WAC Lighting TK-103 Line Voltage Track Head User Manual

1. Киришүү

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of the WAC Lighting TK-103 Line Voltage Track Head. This fixture is designed for use with 120V J Track systems and includes an 8W GU10 LED bulb. Please read these instructions thoroughly before installation and retain them for future reference.

The TK-103LED-BK track head offers a sleek design and efficient lighting for various indoor applications. It features a GU10 lamp base, allowing for easy bulb replacement without specialized tools.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).

• Ensure the power supply is turned off before installation, removal, or maintenance.
• Бул продукт кургак жерлерде гана имараттын ичинде колдонуу үчүн арналган.
• Аппаратты өзгөртүүгө аракет кылбаңыз. Ар кандай өзгөртүүлөр кепилдикти жокко чыгарып, коопсуздук коркунучун жаратышы мүмкүн.
• Орнотуу процессине ишенбесеңиз, квалификациялуу электрикке кайрылыңыз.
• Максималдуу ваттан ашпаңызtage specified for the bulb type.
• Күйүүчү материалдарды жарыктан алыс кармаңыз.

Сунуш 65 Эскертүү: Бул продукт Калифорния штатына рак жана тубаса кемтиктерди же башка репродуктивдик зыян келтирерин белгилүү болгон химиялык заттарды камтышы мүмкүн. Көбүрөөк маалымат алуу үчүн, төмөнкү дарекке өтүңүз: www.P65Warnings.ca.gov.

3. Пакеттин мазмуну

• WAC Lighting TK-103 Line Voltage Track Head (JTK-103LED-BK)
• 8W GU10 LED Bulb (pre-installed)
• Орнотуу нускамалары

4. Техникалык шарттар

Figure 1: Technical dimensions of the TK-103 track head. The fixture measures approximately 5 7/16 inches in height, 3 1/16 inches in width, and 2 5/8 inches in depth.

5. Орнотуу жана орнотуу

The WAC Lighting TK-103 track head is designed for easy installation onto a 120V J Track system. Ensure the track system is properly installed and powered off before proceeding.

1. Кубатты өчүрүү: Locate the circuit breaker or fuse box and turn off the power supply to the track lighting system. Verify power is off using a voltage сыноочу.
2. Identify Track Type: Confirm your track system is a J Track (also known as J2 or Juno track). This fixture is specifically designed for J Track configurations.
3. Insert Track Adaptor: Align the track adaptor on the fixture with the track channel. The adaptor has a specific orientation; ensure the polarity tab aligns with the track's neutral conductor.
4. Коопсуз арматура: Push the track head firmly into the track channel and rotate the adaptor's locking tab (if present) or twist the entire fixture clockwise until it locks securely into place. The fixture should make solid electrical contact with the track conductors.
5. Adjust Aiming: Once secured, the fixture can be adjusted. It offers 350 degrees of horizontal rotation and 90 degrees of vertical aiming. Loosen the aiming screws, position the light as desired, and then tighten the screws to hold the position.
6. Күчтү калыбына келтирүү: Once all fixtures are installed and secured, restore power to the track lighting system at the circuit breaker.

Figure 2: The WAC Lighting TK-103 track head installed on a compatible J track. The fixture is black with a black track adaptor and a visible LED bulb.

6. Иштөө нускамалары

The TK-103 track head operates directly from the 120V track system. Once installed and power is restored, the light will illuminate when the track system is switched on.

• Күйгүзүү/өчүрүү башкаруу: The light is controlled by the wall switch connected to your track lighting system.
• алсыздатуу: This LED fixture is designed for smooth and continuous dimming from 100% down to 1% when used with a compatible electronic low voltage (ELV) dimmer. Ensure your dimmer is suitable for LED loads.
• Максатты тууралоо: The fixture allows for precise light direction. Loosen the aiming screws to adjust the horizontal rotation (350 degrees) and vertical tilt (90 degrees) of the light head. Tighten the screws after adjustment to secure the position.

7. Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your track head.

• Тазалоо: Тазалоодон мурун электр кубатынан ажыратыңыз. Жабдууну жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар каптамага зыян келтириши мүмкүн.
• Лампаны алмаштыруу: The GU10 LED bulb can be easily replaced from the front without the use of tools.
  1. Түзмөктү өчүрүңүз.
  2. Gently twist and pull the existing GU10 bulb to remove it.
  3. Insert a new GU10 LED bulb (maximum 8W LED or 50W Halogen, if using the non-LED version) by aligning the pins and pushing it into the socket, then twisting slightly to secure.
  4. Күчтү калыбына келтириңиз.
• Текшерүү: Periodically inspect the fixture and track for any signs of damage or loose connections. Address any issues promptly.

8. Кыйынчылыктарды

If you encounter issues with your WAC Lighting TK-103 track head, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact WAC Lighting customer support or a qualified electrician.

9. Кепилдик жана колдоо

Кепилдик: WAC Lighting provides a 5-year functional warranty and a 2-year finish warranty for this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For warranty service or technical support, please visit the official WAC Lighting website or contact their customer service department. Contact information can typically be found on the WAC Lighting webсайт же продукт таңгак.

Өндүрүүчү: WAC жарыктандыруу

Webсайт: www.waclighting.com