Stack ST700M-01075 Dash Tachometer User Manual

1. Киришүү

The Stack ST700M-01075 is an advanced Dash Tachometer designed for high-performance automotive applications. This innovative instrument integrates multiple display technologies into a single 80 mm (3 3/8 inch) diameter unit, providing comprehensive vehicle data at a glance. It combines a tachometer, speedometer, oil pressure gauge, temperature gauge, sequential shift light, voltmeter, and lap timing functionality. This manual provides essential information for the proper installation, operation, and maintenance of your ST700M-01075 Dash Tachometer.

2. Негизги өзгөчөлүктөрү

• Интегралдык дисплей: Combines Tachometer, Speedometer, Oil Pressure Gauge, Temperature Gauge, Sequential Shift Light, Voltmeter, and Lap Timing into a single 80 mm instrument.
• Акылдуу сигнализация системасы: Provides adjustable alarm levels for all monitored parameters to suit individual requirements.
• Configurable Inputs: Features two user-configurable analogue channels for various sensor types (Water Temperature, Oil Temperature, Air Temperature, Axle Temperature, Gear Temperature, Oil Pressure, Fuel Pressure, or Boost Pressure).
• Peak Value Tell-Tales: Records and displays peak values for all monitored parameters.
• Комплекстүү комплект: Supplied with a mounting bracket, switch kit, separate professional wiring looms, and this manual.
• Adjustable Back-lighting: Features adjustable white LED back-lighting for optimal visibility in various conditions.
• Туруктуу дизайн: Fully sealed against water and dust for reliable performance in demanding environments.
• Шайкештик: Designed for all negative earth ignition systems.
• Performance Options: Supports optional accessories such as the ST546 Lap Timing System, ST7090 Lap & Split Time Memory, and ST670 Wheel Speed Sensor for enhanced functionality.

3. Орнотуу жана орнотуу

Proper installation is crucial for the accurate and reliable operation of your ST700M-01075 Dash Tachometer. It is recommended that installation be performed by a qualified professional.

3.1 Mounting the Tachometer

Use the supplied mounting bracket to securely install the tachometer in your vehicle's dashboard. Ensure the mounting location provides clear visibility and does not obstruct other critical controls or gauges.

3.2 Зымдарды туташтыруу

The ST700M-01075 comes with professional wiring looms. Refer to the detailed wiring diagrams provided in the separate wiring manual for specific connections. Key connections include:

• Электр камсыздоо: Connect to a switched 12V power source and a reliable ground.
• Ignition Signal: Connect to the vehicle's ignition system for RPM readings.
• Сенсордук киргизүүлөр: Connect the speed sensor, and any optional analogue sensors (e.g., oil pressure, temperature) to their designated configurable channels. Sensors must be ordered separately.
• Lap Timing Beacon Receiver: If using the lap timing system, plug the receiver into the standard dash wiring harness.

Ensure all connections are secure and properly insulated to prevent short circuits or interference.

This image displays the main face of the ST700M-01075 Dash Tachometer. It features a clear white dial with RPM markings from 0 to 10.75k, an orange indicator needle, and four red LED shift lights at the top. Below the shift lights, a digital LCD screen shows a time reading, likely for lap timing, in green digits. The 'STACK' logo is visible on the right side, and a small warning icon is present on the left.

4. Операция

4.1 Кубат күйгүзүлдү

Upon vehicle ignition, the tachometer will power on and perform a self-check. The needle will sweep across the dial, and the digital display will illuminate.

4.2 Reading the Tachometer

The large analog dial displays engine RPM in thousands (kRPM). The orange needle indicates the current engine speed. The sequential shift lights will illuminate progressively as the engine approaches the user-defined shift points, providing a visual cue for optimal gear changes.

4.3 Санариптик дисплейдин функциялары

The integrated digital display provides various readings depending on the configured settings and connected sensors. This may include:

• Lap Timing: If the lap timing system is active, the display will show lap times with an accuracy of 1/100th of a second as the vehicle passes the track-side beacon.
• Спидометр: If the ST670 wheel speed sensor is connected, the display will show vehicle speed in MPH or km/h, configurable by the user.
• Сенсор окуулары: Displays values from configured analogue channels (e.g., oil pressure, water temperature).
• Вольтметр: Shows the vehicle's battery voltage.

4.4 Акылдуу сигнализация системасы

The intelligent alarm system monitors all parameters. If a monitored value exceeds or falls below its pre-set alarm level, a visual warning (e.g., flashing display, warning icon) will activate. Alarm levels can be adjusted through the unit's menu system (refer to the detailed operating guide for menu navigation).

4.5 Adjusting Back-lighting

The white LED back-lighting level can be adjusted to suit ambient light conditions for optimal readability. Consult the detailed operating guide for instructions on adjusting this setting.

5. Техникалык тейлөө

The Stack ST700M-01075 Dash Tachometer is designed for durability and requires minimal maintenance. However, regular checks can ensure its longevity and continued performance.

• Тазалоо: Clean the display and housing with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз, анткени алар бетке зыян келтириши мүмкүн.
• Туташуу текшерүүлөрү: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent readings or malfunctions.
• Сенсор текшерүү: If experiencing inconsistent readings from connected sensors, check the sensor units and their wiring for any signs of damage or wear.
• Курчап турган чөйрөнү коргоо: Although sealed against water and dust, avoid prolonged exposure to extreme conditions or direct high-pressure water sprays.

6. Кыйынчылыктарды

If you encounter issues with your ST700M-01075 Dash Tachometer, consider the following basic troubleshooting steps before seeking professional assistance:

• Кубат жок/Дисплей:
  • Check the power supply connection and ensure the vehicle's ignition is on.
  • Verify the ground connection is secure.
  • Check any inline fuses if applicable.
• RPM көрсөткүчү туура эмес:
  • Ensure the ignition signal wire is correctly connected.
  • Verify the tachometer is configured for your vehicle's ignition system (e.g., number of cylinders).
• Incorrect Sensor Readings (e.g., Oil Pressure, Temperature):
  • Check the sensor's wiring connection to the tachometer.
  • Ensure the correct sensor type is selected in the tachometer's configuration settings for that channel.
  • Inspect the sensor unit itself for damage.
• Lap Timing Issues:
  • Ensure the lap timing beacon receiver is properly connected and positioned.
  • Verify the track-side beacon is operational and correctly aligned.
• Display Malfunctions (e.g., flickering, partial display):
  • Check power and ground connections for stability.
  • Ensure the unit is not exposed to extreme temperatures outside its operating range.

For persistent issues or complex problems, please contact Stack customer support or a certified service technician.

7. Техникалык шарттар

8. Кепилдик жана колдоо

8.1 Кепилдик маалыматы

The Stack ST700M-01075 Dash Tachometer comes with a 1-year competition warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accident, or unauthorized modifications.

8.2 Кардарларды колдоо

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Stack customer support. Refer to the official Stack webакыркы байланыш маалыматы үчүн сайтка же продуктунун таңгагына кайрылыңыз.

Онлайн ресурстар: Visit the official Stack website for additional product information, FAQs, and updated documentation.