Hunter ELC-601i

Hunter ELC-601i Irrigation Timer

User Manual

1. Киришүү

The Hunter ELC-601i is a reliable and user-friendly 6-station indoor irrigation timer designed to automate your watering schedule. This controller allows you to manage up to six independent watering zones, ensuring efficient and precise irrigation for your landscape. Its non-volatile memory retains programming even during power outages, жан дүйнө тынчтыгын камсыз кылат.

2. Коопсуздук маалыматы

3. Продукт бүтүп калдыview

The ELC-601i features an intuitive interface with a clear LCD display and easy-to-use buttons for programming and manual operation.

Фронт view of the Hunter ELC-601i irrigation timer

1-сүрөт: Фронт view of the Hunter ELC-601i irrigation timer, showing the LCD display, control buttons (PRG, +, -, left, right, enter), and indicators for System Off, Seasonal Adjustment, Water Days, Current Time/Day, Start Times, and Run Times.

Башкаруу панелинин өзгөчөлүктөрү:

4. Орнотуу

4.1 Контроллерди орнотуу

  1. Choose a suitable indoor location near a standard electrical outlet, away from direct sunlight and extreme temperatures.
  2. Securely mount the controller to a wall using appropriate screws and anchors.

4.2 Wiring the Valves

4.3 Connecting the Transformer

5. Баштапкы орнотуу жана программалоо

5.1 Учурдагы убакытты жана күндү орнотуу

  1. Press the PRG button until the 'Current Time/Day' indicator is active.
  2. Use the Plus (+) and Minus (-) buttons to adjust the time.
  3. Use the Right Arrow button to move between hours, minutes, and AM/PM (if applicable).
  4. Use the Plus (+) and Minus (-) buttons to set the current day of the week.
  5. Ырастоо үчүн Enter баскычын басыңыз.

5.2 Programming Watering Schedules (Programs A and B)

The ELC-601i features two independent programs, A and B, each capable of up to four start times per day.

  1. Программаны тандоо: Press the PRG button to cycle through programming options until 'Start Times' is active. Use the Right Arrow button to select Program A or B.
  2. Баштоо убакыттарын коюу: For each program, set up to four daily start times. Use the Plus (+) and Minus (-) buttons to adjust the time and the Right Arrow to move between start times.
  3. Иштөө убакыттарын коюу: After setting start times, the 'Run Times' indicator will become active. For each station (1-6), use the Plus (+) and Minus (-) buttons to set the watering duration from 0 minutes to 4 hours, in 1-minute increments.
  4. Суу күндөрүн белгилөө: The 'Water Days' indicator will become active. Choose your watering schedule:
    • 7-Day Calendar: Select specific days of the week (e.g., MO, WE, FR).
    • Аралыктар: Set watering to occur every 1 to 31 days (e.g., every 3 days).
    • Так/жуп күндөр: Water on odd or even calendar days.
    Use the arrow buttons to navigate and Plus (+) / Minus (-) to select.
  5. Press the Enter button to save settings and exit programming mode.

5.3 Seasonal Adjustment

The seasonal adjustment feature allows you to globally increase or decrease watering durations for all programmed stations without reprogramming each one individually. This is useful for adapting to changing weather conditions.

6. Иштөө нускамалары

6.1 Автоматтык иштетүү

Once programmed, the controller will automatically activate the watering zones according to your set schedules.

6.2 Кол менен иштетүү

Бир станцияны же бардык станцияларды кол менен иштетүү үчүн:

  1. Press and hold the Enter button (return arrow) for a few seconds.
  2. Use the Right Arrow button to select the desired station or 'ALL' for all stations.
  3. Use the Plus (+) and Minus (-) buttons to set the manual run time.
  4. Press the Enter button to start manual watering.
  5. To stop manual watering, press the Enter button again or wait for the set time to expire.

6.3 System Off

To temporarily suspend all automatic watering:

7. Техникалык тейлөө

8. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Контроллердин дисплейи бош.No power or faulty transformer.Check power outlet. Ensure transformer is securely connected. Try unplugging and re-plugging the transformer.
Stations do not water.System Off mode active, programming error, or wiring issue.Check if 'System Off' is active and deactivate if necessary. Verify programming (start times, run times, water days). Inspect valve wiring and common wire connection.
Difficulty programming.Unfamiliarity with interface.Review Section 5. Initial Setup and Programming. Refer to official Hunter support videos online for visual guidance.
Watering occurs at incorrect times.Incorrect current time/day or program start times.Verify and adjust the current time and day. Recheck all programmed start times for Programs A and B.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For information regarding warranty coverage, technical support, or service, please contact Hunter customer service or visit the official Hunter webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Тектеш документтер - ELC-601i

Preview Hunter Pro-C/PCC Irrigation Controller User Manual
Comprehensive user manual for the Hunter Pro-C/PCC irrigation controller, covering installation, setup, operation, programming, and troubleshooting for residential and light commercial use.
Preview Hunter Pro-C Irrigation Controller User Manual and Installation Guide
Comprehensive user manual and installation guide for the Hunter Pro-C irrigation controller, covering features, programming, wiring, and troubleshooting for residential and commercial installations. Includes indoor and outdoor versions, diagrams, and specifications.
Preview Hunter Pro-C турак жай жана коммерциялык сугат контроллеринин колдонмосу | Орнотуу жана пайдалануу боюнча колдонмо
Hunter Pro-C сугаруу контроллери үчүн толук колдонуучу колдонмосу жана орнотуу боюнча колдонмо. Техникалык мүнөздөмөлөрү, компоненттери, зымдары, программалоосу, өркүндөтүлгөн функциялары, көйгөйлөрдү чечүү жана башкалар жөнүндө билип алыңыз.
Preview Hunter X-CORE® турак жай сугаруу контроллери: Колдонуучунун колдонмосу жана программалоо боюнча колдонмо
Hunter X-CORE® турак жай сугаруу контроллери үчүн толук колдонуучу колдонмосу жана программалоо боюнча көрсөтмөлөр. Газонго жана бакчага натыйжалуу кам көрүү үчүн акылдуу сугаруу системаңызды кантип орнотууну, программалоону жана мүчүлүштүктөрдү оңдоону үйрөнүңүз.
Preview Hunter X2 сугаруу контроллери: программалоо жана орнотуу боюнча колдонмо
Hunter X2 сугаруу контроллерин программалоо жана орнотуу боюнча кеңири колдонмо. WAND модулун колдонуп, датаны/убакытты, баштоо убактысын, иштөө убактысын, суу күндөрүн кантип коюуну жана Hydrawise менен интеграциялоону үйрөнүңүз. Зымдар жана электрдик маалымат камтылган.
Preview Hunter Pro-C ирригациялык контроллер: Колдонуучунун колдонмосу жана орнотуу боюнча колдонмо
Hunter Pro-C сериясындагы турак жай жана жеңил коммерциялык сугаруу контроллерлери үчүн кеңири колдонуучунун колдонмосу жана орнотуу боюнча нускамалар. Орнотуу, программалоо, өркүндөтүлгөн функциялар, көйгөйлөрдү чечүү жана техникалык мүнөздөмөлөрдү камтыйт.