SkyTech 3301P

SkyTech 3301P Programmable Fireplace Remote Control User Manual

Model: SKY-3301P

1. Киришүү

The SkyTech 3301P remote control system is designed to provide a safe, reliable, and user-friendly remote control solution for gas heating appliances. This system allows for both thermostatic and manual operation from the transmitter. It can be easily programmed to custom settings and operates on radio frequencies (RF) within a 20-foot range using non-directional signals. The system utilizes one of 1,048,576 security codes, pre-programmed at the factory, which must be matched between the transmitter and receiver prior to initial use.

2. Коопсуздук маалыматы

Please read and understand all instructions before installing or operating this remote control system. Failure to follow these instructions may result in property damage, personal injury, or death. This system is intended for use with gas heating appliances only. Ensure all wiring is performed by a qualified professional if you are unsure. Always turn off the gas supply to the appliance before performing any installation or maintenance.

  • Пультту же кабыл алгычты сууга же ашыкча нымдуулукка дуушар кылбаңыз.
  • Батареяларды балдар жетпеген жерде сактаңыз.
  • Бардык батарейкаларды бир убакта алмаштырыңыз; эски жана жаңы батареяларды аралаштырбаңыз.
  • Колдонулган батарейкаларды жергиликтүү эрежелерге ылайык таштаңыз.
  • Ensure the fireplace appliance is in good working order before using the remote control system.

3. Package Contents and Components Overview

3.1 Пакеттин мазмуну

  • Өткөргүч (алыстан башкаруу)
  • Алуучу
  • Wall Holder
  • Дубал плитасы
  • Орнотуу нускамалары
  • Batteries (4 AA batteries included)

3.2 Компоненттер бүттүview

The SkyTech 3301P system consists of a handheld transmitter and a receiver unit.

Өткөргүч (алыстан башкаруу)

  • Баскычтар: Features 8 buttons including Up/Mode/Down, Timer/Set/Prog/Ahead/Back, located below a flip cover.
  • LCD дисплей: Shows room temperature, thermostat set temperature, a 24-hour clock, and a 9-hour countdown timer.

Кабыл алуучу бирдиги

The receiver unit is battery-powered and includes a learn function button and an On/Remote/Off slider switch.

SkyTech 3301P Receiver Unit with On/Remote/Off switch and Learn button
Image 1: SkyTech 3301P Receiver Unit. This image shows the white faceplate of the receiver unit with a toggle switch for ON, REMOTE, and OFF modes, along with a 'LEARN' button and 'ADJ' adjustment point. Wires with spade connectors are visible extending from the back of the unit.

4. Орнотуу жана орнотуу

4.1 Батареяны орнотуу

Install the required batteries into both the transmitter and receiver units. Ensure correct polarity.

  • Өткөргүч: Refer to the transmitter's battery compartment for specific battery type and orientation.
  • Алуучу: Open the battery compartment on the receiver unit and insert the batteries as indicated.

4.2 Receiver Placement and Wiring

The receiver can be installed in a wall, on the hearth, or under the fireplace behind the control access panel. Ensure the location allows for proper signal reception and is protected from excessive heat or moisture.

  1. Turn off the gas supply to the fireplace appliance.
  2. Access the control panel of your fireplace.
  3. Connect the wires from the receiver to the appropriate terminals on your fireplace's gas valve or control module. Typically, these are the TH (Thermostat) and TH/TP (Thermopile) terminals. Consult your fireplace appliance manual for specific wiring diagrams.
  4. Secure the receiver in its chosen location.

4.3 Pairing the Transmitter and Receiver (Learning Function)

The transmitter and receiver are factory-paired, but if pairing is lost or a new component is introduced, follow these steps:

  1. Ensure the receiver's slider switch is in the АЛЫСКЫ позиция.
  2. басып, кармап туруңуз ҮЙРӨНҮҮ button on the receiver unit (refer to Image 1 for location) until you hear a beep or see an indicator light flash.
  3. Within 10 seconds, press any button on the transmitter.
  4. The receiver will emit a series of beeps or flashes to confirm successful pairing.

5. Операция

The SkyTech 3301P offers both manual and thermostatic control modes.

5.1 Receiver Slider Switch Modes

  • КҮЙҮК: The fireplace will remain continuously on, bypassing remote control.
  • АЛЫС: The fireplace is controlled by the transmitter.
  • ӨЧҮК: The fireplace will remain continuously off, bypassing remote control.

5.2 Өткөргүчтүн функциялары

Open the flip cover on the transmitter to access all control buttons.

  • РЕЖИМ: Toggles between manual ON/OFF, thermostatic mode, and timer mode.
  • ӨЙДӨ/ТӨМӨН жебелери: Adjust temperature settings, time, or program values.
  • ТАЙМЕР: Activates the 9-hour countdown timer.
  • ЖӨНДӨӨ: Used to confirm settings during programming.
  • ПРОГ: Accesses programming functions for daily schedules.
  • AHEAD/BACK: Navigates through programming periods.

5.3 Setting the Clock and Temperature

  1. басыңыз SET убакыт орнотуу режимине өтүү үчүн баскыч.
  2. колдонуу ЖОГОРУ/ТӨМӨН arrows to adjust the hour and minute.
  3. Басыңыз SET ар бир жөндөөнү ырастоо үчүн кайрадан басыңыз.
  4. To set the desired temperature in thermostatic mode, press the РЕЖИМ button until the thermostat icon appears.
  5. колдонуу ЖОГОРУ/ТӨМӨН каалаган бөлмө температурасын орнотуу үчүн жебелер.

5.4 Programming the Thermostat

The 3301P allows for programmable heat periods. Refer to the detailed instructions in the included manual for specific programming steps for each day of the week.

6. Техникалык тейлөө

6.1 Батареяны алмаштыруу

When the battery indicator on the transmitter's LCD display shows low power, or if the remote's range decreases, replace the batteries in both the transmitter and receiver. Always replace all batteries at the same time with new ones of the same type.

  • Өткөргүч: Typically uses AAA batteries.
  • Алуучу: Uses 4 AA batteries (included).

Эскертүү: If the batteries are removed for an extended period, you may need to re-pair the transmitter and receiver.

6.2 Тазалоо

Wipe the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.

7. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Fireplace does not turn ON/OFF with remote.
  • Receiver switch is not in REMOTE position.
  • Өткөргүчтө же кабыл алгычта батареялар аз.
  • Берүүчү жана кабыл алгыч жупташкан эмес.
  • Receiver is too far from the fireplace or obstructed.
  • Set receiver switch to REMOTE.
  • Replace all batteries in both units.
  • Perform the pairing (learning) procedure.
  • Ensure receiver is within 20 ft of the transmitter and has a clear path.
ЖК дисплей күңүрт же бош.Low batteries in the transmitter.Бергич батареяларын алмаштырыңыз.
Термостатикалык режимде камин күтүүсүздөн күйүп/өчүп калат.Incorrect temperature settings or programming.Review and adjust temperature settings and programming schedule.

8. Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номериSKY-3301P
Продукциянын өлчөмдөрү6.5 x 3.7 x 3 дюйм
Элемент Салмагы12 унция
Батареялар талап кылынат4 AA batteries (for receiver, included)
Өзгөчө өзгөчөлүкПрограммалануучу, Таймер
Колдоого алынган түзмөктөрдүн максималдуу саны1
Шайкеш түзмөктөрFireplace (Gas Heating Appliances)
Зымсыз диапазонUp to 20 feet (RF non-directional)

9. Кепилдик жана колдоо

For specific warranty information, please refer to the documentation included with your purchase or contact SkyTech customer support. Keep your proof of purchase for warranty claims.

If you encounter any issues not covered in this manual or require further assistance, please contact SkyTech customer service. Contact details are typically found on the product packaging or the manufacturer's official webсайт.

Тектеш документтер - 3301P

Preview Skytech үн чыгаруучу кабыл алгычтары: термокоопсуздукту жана байланыш коопсуздугун түшүнүү
Skytech алыстан башкаруу пультунун кабыл алгычтары эмне үчүн сигнал берерин билип алыңыз, термокоопсуздук жана байланышкоопсуздук функцияларына басым жасаңыз. Мүчүлүштүктөрдү оңдоо боюнча кеңештерди жана шайкеш келген моделдерди камтыйт.
Preview Skytech 3301P Программалануучу алыстан башкаруу системасы: Орнотуу жана иштетүү нускамалары
Skytech 3301P алыстан башкаруу системасын орнотуу, иштетүү жана программалоо боюнча комплекстүү колдонмо, орнотууларды, режимдерди, коопсуздук өзгөчөлүктөрүн, зымдарды жана кепилдик маалыматын камтыйт.
Preview Skytech 5301P Каминди алыстан башкаруу системасы: Орнотуу жана иштетүү боюнча колдонмо
Бул колдонмодо газ каминдери үчүн Skytech 5301P алыстан башкаруу тутумун орнотуу, иштетүү жана көйгөйлөрдү чечүү боюнча комплекстүү нускамалар камтылган. Өткөргүчтүн функциялары, ресиверди жөндөө, зымдар, термостат жана программа режимдери, коопсуздук функциялары жана кепилдик маалыматы жөнүндө билип алыңыз.
Preview Troubleshooting Guide for Sky-MRCK & Sky-MRCK-TH Remote Systems with UN3 RX
Troubleshoot your Sky-MRCK and Sky-MRCK-TH remote control systems for HI/LO servo motors using the UN3 RX. This guide provides step-by-step solutions for common issues like communication errors, battery problems, signal loss, and environmental factors.
Preview Skytech SKY-MRCK (SR1001-1) Wireless Remote Control System Installation and Operation Manual
Comprehensive installation and operating instructions for the Skytech SKY-MRCK (SR1001-1) single-function wireless remote control system, designed for operating hi/low servo motor gas valves in fireplaces.
Preview Skytech 5310 Газ Камининин алыстан башкаруу системасы: Орнотуу жана иштетүү боюнча нускамалар
Skytech 5310 алыстан башкаруу системасын орнотуу жана иштетүү боюнча комплекстүү колдонмо, орнотууларды, функцияларды, коопсуздук функцияларын, бузулууларды аныктоону жана кепилдикти камтыйт.