Introduction
The Fluke 805 Vibration Meter is a precision instrument designed to simplify vibration screening and provide reliable measurements for critical maintenance decisions. Unlike a simple vibration pen, this meter offers comprehensive data to assess machine health.
Key capabilities include overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement, as well as Crest Factor+ for reliable bearing assessment (4,000 Hz to 20,000 Hz). It features a colored lighting system for pressure indication, an infrared temperature sensor, on-board memory for up to 3500 measurements, audio output for bearing tones, and external accelerometer support for hard-to-reach areas.
Сүрөт 1: Алдыңкы view of the Fluke 805 Vibration Meter, displaying measurement data and control buttons.
Жайгашуу
Батарея орнотуу
The Fluke 805 Vibration Meter operates on two AA lithium iron disulfide batteries, which are included with the device. To install or replace batteries:
- Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
- Open the cover and insert two AA batteries, ensuring correct polarity (+/-).
- Батарея уясынын капкагын бекем жабыңыз.
A full set of batteries provides approximately 250 measurements.
Баштапкы күйгүзүү
Press the power button (labeled with a circle and vertical line) to turn on the device. The high-resolution screen will illuminate, displaying the main measurement interface.
Operating the Fluke 805 Vibration Meter
Өлчөөлөрдү алуу
The Fluke 805 simplifies vibration analysis with its intuitive operation. Follow these steps to take a measurement:
- Түзмөк күйгүзүлгөнүн текшериңиз.
- Select the desired measurement mode (e.g., Overall Vibration, CF+) using the navigation buttons.
- Place the sensor tip firmly against the equipment surface at the desired measurement point.
- басыңыз ӨЛЧӨ button. The colored lighting system (green for sufficient pressure, red for insufficient pressure) will guide you to apply the correct contact force.
- Hold steady until the measurement is complete and the results are displayed on the screen.
The meter provides overall vibration measurements (10 Hz to 1,000 Hz) in acceleration, velocity, and displacement units. For bearing assessment, the Crest Factor+ function measures between 4,000 Hz and 20,000 Hz.
Жыйынтыктарды интерпретациялоо
The Fluke 805 provides a four-level severity scale to indicate the condition of overall vibration and bearing health. This allows for quick assessment of equipment status (e.g., Good, Needs Attention).
The integrated infrared temperature sensor also provides temperature readings, enhancing diagnostic capabilities.
Маалыматтарды башкаруу
The device has on-board memory capable of holding up to 3500 measurements. Data can be exported via USB for further analysis and trending in Microsoft Excel using built-in templates.
For hard-to-reach locations, an external accelerometer can be connected. The built-in flashlight assists in viewing measurement locations in dark environments.
Demonstration Video: A Day in the life of a Fluke 805 Vibration Meter
This video demonstrates the practical application of the Fluke 805 Vibration Meter in various industrial settings, showcasing its ease of use and the immediate feedback it provides for maintenance professionals.
Informational Video: What Are The Differences Between The Fluke 805 And 810
Бул видеодо салыштыруу барview of the Fluke 805 and Fluke 810 vibration meters, highlighting their respective features and ideal applications to help users understand the differences.
Техникалык тейлөө
Тазалоо жана сактоо
To ensure the longevity and accuracy of your Fluke 805 Vibration Meter, follow these maintenance guidelines:
- Жарнак менен түзмөктү тазалаңызamp кездеме жана жумшак жуугуч. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Ensure the sensor tip is clean and free of debris before and after each use.
- Store the meter in a dry, cool environment, away from direct sunlight and extreme temperatures.
Батареяны алмаштыруу
When the battery indicator shows low power, replace both AA batteries promptly to maintain optimal performance. Refer to the "Battery Installation" section under Setup for detailed instructions.
Проблемаларды чечүү
If you encounter issues with your Fluke 805 Vibration Meter, consider the following common troubleshooting steps:
- Кубат жок/Түзмөк күйбөй жатат: Батареянын орнотулганын текшерип, батареялардын жаңы экенин текшериңиз. Зарыл болсо, алмаштырыңыз.
- Туура эмес окуулар: Ensure the sensor tip is clean and making firm, consistent contact with the measurement surface. Verify that the correct measurement mode is selected.
- Дисплей маселелери: If the screen is unresponsive or shows errors, try removing and reinserting the batteries to perform a soft reset.
- Маалыматтарды өткөрүү көйгөйлөрү: Ensure the USB cable is securely connected to both the meter and the computer. Verify that the necessary software or drivers are installed on your computer.
For persistent issues not resolved by these steps, please contact Fluke customer support.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Бренд | Fluke |
| Модель номери | FLUKE-805 |
| Өлчөө түрү | Вибрация өлчөгүч |
| Low Frequency Range (Overall) | 10 - 1,000 Гц |
| High Frequency Range (CF+) | 4,000 - 20,000 Гц |
| Vibration Limit | 50 g peak (100 g peak-peak) |
| A/D конвертер | 16-бит |
| Сигнал ызы-чуу катышы | 80 дБ |
| Sampling Rate (Low Frequency) | 20,000 Гц |
| Sampling Rate (High Frequency) | 80,000 Гц |
| Power Source | Battery Powered (2 AA Lithium Iron Disulfide) |
| Батареянын иштөө мөөнөтү | 250 өлчөө |
| Борттогу эс тутум | 3500 өлчөө чейин |
| Өлчөмдөрү (L x W x Y) | 9.49 x 2.8 x 2.28 дюйм |
| Элемент Салмагы | 2.54 фунт (1.16 килограмм) |
| Түс | Сары |
| Мин. Operating Voltage | 3 вольт |
| Жогорку температура рейтинги | 392 градус Фаренгейт |
Кепилдик жана колдоо
For detailed warranty information, please refer to the official documentation provided with your Fluke 805 Vibration Meter or visit the official Fluke webсайт. Кепилдиктин шарттары жана шарттары аймакка жараша өзгөрүшү мүмкүн.
For technical support, service, or inquiries, please contact Fluke customer service through their official channels. Contact information can typically be found on the Fluke webсайтында же продуктунун таңгагында.
