1. Киришүү
The Robinair 13119 Premium High Vacuum Pump Oil is specifically engineered to ensure optimal performance and longevity of your vacuum pump. This oil is formulated to maintain maximum viscosity even at high operating temperatures and provides excellent cold weather properties for easier pump starts. It is carefully bottled and quality tested to ensure minimal moisture content, which is crucial for maintaining the oil's purity and the pump's ability to achieve a deep vacuum.
1-сүрөт: Robinair 13119 Premium High Vacuum Pump Oil, 1 Pint bottle. This oil is designed for high vacuum pumps, offering superior thermal stability and low moisture content.
2. Баштапкы орнотуу жана даярдоо
Before using the Robinair 13119 Premium High Vacuum Pump Oil, ensure your vacuum pump is clean and free from contaminants. Always refer to your vacuum pump's specific instruction manual for detailed oil change procedures and recommended oil capacities.
2.1 Preparing the Oil Bottle
- Remove the red cap from the bottle's nozzle.
- Carefully cut the tip of the nozzle to create an opening suitable for pouring.
- Remove the protective foil seal from the bottle opening.
The bottle features a clear strip on the side with measurement markings (in milliliters and fluid ounces) to help you monitor the remaining oil volume.
3. Иштөө нускамалары
This oil is intended for use in high vacuum pumps. Follow these general guidelines for adding or replacing vacuum pump oil:
- Consult Pump Manual: Always refer to your specific vacuum pump's instruction manual for the correct oil type, capacity, and procedure for adding or changing oil.
- Майдын деңгээлин текшерүү: Before each use, check the oil level in your vacuum pump's sight glass. The oil level should typically be between the 'MIN' and 'MAX' indicators.
- Май кошуу: If the oil level is low, carefully pour the Robinair 13119 oil into the pump's oil fill port until the correct level is reached. Avoid overfilling.
- Май алмаштыруу: For a complete oil change, drain the old oil completely from the pump before refilling with fresh Robinair 13119 oil. Dispose of used oil responsibly according to local regulations.
Using high-quality vacuum pump oil like Robinair 13119 is essential for achieving and maintaining deep vacuum levels, protecting pump components, and extending the pump's operational life.
4. Техникалык тейлөө
Regular maintenance, particularly timely oil changes, is critical for the performance and longevity of your vacuum pump. The frequency of oil changes depends on the pump's usage and operating conditions.
- Үзгүлтүксүз текшерүү: Periodically inspect the oil in your vacuum pump. If the oil appears cloudy, discolored, or contains particulate matter, it indicates contamination and should be changed immediately.
- Moisture Contamination: Moisture is a primary contaminant for vacuum pump oil. Robinair 13119 oil is designed with low moisture content, but exposure to humid environments or processing wet materials can introduce moisture. Change oil promptly if moisture contamination is suspected.
- Термикалык туруктуулук: This oil is engineered for thermal stability, resisting breakdown due to heat. However, prolonged operation at high temperatures will eventually degrade the oil, necessitating replacement.
Adhering to a consistent oil change schedule, as recommended by your pump manufacturer, and using quality oil like Robinair 13119 will maximize your vacuum pump's life and efficiency.
5. Кыйынчылыктарды
If your vacuum pump is not performing optimally, consider the following common issues related to vacuum pump oil:
- Poor Vacuum Performance: If the pump struggles to achieve or maintain a deep vacuum, the oil may be contaminated with moisture or other substances, or the oil level might be too low. Check the oil level and condition; replace if necessary.
- Ашыкча ызы-чуу же титирөө: While not always oil-related, insufficient or degraded oil can contribute to increased friction and wear, leading to noise. Ensure the oil level is correct and the oil is clean.
- Мунай агып кетиши: If oil is leaking from the pump, check seals and connections. Ensure the oil fill cap is securely tightened.
Always consult your vacuum pump's manual for specific troubleshooting steps. If issues persist after addressing oil-related factors, professional service may be required.
6. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Робинэйр |
| Модель номери | 13119 |
| Продукт түрү | Premium High Vacuum Pump Oil |
| Пакет маалыматы | Бөтөлкө |
| Суюктуктун көлөмү | 473 Milliliters (1 Pint / 16.0 Fluid Ounces) |
| Элемент Салмагы | 0.83 фунт (болжол менен 13.3 унция) |
| Сунушталган Колдонуулар | Automotive Maintenance or Repair, for all high vacuum pumps |
| Негизги өзгөчөлүктөрү | Quality tested for minimal moisture content, excellent cold temperature properties, chemically engineered to maintain viscosity at higher running temperatures, maximizes vacuum pump life. |
| UPC | 637335000582 |
7. Кепилдик жана колдоо
For specific warranty information regarding your Robinair 13119 Premium High Vacuum Pump Oil, please refer to the product packaging or contact Robinair customer service directly. Robinair is committed to providing high-quality products and support.
If you have any questions, require technical assistance, or need to report an issue, please visit the official Robinair webсайтына кириңиз же алардын кардарларды тейлөө кызматына кайрылыңыз. Ошондой эле, көбүрөөк маалыматты жана өнүмдөрдү бул жерден таба аласыз Robinair Store on Amazon.
