installed, adjust your amplifier's gain, crossover, and bass boost settings to achieve the desired sound. Start with low settings and gradually increase them to avoid distortion or damage to your subwoofer and other audio components.
- Көзөмөлдү алуу: Adjust to match the output voltagсиздин башкы бирдигиңиздин e.
- Төмөн өткөрүүчү чыпка (LPF): Set to filter out high frequencies, allowing only bass frequencies to pass through to the subwoofer.
- Subsonic чыпкасы: Эгер сизде бар болсо amplifier, set to filter out extremely low frequencies below the subwoofer's effective range to prevent damage.
6. Техникалык тейлөө
To ensure the longevity and performance of your Pyle PLPW8D subwoofer, follow these simple maintenance guidelines:
- үзгүлтүксүз тазалоо: Gently wipe the cone and surround with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or excessive moisture.
- Байланыштарды текшерүү: Мезгил-мезгили менен бардык зымдарды байланыштарды текшерип туруңуз, алар коопсуз жана коррозияга учурабайт. Бошоң байланыштар начар иштешине же бузулушуна алып келиши мүмкүн.
- Ашыкча күч алуудан качыңыз: Do not continuously operate the subwoofer at maximum volume or with excessive bass boost, as this can cause overheating and damage to the voice coils.
- Туура кампа: Ensure the subwoofer is installed in a suitable enclosure that is free from leaks or damage, as this affects sound quality and subwoofer protection.
- Температураны көзөмөлдөө: Avoid exposing the subwoofer to extreme temperatures or direct sunlight for prolonged periods, which can degrade materials.
7. Кыйынчылыктарды
Сабвуфериңизде көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү чечүү кадамдарын караңыз:
- Үн жок:
- Check all power and ground connections to the ampөмүрлүү.
- Verify the remote turn-on wire is connected and receiving power.
- RCA кабелдеринин башкы бирдикке жана экөөнө тең туташтырылганын текшериңиз ampөмүрлүү.
- Confirm speaker wires are correctly connected to the subwoofer and amplifier, with correct polarity.
- Текшерүү amplifier's protection mode indicator.
- Бурмаланган үн:
- Кыскартуу ampкөтөрүүчү пайда орнотуулары.
- Check for proper LPF and subsonic filter settings.
- Ensure subwoofer is not over-powered or under-powered by the ampөмүрлүү.
- Динамик зымдарын кыска туташуулар же бузулуулар үчүн текшериңиз.
- Алсыз басс:
- Көбөйтүү ampкөтөргүч акырындык менен пайда болот.
- LPF жана бассты күчөтүү жөндөөлөрүн тууралаңыз.
- Verify subwoofer wiring impedance matches amplifier's optimal load.
- Check for correct phase setting on the ampкөтөргүч (эгерде бар болсо).
8. Техникалык шарттар
| Модель аты | PLPW8D |
| Динамик түрү | Сабвуфер |
| Сабвуфердин диаметри | 8 дюйм |
| Динамиктин максималдуу чыгаруу күчү | 800 Ватт |
| Импеданс | Кош 4 Ом |
| Үн катушкасы | 1.5-inch 4-Layer Dual Voice Coil |
| Магнит Салмагы | 40 унция. |
| Сезимталдуулук (SPL) | 89 дБ |
| Монтаждоо тереңдиги | 3.7 дюйм |
| Жалпы диаметри | 8.2 дюйм |
| Материал | Металл, пластик |
| Түс | Кара |
| Байланыш технологиясы | Зымдуу |
| Продукциянын өлчөмдөрү | 4.3"D x 8.2"W x 8.2"H |
| Элемент Салмагы | 2 фунт |
9. Кепилдик жана колдоо
This Pyle PLPW8D subwoofer comes with a one-year limited warranty from the date of purchase. For warranty claims or technical support, please refer to the contact information provided in your purchase documentation or visit the official Pyle webсайт.
10. Коопсуздук боюнча маанилүү маалымат
Сунуш 65 Эскертүү: Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян алып келген химиялык заттарды камтыйт.





