1. Киришүү
The ATEQ VT15 is a specialized tool designed for activating and resetting Tire Pressure Monitoring System (TPMS) sensors in vehicles. This device simplifies the process of tire rotation and sensor replacement by allowing the vehicle's onboard computer to recognize new or repositioned TPMS sensors. It is an essential tool for automotive workshops and garages, providing an efficient way to manage TPMS systems.
The ATEQ VT15 is a compact, handheld device used for activating and resetting TPMS sensors. It features a simple two-button interface and indicator lights for operation.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян келтирүүчү химиялык заттарды камтышы мүмкүн. Көбүрөөк маалымат алуу үчүн, киргиле www.P65Warnings.ca.gov.
Always adhere to the following safety guidelines when using the ATEQ VT15:
- Аппаратты иштетүүдөн мурун бардык нускамаларды окуп, түшүнүңүз.
- Use only the specified 9-volt battery. Ensure correct polarity during installation.
- Түзмөктү өтө жогорку температурага, нымдуулукка же түз күн нуруна дуушар кылбаңыз.
- Аппаратты балдардан алыс кармаңыз.
- Аппаратты ажыратууга же өзгөртүүгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
- Эгерде түзмөк көпкө чейин колдонулбаса, агып кетүүнүн алдын алуу үчүн батарейканы чыгарып коюңуз.
3. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- ATEQ VT15 TPM Sensor Activation Tool
- 9-volt battery (may be included or sold separately)
- USB Cable (for updates)
- Колдонуучунун Колдонмосу (бул документ)
4. Орнотуу
4.1 Батареяны орнотуу
- Locate the battery compartment cover on the back of the VT15 tool.
- Бөлүктү ачуу үчүн капкакты жылдырыңыз же ачыңыз.
- Insert a new 9-volt battery, ensuring that the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Батарея уясынын капкагын бекем жабыңыз.
4.2 Микропрограмма жаңыртуулары
To ensure optimal performance and compatibility with the latest TPMS sensors, it is recommended to regularly update the VT15's firmware and drivers.
- Connect the VT15 tool to your computer using the provided USB cable.
- Visit the official ATEQ webсайт (www.ateq-tpms.com) to download the latest software and drivers for the VT15.
- Жаңыртууларды орнотуу үчүн экрандагы нускамаларды аткарыңыз.
5. Иштөө нускамалары
5.1 Жалпы операция
The ATEQ VT15 is designed for straightforward operation. It typically features two buttons: one for power/activation (often labeled 'TX' for transmit) and another for power off or mode selection. The tool activates TPMS sensors by sending a low-frequency signal.
5.2 Vehicle Specific Procedures
Before activating TPMS sensors with the VT15, your vehicle's TPMS system must be put into 'learn mode'. The procedure for entering learn mode varies by vehicle make and model. Always consult your vehicle's owner's manual for precise instructions. Common methods include:
- Ignition key cycles.
- Pressing the brake pedal multiple times.
- Using dashboard controls or steering wheel buttons to navigate to a TPMS relearn menu.
- For some vehicles (e.g., certain Chevrolet models), a horn chirp will confirm entry into learn mode.
5.3 TPMS сенсорлорун иштетүү
Once your vehicle is in TPMS learn mode, follow these steps to activate each sensor:
- Ensure the VT15 tool is powered on by tapping its power button. An indicator light (e.g., 'TX' light) may illuminate.
- Starting with the first tire in your vehicle's specified relearn sequence (e.g., Left Front), position the VT15 tool's antenna near the tire sidewall, close to the valve stem.
- Press and hold (or tap, depending on the specific model's behavior) the activation button on the VT15.
- Listen for a horn chirp from your vehicle or observe the vehicle's turn signals flash, indicating successful sensor activation and recognition.
- Once confirmed, move to the next tire in the sequence (e.g., Right Front, Right Rear, Left Rear) and repeat steps 3-4.
- After all four sensors have been successfully activated, your vehicle's TPMS system should exit learn mode, often confirmed by two horn chirps.
5.4 Resetting TPMS Light
The ATEQ VT15 facilitates the activation of TPMS sensors, allowing your vehicle's computer to learn their unique IDs. After all sensors are successfully activated and recognized by the vehicle, the TPMS warning light on your dashboard should reset automatically. If the light persists, ensure all steps were followed correctly and consider driving the vehicle for a short period (e.g., 10-15 minutes at speeds above 20 mph) to allow the system to complete its learning process. If the light remains on, refer to the Troubleshooting section or consult a professional.
6. Техникалык тейлөө
- Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сактагыч: Store the VT15 in a cool, dry place, away from direct sunlight and extreme temperatures.
- Батарея: Remove the 9-volt battery if the tool will not be used for an extended period (e.g., several months) to prevent potential battery leakage and damage to the device.
- Микропрограмма: Periodically check the official ATEQ website for new firmware updates to ensure continued compatibility and optimal performance.
7. Кыйынчылыктарды
| Маселе | Мүмкүн болгон себеп / Чечим |
|---|---|
| Курал күйбөйт. | Check the 9-volt battery. Ensure it is inserted correctly with proper polarity and has sufficient charge. Replace if necessary. |
| Sensor does not activate. |
|
| TPMS light remains on after activation. |
|
| Tool not compatible with certain vehicle models or aftermarket sensors. | While the VT15 is broadly compatible, some specific vehicle models or non-OEM sensors may require different tools or specific procedures. Verify compatibility with ATEQ's official resources. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | ATEQ |
| Модел | ATEQ VT15 |
| Элементтин өлчөмдөрү (L x W x Y) | 7 x 4.9 x 2.8 дюйм |
| Элемент Салмагы | 0.45 килограмм (15.8 унция) |
| Maximum Supply Voltage | 9 вольт (ток) |
| Продукт үчүн атайын колдонуу | Automotive workshops, garages |
| UPC | 849982015103 |
9. Кепилдик жана колдоо
For specific warranty terms and conditions, please refer to the documentation included with your ATEQ VT15 tool or visit the official ATEQ website. Warranty coverage typically addresses manufacturing defects and material flaws.
For technical assistance, product inquiries, or warranty claims, please contact ATEQ customer support or visit their official brand store:
