Lux Pro P521U Программалануучу 5-2 күндүк Термостат Колдонуучунун колдонмосу

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro P521U Programmable 5-2 Day Thermostat. The P521U is designed to offer precise temperature control for your home, featuring programmable settings for weekdays and weekends, and compatibility with various heating and cooling systems. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Пакеттин мазмуну

Орнотууну баштоодон мурун, пакетте бардык компоненттер бар экенин текшериңиз:

• LUX Pro P521U Thermostat Unit
• 2 AA LR6 батарейкасы
• 2 ST буроолор
• 2 Дубал анкерлери
• Instruction Manuals (this document)

Image: Contents of the LUX Pro P521U package.

Орнотуу жана орнотуу

Proper installation is crucial for the thermostat's functionality. If you are unsure about any steps, it is recommended to consult a qualified HVAC technician.

Системанын шайкештиги

Image: System Compatibility Chart.

The P521U thermostat is compatible with a variety of 24V heating and cooling systems. Please review the compatibility chart to ensure your system is supported.

• HEAT (24V) Compatible: Gas/Oil/Electric Furnace (Heating only, Multistagд, Бойдок Сtage), Heat Pump (with/without Auxiliary Heat), 2-wire Hydronic (Hot Water), 3-wire Hydronic (Hot Water), 750 Millivolt, Gas Fireplaces (24V).
• COOL (24V) Compatible: Cooling only, Single stagэ муздатуу.
• Шайкеш келбейт: Жылуулук насосунун көп функциялуу жабдууларыtage, Cool Multistage, Radiant Ceiling Heat, Electric Baseboards, Portable space heaters, Plug-in air conditioners.

Wiring Instructions

Before wiring, ensure the power to your HVAC system is turned off at the circuit breaker to prevent electrical shock.

1. Эски термостатты алып салуу: Carefully detach your old thermostat from the wall. Note the wire connections to each terminal. It is recommended to label each wire with the corresponding terminal letter before disconnecting.
2. Жаңы термостатты орнотуу: Position the new thermostat base plate on the wall. Use the provided screws and wall anchors to secure it.
3. Зымдарды туташтыруу: Refer to the appropriate wiring diagram below for your specific HVAC system. Connect the labeled wires to the corresponding terminals on the P521U thermostat. The factory RH-RC jumper wire is typically installed for most systems.

Wiring Diagram #1: 1-Stage же 2-Stage, Heating Only (Including Millivolt)

This diagram illustrates wiring for heating-only systems. Note the RH-RC jumper wire and optional C wire for continuous power.

Wiring Diagram #2: Hot Water Heating Only (With a 3-Wire Zone Valve)

This diagram details wiring for hot water heating systems utilizing a 3-wire zone valve. Pay attention to the A terminal connection for valve control.

Wiring Diagram #3: 1-Stage, Муздатуу гана

This diagram shows wiring for cooling-only systems. Ensure the G and Y terminals are correctly connected for fan and compressor operation.

Батарея орнотуу

The P521U thermostat is battery-powered (2 AA batteries included).

1. Open the battery compartment located on the side or back of the thermostat.
2. Туура полярдуулукту (+/-) камсыз кылып, эки жаңы AA щелочтуу батарейканы салыңыз.
3. Батарея отсегин бекем жабыңыз.

Эскертүү: Rechargeable batteries are not recommended as they may cause inaccurate battery level readings or premature power loss.

Иштөө нускамалары

The P521U thermostat features a clear digital display and intuitive controls for managing your home's temperature.

Thermostat Controls Overview

Image: P521U Control Panel Diagram.

• LCD дисплей экраны: Shows current temperature, time, day, and system status. Features a backlight for visibility.
• Fan Mode Switch (FAN): Controls fan operation (AUTO/ON).
• System Mode Switch (TEMPERATURE): Selects system mode (HEAT/OFF/COOL).
• ЖОГОРУ/ТӨМӨН баскычтары: Adjust temperature settings and navigate programming menus.
• HOLD баскычы: Maintains the current temperature indefinitely, overriding the program schedule.
• Set Slide Switch (SET): Used for setting Day/Time, Temperature Program, and Air Filter reminders.
• EMER Button: Accesses certain setup functions (functionality may vary based on system type).
• КИЙИНКИ баскычы: Advances through programming steps and menu options.

Учурдагы күндү жана убакытты орнотуу

1. жылдырыңыз SET өтүү КҮН/Убакыт.
2. колдонуу ЖОГОРУ/ТӨМӨН убакытты тууралоо үчүн баскычтар.
3. Басыңыз КИЙИНКИ to advance to the day setting.
4. колдонуу ЖОГОРУ/ТӨМӨН учурдагы күндү тандоо үчүн баскычтар.
5. жылдырыңыз SET кайра которулуу RUN сактоо жана чыгуу.

Programming the Schedule (5-2 Day)

The P521U allows for separate programming for weekdays (5 days) and weekends (2 days), with 2 or 4 periods per day.

1. жылдырыңыз SET өтүү TEMP PROG.
2. The display will show the first programming period (e.g., "MORN" for weekdays).
3. колдонуу ЖОГОРУ/ТӨМӨН баскычтары ушул мезгилге керектүү температураны коюу.
4. Басыңыз КИЙИНКИ to set the start time for this period using the ЖОГОРУ/ТӨМӨН баскычтар.
5. Repeat steps 3 and 4 for all desired periods (MORN, DAY, EVE, NIGHT) for weekdays.
6. After programming all weekday periods, the thermostat will automatically advance to the weekend programming. Repeat the process for Saturday and Sunday.
7. Once all programming is complete, slide the SET кайра которулуу RUN.

Кеңеш: The thermostat may include a "COPY" feature to duplicate a day's program to another day, simplifying the programming process. Consult the full online manual for details on this feature.

Manual Temperature Hold

To temporarily override the program schedule and maintain a specific temperature:

1. жардамы менен температураны тууралаңыз ЖОГОРУ/ТӨМӨН buttons to your desired setting.
2. басыңыз БЕРҮҮ button. The display will show "HOLD" to indicate the program is suspended.
3. To cancel the hold, press the БЕРҮҮ button again or slide the SET өтүү RUN. The thermostat will resume its programmed schedule.

Техникалык тейлөө

Батареяны алмаштыруу

The thermostat will display a low battery indicator when the AA batteries need replacement. Replace batteries promptly to ensure continuous operation.

1. Батарея отсегин ачыңыз.
2. Эски батарейкаларды алып салыңыз.
3. Туура полярдуулукту сактап, эки жаңы AA щелочтуу батарейканы салыңыз.
4. Батарея отсегин жабыңыз.

Маанилүү: The thermostat features battery-free memory storage, so your programmed settings will be retained during battery replacement.

Аба чыпкасы Монитор

The P521U includes a programmable air filter life timer. When the filter needs changing, an indicator will appear on the display. Refer to the full online manual for instructions on setting and resetting this reminder. Regular filter changes improve system efficiency and air quality.

Проблемаларды чечүү

If you encounter issues with your P521U thermostat, review the common problems and solutions below. For more detailed troubleshooting, refer to the complete online manual available on the LUX webсайт.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, technical support, or to access the complete digital instruction manual, please visit the official LUX website or contact LUX customer service.

Көбүрөөк маалымат жана колдоо булактарын бул жерден таба аласыз LUX Brand Store on Amazon.