Brodit ProClip 854788 Angled Mount User Manual

1. Киришүү

This manual provides detailed instructions for the installation and use of the Brodit ProClip 854788 Angled Mount. This custom-made, vehicle-specific mount is designed to provide a secure and stable platform for your device holder in Freightliner Class M2 – 12 vehicles. The ProClip is engineered for easy, non-invasive installation, clipping tightly into dashboard seams without requiring drilling or dismantling of vehicle components.

2. Пакеттин мазмуну

Сураныч, орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 1x Brodit ProClip 854788 Angled Mount
• Орнотуу нускамалары

Эскертүү: A device holder is NOT included and must be purchased separately. The ProClip features a pre-drilled hole pattern for easy attachment of a compatible device holder.

1-сүрөт: The Brodit ProClip 854788 Angled Mount. This image shows the black plastic mount with a yellow stripe on one side and a label indicating "Item no. 854788 Brodit". This is the main component included in the package.

3. Орнотуу жана орнотуу

The Brodit ProClip is designed for quick and secure installation without damaging your vehicle's interior. Follow these steps carefully:

1. Бетти даярдоо: Clean the area of the dashboard where the ProClip will be installed to ensure a secure grip.
2. Орнотуу жерин аныктоо: The ProClip 854788 is designed for the angled section of the dashboard to the right of the steering wheel in Freightliner Class M2 – 12 vehicles. Refer to Figure 2 for the exact placement.
3. Position the ProClip: Locate the upper edge of the ProClip (marked '1' in Figure 2). Insert this edge into the seam between the dashboard and the pillar on the right side.
4. Secure the Lower Edge: Gently press the lower part of the ProClip (marked '2' in Figure 2) into the gap between the dashboard and the center console/panel. Apply firm, even pressure until the ProClip snaps securely into place.
5. Туруктуулукту текшерүү: Once installed, gently tug on the ProClip to ensure it is firmly seated and does not wobble.

2-сүрөт: Installation diagram showing the placement of the Brodit ProClip 854788 in a Freightliner Class M2 – 12 dashboard. Point '1' indicates where the upper edge of the ProClip should be inserted into the dashboard seam. Point '2' indicates where the lower edge should be pressed into the dashboard gap, securing the mount to the right of the steering wheel and instrument panel.

Маанилүү: No drilling or special tools are required for installation. Ensure the ProClip is correctly aligned with the dashboard seams for optimal stability.

4. Иштөө жана колдонуу

Once the ProClip is securely installed, you can attach your compatible device holder. The ProClip features a pre-drilled hole pattern, allowing for easy and secure attachment of most Brodit device holders. Position your device holder to ensure it does not obstruct your view, interfere with airbags, or impede access to vehicle controls.

• Attaching Device Holder: Align the screw holes of your device holder with the pre-drilled holes on the ProClip face plate and secure it using the provided screws from your device holder kit.
• Түзмөктүн жайгашуусу: Consider the size and orientation of your device. Ensure it is placed in a position that is easily accessible but does not compromise driving safety.

5. Техникалык тейлөө

The Brodit ProClip requires minimal maintenance. To keep it clean, simply wipe it with a soft, damp кездеме. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонуудан алыс болуңуз, анткени алар материалга зыян келтириши мүмкүн.

6. Кыйынчылыктарды

• Mount is not stable: Ensure the ProClip is fully inserted into both dashboard seams. Verify that the correct ProClip model (854788) is being used for your specific Freightliner Class M2 – 12 vehicle.
• Difficulty inserting: Do not force the ProClip. Re-check the alignment with the dashboard seams. A small, non-marring plastic tool can be used to gently widen the seam if necessary, but typically firm hand pressure is sufficient.
• Device holder does not fit: Ensure your device holder is compatible with Brodit ProClips and uses a standard mounting pattern.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For information regarding warranty coverage or technical support, please refer to the official Brodit website or contact your authorized Brodit dealer. Keep your purchase receipt as proof of purchase.