Belimo FSLF24-S US Fire and Smoke Damper Actuator Manual
Model: FSLF24-S US
1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Belimo FSLF24-S US Fire and Smoke Damper Actuator. This device is designed for the reliable control of fire and smoke dampers in ventilation and air conditioning systems, ensuring safety in critical building environments. Please read this manual thoroughly before proceeding with installation or operation.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ:
Орнотуу жана тейлөө квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
Disconnect all power before installing or servicing the actuator to prevent electric shock.
Бардык зымдар жергиликтүү жана улуттук электр эрежелерине ылайык келээрин текшериңиз.
Жүргүзгүчтү белгиленген көлөмдөн ашык иштетпеңизtagэлектрондук жана айлана-чөйрөнүн чектөөлөрү.
This actuator is a safety device; ensure it is installed correctly and tested regularly.
3. Пакеттин мазмуну
Таңгактан чыгарганда бардык буюмдардын бар экенин жана бузулбаганын текшериңиз:
Belimo FSLF24-S US Fire and Smoke Damper Актуатор
Mounting Bracket/Hardware (if applicable)
Көрсөтмө (бул документ)
4. Техникалык шарттар
Бренд
Belimo
Модель номери
FSLF24-S US
Тtage
24 вольт
Материал
Пластик
Монтаж түрү
Панел орнотуу
Туташтыргыч түрү
Бурама
Элемент Салмагы
0.01 унция
5. Орнотуу жана орнотуу
The Belimo FSLF24-S US actuator is designed for panel mounting and requires careful installation to ensure proper function and safety. Always refer to the specific wiring diagrams provided with the product packaging for detailed electrical connections.
5.1 Жүргүзгүчтү орнотуу
Ensure the mounting surface is clean, dry, and capable of supporting the actuator's weight.
Position the actuator on the damper shaft according to the damper manufacturer's instructions.
Secure the actuator using appropriate mounting hardware, ensuring a firm and stable connection.
damper can move freely without obstruction after mounting.
5.2 Электр байланыштары
The FSLF24-S US actuator operates on 24 Volts. Electrical connections should only be made by a licensed electrician in accordance with all applicable codes.
Disconnect power to the circuit before making any connections.
Connect the 24V power supply to the designated screw terminals on the actuator.
Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
Double-check wiring against the provided diagram to prevent damage to the actuator or system.
1-сүрөт: Фронт view of the Belimo FSLF24-S US Fire and Smoke Damper Actuator, showing its orange casing, control dial, and connection points. This image illustrates the general appearance and key features of the actuator for installation reference.
6. Иштөө нускамалары
The Belimo FSLF24-S US actuator is designed for automatic operation in conjunction with a fire alarm or building management system. It typically operates in a fail-safe mode, meaning it will drive the damper to a safe position (e.g., closed) upon loss of power.
6.1 Баштапкы кубаттуулук
After completing all electrical connections and mounting, restore power to the actuator.
Observe the actuator's initial movement. It should drive the damper to its default position (e.g., open or closed, depending on configuration).
damper moves smoothly and without obstruction.
6.2 Функционалдык тестирлөө
Regular functional testing is crucial for fire and smoke dampers. Consult local fire safety regulations for required testing intervals.
Initiate a test sequence from your building management system or fire alarm panel to activate the dampэ.
Confirm that the actuator drives the damper to its intended fire/smoke safety position.
damper returns to its normal operating position once the test signal is removed.
7. Техникалык тейлөө
The Belimo FSLF24-S US actuator is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended.
Жылдык текшерүү: Visually inspect the actuator and its connections for any signs of wear, damage, or corrosion.
Функционалдык текшерүү: Perform a functional test of the damper and actuator as per local regulations (e.g., NFPA 80, NFPA 105).
Тазалоо: Keep the actuator free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
Майлоонун кереги жок: The actuator is factory-lubricated and does not require additional lubrication.
8. Кыйынчылыктарды
If the actuator is not functioning as expected, consult the following table before contacting technical support.
Көйгөй
Мүмкүн себеп
Чечим
Иштеткич кыймылдабайт.
No power supply; incorrect wiring; internal fault.
Check 24V power supply; verify wiring against diagram; contact technical support if power and wiring are correct.
Текшерүү гamper for obstructions; verify proper mounting and linkage; contact technical support.
Actuator makes unusual noises.
Mechanical issue; internal component failure.
Disconnect power and inspect for visible damage; contact technical support.
9. Кепилдик жана колдоо
Belimo products are manufactured to high standards and typically come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Belimo webсайт.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Belimo customer support or your authorized Belimo distributor. When contacting support, please have your product model number (FSLF24-S US) and serial number (if applicable) readily available.
