1. Киришүү
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Legrand DNX 4500 Circuit Breaker. This device is designed for the protection of your electrical installation, ensuring safety and reliability. Please read this manual thoroughly before proceeding with any installation or operation.
The Legrand DNX 4500 is a Uni + Neutral 230 V circuit breaker with a 4.5 kA breaking capacity, suitable for various electrical panel applications. It is compatible with Legrand Drivia electrical panels and horizontal combs, conforming to the NF EN 60898-1 standard.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Electrical work should only be performed by qualified and authorized personnel. Failure to follow these safety instructions can result in electric shock, fire, serious injury, or death.
- Always disconnect power at the main service panel before installing, servicing, or removing the circuit breaker.
- Изоляцияланган кол каптар жана коргоочу көз айнек сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) колдонуңуз.
- Бардык зымдарды туташтыруу коопсуз жана жергиликтүү жана улуттук электр коддоруна ылайык экенин текшериңиз.
- Эгер өчүргүч бузулуп калса, колдонбоңуз.
- Томду ырастаңызtage and current ratings of the circuit breaker match your application requirements.
- This device is designed for indoor use in dry locations unless otherwise specified.
3. Продукт бүтүп калдыview
The Legrand DNX 4500 Circuit Breaker (Model LEG406773) is a miniature circuit breaker designed for overcurrent protection in electrical circuits. Key features include:
- Uni + Neutral 230 V: Designed for single-phase circuits with neutral.
- DNX² 4500 - 4.5 kA: Indicates a breaking capacity of 4.5 kiloamperes.
- Учурдагы рейтинг: 10 Amps.
- Туташуу түрлөрү: Supports screw/screw and car/car connections for versatile installation.
- Feed Controls: Integrated controls for managing power flow.
- Шайкештик: Compatible with Legrand Drivia electrical panels and horizontal combs.
- Тастыктоо: Conforms to NF EN 60898-1 standard.
Сүрөт 1: Алдыңкы view of the Legrand DNX 4500 Circuit Breaker. This image shows the grey casing, the toggle switch for operation, and the branding.
4. Орнотуу жана орнотуу
Installation of the Legrand DNX 4500 Circuit Breaker must be performed by a qualified electrician in accordance with all applicable electrical codes and standards.
- Электр энергиясын өчүрүү: Before beginning any work, ensure that the main power supply to the electrical panel is completely disconnected and locked out.
- Монтаждоо: The circuit breaker is designed for panel mounting. Securely attach the breaker to the DIN rail within the electrical panel.
- Зымдарды туташтыруу:
- Connect the incoming phase (Uni) and neutral (N) wires to the designated terminals.
- Чыгуучу жүк зымдарын тиешелүү терминалдарга туташтырыңыз.
- Ensure all screw terminals are tightened to the manufacturer's specified torque to prevent loose connections and overheating.
- The circuit breaker supports both screw/screw and car/car connection types.
- Шайкештикти текшерүү: Ensure compatibility with Legrand Drivia electrical panels and horizontal combs for proper integration.
- Текшерүү: After installation, double-check all connections and ensure the breaker is securely mounted.
- Электр энергиясын калыбына келтирүү: Once installation is complete and verified, restore power to the main service panel.
5. Иштөө нускамалары
The Legrand DNX 4500 Circuit Breaker operates as a protective device for your electrical circuits.
- ON позициясы: To energize the circuit, push the toggle switch to the "ON" position (typically upwards).
- ӨЧҮРҮҮ абалы: To de-energize the circuit, push the toggle switch to the "OFF" position (typically downwards).
- Чагылган позициясы: If an overcurrent or short circuit occurs, the circuit breaker will automatically trip to an intermediate position (often center or fully down, depending on the model) to protect the circuit.
- Ачууланган өчүргүчтү баштапкы абалга келтирүү:
- Биринчиден, сапардын себебин аныктап, оңдоңуз (мисалы, ашыкча жүктөлгөн шаймандарды электр розеткасынан ажыратыңыз, кыска туташууларды оңдоо).
- Push the toggle switch firmly to the "OFF" position.
- Then, push the toggle switch to the "ON" position to restore power.
- If the breaker trips immediately again, do not attempt to reset it repeatedly. Consult a qualified electrician.
6. Техникалык тейлөө
The Legrand DNX 4500 Circuit Breaker is designed for long-term, reliable operation with minimal maintenance. However, periodic checks are recommended:
- Визуалдык текшерүү: Мезгил-мезгили менен автоматтык өчүргүчтө физикалык бузулуунун, түсүнүн өзгөрүшүнүн же туташтыруунун боштугунун белгилерин текшерип туруңуз.
- Тазалоо: Keep the area around the circuit breaker clean and free from dust and debris. Use a dry, soft cloth for cleaning; never use liquids.
- Кесиптик текшерүү: It is advisable to have your electrical system, including circuit breakers, inspected by a qualified electrician periodically (e.g., every 5-10 years) to ensure continued safe operation.
- Р эмесampэ: Never attempt to open or repair the circuit breaker yourself. Refer all servicing to qualified personnel.
7. Кыйынчылыктарды
If you encounter issues with your Legrand DNX 4500 Circuit Breaker, consider the following common scenarios:
- Көп кездешүүчү кырсыктар:
- Ашыкча жүктөө: The circuit may be drawing too much current. Unplug some devices from the circuit.
- Кыска туташуу: A direct connection between live and neutral/ground wires. This requires immediate investigation by an electrician.
- Бузулган шайман: An appliance connected to the circuit may be defective. Try isolating appliances to identify the culprit.
- Сыноочу баштапкы абалга келтирилбейт:
- Ensure the cause of the trip has been resolved.
- Push the switch firmly to the "OFF" position before attempting to reset to "ON".
- If it still doesn't reset, the breaker itself might be faulty, or there's a persistent fault in the circuit. Do not force it; consult an electrician.
- Электр кубаты жок (Үзгүч КҮЙҮК):
- Check if other breakers in the panel are tripped.
- Verify main power supply to the panel.
- Inspect wiring connections for looseness or damage (with power off).
- If all checks fail, the breaker may be defective.
For persistent issues or if you are unsure, always contact a qualified electrician.
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Легранд |
| Модель номери | LEG406773 |
| Учурдагы рейтинг | 10 Amps |
| Тtage | 230 вольт |
| Ажыраткычтын түрү | Standard (Miniature Circuit Breaker) |
| Үзүү жөндөмдүүлүгү | 4.5 кА |
| Поляктардын саны | 1 (Uni + Neutral) |
| Монтаж түрү | Panel Mount (DIN rail compatible) |
| Туташуу түрлөрү | Screw/Screw, Car/Car |
| Түс | Боз |
| Материал | Полиамид-имид |
| Элемент Салмагы | 3.52 унция |
| Сертификация | NF EN 60898-1 |
| UPC | 793518542826 |
9. Кепилдик жана колдоо
Legrand products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or visit the official Legrand webсайт.
For technical support, product inquiries, or assistance with installation, please contact Legrand customer service or your local authorized distributor. Contact information can typically be found on the official Legrand webсайт: www.legrand.com
