1. Продукт бүтүп калдыview
The Duravit 0074030062 Metro Flush Valve is an essential component for your toilet's flushing mechanism. This is an original replacement part designed for Duravit Metro toilets, featuring a 3-inch one-piece design and engineered for a single flush at 1.28 gallons per flush (gpf). It ensures efficient and reliable water discharge from the toilet tank into the bowl.
Image: The Duravit Metro 3-inch flush valve, showing its white plastic construction, integrated flapper, and metal chain for connection to the flush lever.
2. Орнотуу (Орнотуу)
2.1 Коопсуздук чаралары
- Кандайдыр бир орнотууну же тейлөөнү баштоодон мурун ар дайым ажатканага болгон сууну өчүрүңүз.
- Drain the toilet tank completely before removing old components.
- Зарыл болсо, кол кап сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
2.2 Керектүү куралдар
- Жөнгө салынуучу ачкыч же кычкач
- Sponge or towel for water cleanup
- Bucket (optional, for draining)
2.3 Орнотуу кадамдары
- Turn off the water supply valve located at the base of the toilet.
- Бактагы суунун көпчүлүгүн агызып жиберүү үчүн унитазды чайкаңыз. Калган сууну губка же сүлгү менен кетириңиз.
- Disconnect the old flush valve from the toilet tank. This typically involves unscrewing a large nut from underneath the tank and detaching the refill tube and flush lever chain.
- Clean the area where the flush valve seats to ensure a proper seal.
- Place the new Duravit 0074030062 flush valve into the opening at the bottom of the tank, ensuring the gasket is properly seated.
- From underneath the tank, secure the flush valve with the large mounting nut, tightening it firmly but without overtightening to avoid cracking the tank.
- Connect the refill tube to the overflow pipe of the new flush valve.
- Attach the flush lever chain to the flapper arm, ensuring there is a slight amount of slack (approximately 1/2 inch) when the flapper is closed. Too much tension will prevent a proper seal, and too much slack will prevent a full flush.
- Turn the water supply back on and allow the tank to fill.
- Check for any leaks around the base of the flush valve and the water supply connection.
- Perform several test flushes to ensure proper operation and water level.
3. Иштөө нускамалары
The Duravit 0074030062 Metro Flush Valve is designed for single-flush operation at 1.28 gpf. To operate, simply press or push the toilet's flush lever. This action lifts the flapper, allowing water to flow from the tank into the toilet bowl, initiating the flush cycle. Once the tank is empty, the flapper will return to its closed position, and the tank will begin to refill.
4. Техникалык тейлөө
Regular maintenance helps ensure the longevity and efficient operation of your flush valve.
- Тазалоо: Periodically inspect the flapper and the flush valve seat for mineral deposits or debris. Clean with a soft brush and mild, non-abrasive cleaner if necessary. Avoid harsh chemicals that can damage rubber components.
- Flapper Inspection: Check the flapper for signs of wear, cracking, or stiffness. A worn flapper can lead to continuous running water. Replace the flapper if it appears damaged or is not sealing properly.
- Чынжырды тууралоо: Ensure the flush chain has the correct amount of slack. Too tight, and the flapper won't seal; too loose, and it won't lift fully. Adjust as needed.
- агып текшерүүлөр: Regularly check for leaks around the base of the toilet and inside the tank. A small amount of food coloring in the tank can help identify slow leaks past the flapper if the color appears in the bowl without flushing.
5. Кыйынчылыктарды
Бул жерде кеңири таралган көйгөйлөр жана алардын мүмкүн болгон чечимдери келтирилген:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Даараткана тынымсыз иштеп жатат | Flapper not sealing, chain too tight, debris on valve seat. | Adjust chain slack, clean valve seat, inspect/replace flapper. |
| Начар же толук эмес жуу | Insufficient water level, flapper not opening fully, clogged siphon jet. | Adjust fill valve to increase water level, check chain for proper slack, clear siphon jet. |
| No flush when lever is pressed | Chain disconnected or broken, flush lever broken. | Reconnect or replace chain, replace flush lever. |
6. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | Duravit |
| Модель номери | 0074030062 |
| Бөлүмдүн номери | 0074030062 |
| Элемент Салмагы | 9.8 унция |
| Пакеттин өлчөмдөрү | 11.89 x 8.9 x 4.02 дюйм |
| Чыпкалоо түрү | Single Flush |
| Gallons Per Flush (gpf) | 1.28 gpf |
| Клапандын көлөмү | 3 дюйм |
| ASIN | B00AYM03OC |
| Дата биринчи жеткиликтүү | 8-январь, 2013-жыл |
7. Кепилдик жана колдоо
As an original replacement part, the Duravit 0074030062 Metro Flush Valve is manufactured to Duravit's quality standards. For specific warranty information, please refer to the warranty documentation provided with your original Duravit toilet or contact Duravit customer support directly. For technical assistance or further inquiries, please reach out to Duravit's official support channels.
