Introduction
The Brookstone BK798314 Grill Alert Talking Remote Meat Thermometer is designed to help you achieve perfectly cooked meats by monitoring internal temperatures wirelessly. This device features a remote receiver that provides real-time temperature updates and audible alerts, allowing you to monitor your cooking from up to 300 feet away. Please read this manual thoroughly to ensure proper use and care of your thermometer.
Пакеттин мазмуну
Сиздин пакетте бардык компоненттер бар экенин текшериңиз:
- Wireless Transmitter Unit
- Remote Receiver Unit
- Stainless Steel Meat Probe
- Колдонуучунун Колдонмосу (бул документ)

Сүрөт: The Brookstone Grill Alert Talking Remote Meat Thermometer includes a wireless transmitter, a receiver unit, and a meat probe.
Жайгашуу
1. Батареяны орнотуу
Both the transmitter and receiver units require batteries (typically AAA, not always included).
- Locate the battery compartment on the back of both the transmitter and receiver units.
- Бөлүмдүн капкагын ачыңыз.
- Туура полярдуулукту (+/-) камсыз кылуу менен керектүү батарейкаларды салыңыз.
- Батарея уясынын капкагын бекем жабыңыз.
2. Зонд байланышы
Connect the stainless steel meat probe to the designated port on the transmitter unit. Ensure the connection is firm.
3. Алгачкы жупташтыруу (зарыл болсо)
Most units automatically pair when powered on. If your units do not connect, refer to the following steps:
- Өткөргүчтүн да, кабыл алгычтын да жаңы батареялары бар экенин жана кубатталганын текшериңиз.
- Place the transmitter and receiver close to each other (within 3 feet).
- Press and hold the "Pair" button (if available) on both units simultaneously for a few seconds until a connection is established. The receiver display should show a signal indicator.
Иштөө нускамалары
1. Күйгүзүү / Өчүрүү
басыңыз Күч button on the receiver unit to turn it on or off. The transmitter unit typically powers on automatically when the probe is connected and batteries are inserted.

Сүрөт: The receiver unit's display shows the selected meat type, desired doneness, target temperature, and current temperature. Buttons for 'Select', 'Cook', and 'Power' are visible below the screen.
2. Эттин түрүн жана бышкандыгын тандоо
The receiver unit allows you to choose from various pre-programmed meat types and desired doneness levels.
- басыңыз Тандоо button to cycle through available meat types (e.g., Beef, Poultry, Pork, Fish, Turkey).
- Once the desired meat type is displayed, press the Кук button to cycle through doneness levels (e.g., Rare, Medium Rare, Medium, Well Done). The target temperature will adjust automatically based on your selection.
- The display will show the selected meat type, doneness, and the corresponding target temperature.
3. Setting Custom Temperatures (if applicable)
Some models allow for custom temperature settings. Consult your specific model's instructions for this feature.
4. Зондду киргизүү
Carefully insert the stainless steel probe into the thickest part of the meat, avoiding bone or gristle. Ensure the probe tip is fully embedded for an accurate reading.
5. Monitoring Temperature and Alerts
Place the transmitter unit near your grill or oven, ensuring it is within range of the receiver (up to 300 feet). The receiver will display the current internal temperature of the meat.
- As the meat cooks, the receiver will update the current temperature.
- When the temperature approaches the target, the unit will provide an audible "food almost ready" alert.
- Once the target temperature is reached, the unit will announce "food is done" and may emit a continuous alarm.
- Remove the meat from the heat source immediately when the "food is done" alert sounds.
Техникалык тейлөө жана кам көрүү
- Пробду тазалоо: After each use, carefully clean the stainless steel probe with warm, soapy water. Rinse thoroughly and dry completely. Do not immerse the probe cable or connector in water.
- Cleaning Units: Wipe the transmitter and receiver units with a damp cloth. Do not immerse either unit in water or expose them to excessive moisture.
- Сактагыч: Store the thermometer in a dry place at room temperature when not in use.
- Батареяны алмаштыруу: Replace batteries when the display dims or the unit fails to power on. Remove batteries if storing the unit for extended periods to prevent leakage.
Проблемаларды чечүү
- No temperature reading or "---" on display:
- Ensure the probe is securely plugged into the transmitter.
- Check if the probe is damaged. A faulty probe may need replacement.
- Verify that the transmitter and receiver are powered on and within range.
- Эки бирдиктеги батарейкаларды алмаштырыңыз.
- No signal or connection between units:
- Ensure both units have fresh batteries and are powered on.
- Ресиверди тараткычка жакын жылдырыңыз.
- Avoid placing the transmitter near large metal objects or strong electromagnetic interference sources.
- Attempt to re-pair the units if your model supports manual pairing.
- Туура эмес температура көрсөткүчтөрү:
- Ensure the probe is inserted into the thickest part of the meat, away from bone or gristle.
- Verify that the selected meat type and doneness are correct for your cooking.
- Test the probe in boiling water (should read approximately 212°F / 100°C) or ice water (should read approximately 32°F / 0°C) to check its accuracy.
Техникалык шарттар
- Модел: BK798314
- Байланыш: Bluetooth (Wireless range up to 300 ft)
- Дисплей түрү: Санарип
- Өзгөчөлүктөр: Remote, Talking Alerts
- Проб материалы: Дат баспаган болот
- Кубат булагы: Батарея менен иштейт
- Кам көрүү боюнча көрсөтмөлөр: Wipe Clean (probe hand wash only)
- Өлчөмдөрү: Болжол менен 10.7 x 8.9 x 3.4 дюйм (Таңгак)
- Салмагы: Болжол менен 1.4 фунт
Кепилдик жана колдоо
Кепилдик жөнүндө маалымат же техникалык колдоо алуу үчүн, сатып алууңузга тиркелген документтерди караңыз же расмий Brookstone дүкөнүнө баш багыңыз. webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.





