1. Киришүү
This instruction manual provides essential information for the safe and proper installation, operation, and maintenance of your Eaton CS120LA 20-Amp 120/277-volt Commercial Grade Single Pole Compact Toggle Switch. Please read this manual thoroughly before beginning any work.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Risk of electric shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before wiring. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
- Орнотуудан же тейлөөдөн мурун электр энергиясы өчүрүлгөнүн текшериңиз.
- Жез зымды гана колдонуңуз.
- Көрсөтүлгөн көлөмдөн ашпаңызtage жана учурдагы рейтингдер.
- This switch is designed for indoor use in dry locations.
3. Продукциянын өзгөчөлүктөрү
- Rated for 20-amps and 120/277-volts, suitable for switching one light from one location.
- Heavy-duty cam action mechanism ensures quiet switch operation.
- Equipped with a ground screw terminal as standard.
- Ideal for fluorescent lighting fixtures.
- Features side wire terminals that accept up to No. 10 solid or stranded wire.
- Color-coded strap markings: Blue for 15-amps, Red for 20-amps.
4. Орнотуу жана орнотуу
Professional installation is recommended for this electrical device. Follow these general steps for installation:
- Кубатты өчүрүү: Locate the circuit breaker or fuse that controls the power to the switch location and turn it OFF. Verify power is off using a voltage сыноочу.
- Remove Old Switch (if applicable): Carefully remove the wall plate and unscrew the old switch from the electrical box. Disconnect the wires, noting their connections.
- Зымдарды даярдоо: Strip approximately 1/2 inch of insulation from the ends of the circuit wires if necessary. Ensure wires are clean and free of damage.
- Wire the New Switch:
- Connect the ground wire (bare copper or green) to the green ground screw terminal on the switch.
- Connect the incoming hot wire to one of the brass side screw terminals.
- Connect the outgoing load wire to the other brass side screw terminal.
- Ensure all connections are tight and secure. The side wire terminals accept up to No. 10 solid or stranded wire.
- Которгучту орнотуу: Carefully fold the wires into the electrical box and secure the switch to the box with the provided screws.
- Дубал плитасын орнотуу: Attach the decorative wall plate over the switch.
- Күчтү калыбына келтирүү: Электрди өчүргүчтөн же сактагыч кутучасынан кайра күйгүзүңүз.
- Сыноо операциясы: Test the switch to ensure it functions correctly.
Image 1: Eaton CS120LA Toggle Switch showing the side wiring terminals and internal components. Note the "SPEC GRADE" marking and the "OFF" position of the toggle.
5. Иштөө нускамалары
The Eaton CS120LA is a single-pole toggle switch designed for simple ON/OFF control of a lighting fixture or other electrical load from a single location.
- To turn the connected device ON, push the toggle lever to the "ON" position (typically upwards).
- To turn the connected device OFF, push the toggle lever to the "OFF" position (typically downwards).
6. Техникалык тейлөө
The Eaton CS120LA switch requires minimal maintenance. Ensure the switch and wall plate are kept clean and free of dust. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Periodically check for loose connections or signs of wear. If any issues are observed, turn off power and consult a qualified electrician.
7. Кыйынчылыктарды
If the switch is not functioning as expected, consider the following common issues:
- Кубат жок: Check the circuit breaker or fuse. Ensure it is in the "ON" position.
- Бошоң байланыштар: Turn off power and carefully inspect all wire connections at the switch and the fixture. Tighten any loose connections.
- Туура эмес зымдар: Review the installation steps to ensure the switch is wired correctly.
- Damaged Switch: If the switch appears physically damaged or emits unusual odors, turn off power immediately and replace the switch.
Эгерде мүчүлүштүктөрдү оңдоо кадамдары көйгөйдү чечпесе, квалификациялуу электрикке кайрылыңыз.
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Итон |
| Модель номери | CS120LA |
| Монтаж түрү | Дубалга орнотуу |
| Тtage | 120/277 Вольт AC |
| Учурдагы рейтинг | 20 Amps |
| Иштөө режими | КҮЙГҮЗҮҮ ӨЧҮРҮҮ |
| Которуу түрү | Single Pole Toggle |
| Байланыш материалы | Жез |
| Зым шайкештиги | Up to No. 10 solid or stranded wire |
| Продукциянын өлчөмдөрү | 1.64 x 1.64 x 1.64 дюйм |
| Элемент Салмагы | 2.39 унция |
| Түс | Жеңил бадам |
9. Кепилдик жана колдоо
The Eaton CS120LA Commercial Grade Single Pole Compact Toggle Switch comes with a 10 жылдык чектелген кепилдик that protects against defects in material and workmanship. For warranty claims or technical support, please contact Eaton customer service directly or visit their official webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
For further assistance, please refer to the official Eaton webсайтка же кардарларды тейлөөгө кайрылыңыз.
