Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Belimo 2" 2-way Ball Valve CV 46. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product. This valve is designed for reliable flow control in various industrial and commercial applications.
Коопсуздук маалыматы
Adhering to safety guidelines is crucial for preventing injury and equipment damage. Always follow these precautions:
- Always disconnect power to the system before attempting any installation, maintenance, or troubleshooting procedures.
- Ensure the valve's pressure and temperature ratings are compatible with the system's operating conditions.
- Орнотуу жана техникалык тейлөө учурунда коопсуздук көз айнегин жана кол капты кошо алганда, тиешелүү жеке коргонуу каражаттарын (ЖКК) кийиңиз.
- Refer to local codes and regulations for proper installation and wiring practices.
- Do not attempt to disassemble the valve beyond what is described in this manual.
Жайгашуу
Proper setup ensures optimal performance and longevity of the valve.
- Текшерүү: Before installation, visually inspect the valve for any signs of damage during shipping.
- Системаны даярдоо: Ensure the piping system is clean and free of debris, scale, or foreign objects that could impede valve operation or cause damage.
- Монтаждоо: The Belimo 2" 2-way Ball Valve CV 46 is designed for inline installation. Install the valve in the correct flow direction as indicated by any arrows on the valve body.
- Байланыштары: Use appropriate tools to tighten the National Pipe Tapered (NPT) connections. Apply suitable thread sealant (e.g., PTFE tape or pipe dope) to ensure a leak-free seal. Do not overtighten, as this can damage the threads or valve body.
- Actuator Installation (if applicable): If an actuator is to be installed, follow the specific instructions provided with the actuator for mounting and wiring.
This image shows the Belimo 2" 2-way ball valve, highlighting its compact design and connection points. The valve features a robust construction suitable for various industrial and commercial applications. Note the threaded ends for secure inline installation.
Иштөө нускамалары
The Belimo 2" 2-way Ball Valve CV 46 controls fluid flow by rotating a spherical ball with a bore through its center. It is designed for on/off control or throttling applications, depending on the actuator and control system.
- Автоматташтырылган операция: If equipped with an actuator, the valve's operation will be controlled by the building management system (BMS) or other control logic. Ensure the actuator is correctly wired and calibrated according to its specific manual and system requirements.
- Кол менен иштөө: For valves with a manual handle, the valve can be opened or closed by rotating the handle. A quarter-turn (90 degrees) typically moves the valve from a fully open to a fully closed position, or vice versa. Ensure the handle is fully engaged in the desired position (open or closed) for proper flow control.
- Агым багыты: The valve is designed for bi-directional flow, but always observe any flow direction indicators on the valve body or system piping.
Техникалык тейлөө
The Belimo 2" 2-way Ball Valve CV 46 is designed for minimal maintenance. However, periodic checks can help ensure long-term reliable operation.
- Визуалдык текшерүү: Regularly inspect the valve and its connections for any signs of leaks, corrosion, or external damage. Address any issues promptly.
- Туташуу тыгыздыгы: Periodically check the tightness of the pipe connections. Re-tighten if necessary, but avoid overtightening.
- Тазалоо: Keep the exterior of the valve clean and free of dust or debris. Do not use harsh chemicals that could damage the valve materials.
- Майлоо: The internal components of this ball valve typically do not require lubrication.
- Actuator Maintenance: If an actuator is installed, refer to its specific manual for any required maintenance procedures.
Проблемаларды чечүү
Бул бөлүмдө сиз кабылышы мүмкүн болгон жалпы маселелерди чечүү жолдору каралган.
| Маселе | Мүмкүн себеп | Чечим |
|---|---|---|
| Клапан толук ачылбай/жабылбай жатат | Obstruction in pipeline; Actuator not calibrated; Manual handle not fully engaged. | Check for debris in the line; Verify actuator calibration and wiring; Ensure manual handle is turned to its full stop. |
| Туташуулардан агып кетүү | Improperly tightened connections; Damaged threads; Insufficient thread sealant. | Inspect pipe threads; Re-tighten connections using appropriate torque; Reapply thread sealant. |
| Reduced flow through valve | Valve not fully open; Partial blockage in pipeline. | Ensure valve is in the fully open position; Check for blockages upstream or downstream of the valve. |
Техникалык шарттар
Key technical specifications for the Belimo 2" 2-way Ball Valve CV 46:
| Спецификация | Нарк |
|---|---|
| Өндүрүүчү | Belimo |
| Бөлүмдүн номери | B249 |
| Элемент Салмагы | 6 фунт |
| Элемент моделинин номери | BELI B249 |
| Форма | Inline |
| Элементтин пакетинин саны | 1 |
| Сертификация | ccv |
| Inlet Connection түрү | Улуттук чоор конус |
| Клапан түрү | Шар клапан |
| UPC | 791617213302 |
Кепилдик жана колдоо
For detailed warranty information, technical support, or service inquiries regarding your Belimo 2" 2-way Ball Valve CV 46, please contact Belimo customer service directly. It is recommended to keep your purchase receipt and product model number readily available when contacting support for faster assistance. You can find contact information on the official Belimo webсайтында же ыйгарым укуктуу дистрибьюторуңуз аркылуу.
