Introduction
The JTS CX-500F Miniature Condenser Woodwind Instrument Microphone is designed to capture the nuanced sound of various woodwind instruments, including flutes and piccolos. It features a subminiature full-range omni-directional gold-plated condenser capsule, known for delivering clean, detailed, and natural sound quality. The microphone is bundled with a dynamic design microphone holder, ensuring a secure and scratch-free fit on instruments of different sizes. The CX-500F is terminated with a 4-pin mini XLR plug for wireless applications and includes the MA-500 adapter for wired use via a standard XLR connection.
Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- JTS CX-500F Miniature Condenser Microphone
- Dynamic Design Microphone Holder
- MA-500 XLR Adapter
- Various Clamp Кыстармалар
- Көбүктүү айнектер
- Коргоочу куту
Орнотуу жана орнотуу
Микрофонду орнотуу
The CX-500F features a dynamic design microphone holder engineered for secure attachment to various woodwind instruments. The dual proprietary injection design prevents scratching your instrument.
- Тийиштүү cl тандаңызamp inserts from the provided set that best fit the diameter of your instrument.
- Carefully insert the chosen clamp inserts into the microphone holder.
- Position the microphone holder on your instrument, ensuring a stable and secure fit. The flexible mini gooseneck allows for precise positioning of the microphone capsule to capture optimal sound while minimizing unwanted air noise.
- Tighten the holder gently until it grips securely, avoiding excessive force.
Микрофонду туташтыруу
The CX-500F can be used in both wired and wireless configurations.
- Зымдуу туташуу: Connect the microphone's 4-pin mini XLR plug to the MA-500 adapter. Then, connect the MA-500 adapter's standard XLR output to your mixer, audio interface, or amplifier. The MA-500 adapter requires phantom power (typically +48V) from your connected device to operate.
- Зымсыз туташуу: The microphone is compatible with standard T-4 wireless belt packs, such as JTS wireless or Shure Wireless systems. Connect the microphone's 4-pin mini XLR plug directly to the input of your compatible wireless belt pack transmitter. Refer to your wireless system's manual for specific setup instructions.
Операция
Негизги колдонуу
Once properly mounted and connected, the CX-500F is ready for use. Its omni-directional pickup pattern captures sound from all directions, providing a natural and detailed response for wind instruments. The microphone's frequency response ranges from 20 Hz to 20,000 Hz, ensuring a full spectrum of sound is captured.
Аудио эске алуулар
- Phantom Power: Ensure your mixer or audio interface provides adequate phantom power (+48V) when using the MA-500 adapter for wired applications.
- Микрофондун жайгашуусу: Experiment with the microphone's position on the instrument using the flexible gooseneck to find the optimal sound. Aim to minimize direct air blasts while capturing the instrument's full tonal range.
- Жеңиш Сtaging: Adjust the input gain on your mixer or wireless receiver to achieve a strong signal without clipping or distortion.
Техникалык тейлөө
Proper care will extend the life and performance of your JTS CX-500F microphone.
- Тазалоо: Use a soft, dry cloth to wipe down the microphone and holder after each use. Avoid using harsh chemicals or abrasive materials.
- Кабельге кам көрүү: The microphone cable is thin and requires careful handling. Avoid sharp bends, kinks, or excessive pulling to prevent damage.
- Сактагыч: When not in use, store the microphone and its accessories in the provided protective carrying case to shield them from dust, moisture, and physical impact.
- Шамдын айнектери: Regularly inspect and replace foam windscreens if they become worn or dirty to maintain optimal sound quality and hygiene.
Проблемаларды чечүү
If you encounter issues with your CX-500F microphone, consider the following:
- Үн чыгышы жок:
- Ensure phantom power is enabled on your mixer/interface if using the MA-500 adapter.
- Бардык кабелдик туташуулардын туура отургузулгандыгын жана бүтүндүгүн текшериңиз.
- Verify the input channel on your mixer/receiver is active and gain is appropriately set.
- Пикир маселелери:
- Due to its omni-directional pattern, the microphone can be prone to feedback in live situations. Try repositioning the microphone, adjusting monitor levels, or using a graphic equalizer to cut problematic frequencies.
- Ensure the microphone is not pointed directly at speakers or monitors.
- Бурмаланган үн:
- Reduce the input gain on your mixer or wireless receiver.
- Бузулган кабелдерди же туташтыргычтарды текшериңиз.
- Microphone Not Staying in Place:
- Ensure the correct clamp inserts are used for your instrument's size.
- Tighten the microphone holder securely, but do not overtighten.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Микрофон форма фактору | Gooseck |
| Полярдык үлгү | Unidirectional (Note: Product description states omni-directional, but specifications list unidirectional. For best performance, treat as omni-directional as per product description.) |
| Frequency Response | 20 Гц - 20 000 Гц |
| Аудио сезгичтиги | 44 дБ |
| Байланыш технологиясы | XLR (via MA-500 adapter) / 4-pin mini XLR (for wireless) |
| Туташтыргыч түрү | XLR (MA-500) |
| Power Source | Зымдуу электр (фантомдук кубаттуулукту талап кылат) |
| Элементтин өлчөмдөрү (L x W x Y) | 6.73 x 0.24 x 0.24 дюйм |
| Элемент Салмагы | 1.6 унция |
| Түс | Алтын |
| Өндүрүүчү | JTS |
| Модель номери | CX-500F |
Кепилдик жана колдоо
For warranty information and technical support, please refer to the official JTS website or contact your authorized JTS dealer. Keep your purchase receipt as proof of purchase for any warranty claims.
