LogTag TREX-8-AMZ

TREX-8 Temperature Data Recorder User Manual

Model: TREX-8-AMZ

Бренд: LogTag

Продукт бүттүview

The LogTag TREX-8 is an advanced external probe temperature recorder designed for accurate and cost-effective electronic temperature monitoring. It integrates state-of-the-art technology with innovative design to provide a high-performance data logging system. This model comes equipped with an ST100S-15 External Probe, essential for precise temperature measurements. Please note that an LTI-HID Docking Station is required for operation and software download, which is available as a free download.

LogTag TREX-8 Temperature Data Recorder with remote probe

Image: The LogTag TREX-8 Temperature Data Recorder unit with the ST100S-15 remote probe connected.

Негизги өзгөчөлүктөрү

Пакеттин мазмуну

The TREX-8 Temperature Data Recorder package typically includes:

Note: The LTI-HID Docking Station is required for operation and software download, but is sold separately.

Жайгашуу

1. Программалык камсыздоону орнотуу

Before using the TREX-8, download and install the LogTag Analyzer software from the official LogTag website. This software is essential for configuring the recorder, downloading data, and viewing temperature logs.

2. Док станциясын туташтыруу

Connect the LTI-HID Docking Station (sold separately) to your computer's USB port. Ensure the necessary drivers are installed, which are typically included with the LogTag Анализатор программасы.

LogTag TREX-8 inserted into LTI-HID Docking Station

Image: The LogTag TREX-8 temperature recorder unit inserted into the LTI-HID docking station, ready for connection to a computer.

3. Connecting the Remote Probe

Carefully insert the connector of the ST100S-15 remote probe into the designated port on the TREX-8 data recorder. Ensure a secure connection.

LogTag TREX-8 with remote probe connected

Image: The LogTag TREX-8 temperature recorder with the ST100S-15 remote probe securely connected to its input port.

ST100S-15 1.5M Remote Probe

Image: The ST100S-15 1.5-meter remote temperature probe, coiled, showing its connector and sensor tip.

Иштөө нускамалары

1. Configuring the Recorder

Place the TREX-8 into the LTI-HID Docking Station. Open the LogTag Analyzer software. The software will detect the connected recorder. Use the software to configure logging parameters such as start delay, logging interval, alarm thresholds, and recording duration.

2. Starting a Recording Session

Once configured via the software, remove the TREX-8 from the docking station. To initiate recording, press and hold the "Start/Mark" button on the device until the "OK" indicator light flashes. The device will begin logging data according to the programmed settings.

3. Monitoring Status Indicators

LogTag TREX-8 showing Alert and OK indicators

Image: Close-up of the LogTag TREX-8 showing the "ALERT" (red) and "OK" (green) indicator lights, along with the "Start/Mark" button.

4. Downloading Data

To download recorded data, re-insert the TREX-8 into the LTI-HID Docking Station while it is connected to your computer. Open the LogTag Analyzer software. The software will automatically detect the recorder and prompt you to download the data. Once downloaded, you can view, analyze, and export the temperature logs.

Техникалык тейлөө

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Device not detected by software.Docking station not connected or drivers not installed.Ensure LTI-HID Docking Station is securely connected to USB. Reinstall LogTag Analyzer software to ensure drivers are present.
"ALERT" light is on.Temperature has gone outside configured limits.Check the environment where the probe is placed. Download data to review the temperature excursion details.
Device not starting recording.Not properly configured or "Start/Mark" button not held long enough.Re-configure the device using LogTag Analyzer. Ensure the "Start/Mark" button is pressed and held until the "OK" light flashes.
Температураны туура эмес көрсөткүчтөр.Damaged probe or incorrect probe connection.Check the probe for visible damage. Ensure the probe is securely connected to the TREX-8 unit.

Техникалык шарттар

ӨзгөчөлүкДеталь
МоделTREX-8
Зонд түрүExternal ST100S-15 Remote Probe
Өлчөө диапазону-40°Cден 85°Cге чейин (-40°Fтен 185°Fге чейин)
Тактык±0.5°C
БатареяNon-replaceable, 2-3 years typical life
Керектүү аксессуарLTI-HID Docking Station (sold separately)

Кепилдик маалымат

LogTag Recorders products are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official LogTag жаздыруу webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Legal Disclaimer: THIS PRODUCT IS NOT A VFC VACCINE MONITORING KIT - PLEASE SEE ITEM VAC-TRED30-KIT-2.

Колдоо

For technical support, software downloads, or additional product information, please visit the official LogTag жаздыруу website or contact their customer service department. Ensure you have your product model number (TREX-8) and any relevant purchase details ready when seeking support.

Official LogTag Дүкөн: LogTag Amazon'до дүкөн