Продукт бүттүview
The Intermatic WP1000HC is a 1-gang, horizontal mount, non-metallic weatherproof cover designed for use with electrical outlets. This "while-in-use" cover provides protection for electrical connections even when a cord is plugged into the outlet, making it ideal for outdoor or damp locations. It is constructed from durable polycarbonate material and features a clear design, allowing for easy visual inspection of the outlet. The cover includes multiple insert types to accommodate various receptacle configurations, including duplex, Decora/GFCI, and combination toggle switch or single receptacles.
Key features include a 2-1/4 inch depth, a 0.5 inch cord diameter capacity, and a 0.78 inch exit port length. It also offers a padlockable option for added security.
Орнотуу жана орнотуу
Before beginning installation, ensure power to the outlet is turned off at the circuit breaker to prevent electrical shock. This cover is designed for horizontal mounting over a single-gang electrical box.
- Prepare the Outlet Box: Ensure the existing electrical box is securely mounted and free from debris.
- Select the Correct Insert: The WP1000HC comes with three separate insert types:
- Дуплекстүү кабылдама
- Decora/GFCI Receptacle
- Combination Toggle Switch or Single Receptacle (with diameters of 1.375", 1.625", or 1.75")
- Арткы плитаны орнотуу: Align the back plate of the weatherproof cover with the screw holes on your electrical box. Use the provided screws (or appropriate screws for your box) to securely fasten the back plate to the electrical box. Ensure it is flush and stable.
- Капкакты тиркөө: Hinge the clear cover onto the back plate. Ensure the hinge pins are properly seated.
- Капкакты бекитиңиз: Close the clear cover. It should snap securely into place. If using the padlockable option, insert a padlock (not included) through the designated holes for added security.
- Күчтү калыбына келтирүү: Once the cover is fully installed and secured, you may restore power to the circuit breaker.
1-сүрөт: Ар түрдүү views of the Intermatic WP1000HC Weatherproof While-In-Use Cover, illustrating its design and components. The image shows the clear front cover, the back plate with an insert, and a side profile.
Иштөө нускамалары
The Intermatic WP1000HC cover is designed for simple operation.
- To Use the Outlet: Open the clear cover by unlatching it. Plug your electrical cord into the receptacle. The cover is designed to close over the cord while it is plugged in, providing continuous weather protection.
- Капкагын жабуу үчүн: Ensure the electrical cord (if present) is routed through the designated exit port at the bottom of the cover. Close the clear cover firmly until it latches securely. This ensures a weatherproof seal.
- Padlock Option: If desired, a padlock can be inserted through the holes on the cover to prevent unauthorized access or tampring.
Техникалык тейлөө
The Intermatic WP1000HC requires minimal maintenance to ensure its longevity and effectiveness.
- Тазалоо: Капкагын мезгил-мезгили менен жарнама менен сүртүп туруңузamp cloth to remove dirt, dust, or debris. Avoid using abrasive cleaners or solvents, as these may damage the polycarbonate material.
- Текшерүү: Regularly inspect the cover for any signs of damage, cracks, or wear, especially around the hinges and latch. Ensure the seal remains intact. If any damage is observed, replace the cover to maintain weatherproof integrity.
- Мөөрдүн бүтүндүгү: Ensure the cover closes tightly and the seal around the edges is not compromised by debris or damage. A proper seal is crucial for weatherproof performance.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Капкак коопсуз жабылбайт. | Obstruction, incorrect insert, or damaged latch/hinge. | Check for debris around the latch or hinges. Ensure the correct insert is used and properly seated. Inspect for physical damage; replace if necessary. |
| Капкактын ичиндеги суу. | Improper installation, damaged seal, or open cover. | Verify the cover is fully closed and latched. Inspect the seal for cracks or gaps. Re-install if necessary, ensuring a tight fit against the wall. |
| Difficulty plugging in cords. | Cord diameter exceeds capacity or improper alignment. | Ensure cord diameter is within the 0.5" limit. Verify the cord is routed correctly through the exit port. |
Техникалык шарттар
- Модел: WP1000HC
- Бөлүмдүн номери: 078275028081
- Түрү: Weatherproof While-In-Use Cover
- Gang: 1-Бандасы
- Монтаждоо: Горизонталдуу
- Материал: Polycarbonate, Non-Metallic
- Түсү: Таза
- Продукт тереңдиги: 2-1/4 дюйм
- Cord Diameter Capacity: 0.5 дюйм
- Exit Port Length: 0.78 дюйм
- Included Inserts: Duplex Receptacle, Decora/GFCI Receptacle, Combination Toggle Switch or Single Receptacle (1.375", 1.625", 1.75" diameters)
- Өзгөчөлүктөрү: Padlockable Option
- Орнотуу түрү: Screw-In
- Элемент Салмагы: 0.01 унция
- Пакеттин өлчөмдөрү: 2 x 2 x 2 дюйм
Кепилдик жана колдоо
Кепилдик боюнча толук маалымат жана техникалык колдоо алуу үчүн расмий Intermaticга кайрылыңыз website or contact Intermatic customer service directly. Keep your purchase receipt for warranty claims.
Интерматикалык расмий Webсайт: www.intermatic.com
