Продукт бүттүview
This manual provides essential information for the proper setup, operation, and maintenance of your Hamilton Plate Caster with Brake. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
Image showing the Hamilton Plate Caster, featuring a red polyurethane wheel, a black combination brake lever, and a silver metal plate for mounting. The wheel has a 6-inch diameter and 2-inch width.
Орнотуу жана орнотуу
The Hamilton Plate Caster is designed for plate mounting. Proper installation is crucial for safety and performance.
Монтаждоо көрсөтмөлөрү:
- Ensure the mounting surface is flat, stable, and capable of supporting the caster's load capacity.
- Position the caster plate on the desired mounting location. The top plate measures 4-1/2 inches in length by 4 inches in width.
- Mark the bolt hole locations. The bolt hole patterns are 3 inches x 3 inches and 2-5/8 inches x 3-5/8 inches.
- Drill pilot holes if necessary, ensuring they are appropriate for 0.375-inch bolts.
- Secure the caster using appropriate bolts, washers, and nuts. Tighten all fasteners securely to prevent loosening during operation.
- Verify that the caster is firmly attached and can swivel freely before applying load.
Иштөө нускамалары
This swivel caster is equipped with a combination brake for enhanced control.
Айлануучу функциясы:
The caster features a swivel rig, allowing for 360-degree rotation of the wheel assembly. This provides excellent maneuverability for equipment and carts.
Тормоздун иштөөсү:
- To engage the brake: Press down firmly on the black brake lever. This action simultaneously locks both the swivel mechanism and the wheel, preventing movement.
- To disengage the brake: Lift the brake lever upwards until it clicks into the unlocked position. The wheel and swivel will then move freely.
- Always engage the brake when the equipment needs to remain stationary, especially on inclines or uneven surfaces.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your caster.
- Тазалоо: Clean the wheel and swivel assembly periodically to remove dirt, debris, and foreign objects that may impede movement or brake function. Use a damp cloth; avoid harsh chemicals that could damage the polyurethane or plastic components.
- Майлоо: While the caster features a roller bearing, periodic inspection of the swivel raceway and wheel axle for smooth operation is recommended. Lubricate with a suitable grease if any stiffness is observed.
- Аппараттык текшерүү: Regularly check all mounting bolts and nuts for tightness. Re-tighten as necessary to prevent loosening due to vibration or heavy loads.
- Коррозияга каршылык: The caster and hardware have a corrosion-resistant zinc-plated finish. However, prolonged exposure to harsh environments may still cause wear. Inspect for signs of corrosion and address them promptly.
- Дөңгөлөктү текшерүү: Inspect the Poly-Tech polyurethane wheel for cuts, cracks, or excessive wear. Replace the wheel if significant damage is present to maintain floor protection and rolling ease.
Проблемаларды чечүү
This section addresses common issues you might encounter with your caster.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Wheel does not roll smoothly. |
|
|
| Caster does not swivel freely. |
|
|
| Brake does not engage or disengage properly. |
|
|
Техникалык шарттар
| Модель номери | S-BC-6NF |
| Бренд | HamiltonBuhl |
| Жүктөө жөндөмдүүлүгү | 850 фунт |
| Дөңгөлөктүн диаметри | 6 дюйм |
| Wheel Tread Width | 2 дюйм |
| Тоо бийиктиги | 7.5 дюйм |
| Plate Length | 4.5 дюйм |
| Табактын туурасы | 4 дюйм |
| Материал | Polyurethane (Poly-Tech Duralast on Polypropylene Wheel) |
| Wheel Color | Red tread on white center |
| Caster Rig Type | Cold Forged |
| Подшипник түрү | Roller Bearing (3/4 inch straight) |
| Температура диапазону | -30°F жана 180°F |
| Химиялык каршылык | Жогорку |
| Пакеттин өлчөмдөрү | 7.6 x 7.4 x 3.8 дюйм |
| Элемент Салмагы | 4.95 фунт |
Кепилдик жана колдоо
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Hamilton Caster products are known for their durability and quality.
If you require technical assistance or have questions regarding your Hamilton Plate Caster, please contact the seller or manufacturer's customer support. Ensure you have your model number (S-BC-6NF) and purchase details available when seeking support.
Manufacturer: Hamilton Caster
