King Gates Stylo 4 White (4-Channel Radio Transmitter) User Manual

Introduction

This manual provides comprehensive instructions for the King Gates Stylo 4 White 4-Channel Radio Transmitter. This device operates at a frequency of 433.92MHz and features four programmable buttons, designed for simple and efficient remote control of compatible gate systems. It is supplied with necessary instructions and batteries for immediate use.

Продукт бүттүview

Фронт view of the King Gates Stylo 4 White remote control, showing its black body with chrome accents and four white circular buttons arranged vertically. The 'KINGGates Made in Italy' logo is visible at the bottom.

Негизги өзгөчөлүктөрү:

• Remote Gate Frequency: 433.92 MHz
• Number of Channels: 4 (four independent buttons)
• Programming Type: Enregistrement dans le récepteur (Programming directly into the receiver)
• Батарея түрү: CR2032 (кошулган)
• Compact Dimensions: 35mm x 70mm x 8mm
• Durable Design: White and chrome finish

Техникалык шарттар

Орнотуу жана программалоо

The King Gates Stylo 4 remote control is designed for simple programming directly into your gate receiver. No special equipment is required for this process.

Батарея орнотуу:

The remote control comes with a CR2032 battery. If the battery is not pre-installed or needs replacement, follow these steps:

1. Locate the battery compartment on the back or side of the remote.
2. Carefully open the compartment using a small screwdriver or coin if necessary.
3. CR2032 батареясын оң (+) тарабын өйдө каратып салыңыз.
4. Батарея отсегин бекем жабыңыз.

Programming the Remote to Your Receiver:

The exact programming procedure may vary slightly depending on your specific gate receiver model. Always refer to your gate opener's receiver manual for detailed instructions. General steps often include:

1. Locate the programming button on your gate receiver unit. This button is often labeled "PROG", "LEARN", or "MEM".
2. Press and hold the programming button on the receiver until an indicator light (LED) illuminates or flashes, indicating it is in programming mode.
3. While the receiver is in programming mode, press the desired button on your new King Gates Stylo 4 remote control that you wish to program. Hold the button for a few seconds.
4. The receiver's indicator light should change (e.g., turn solid, flash rapidly, or turn off) to confirm successful programming.
5. Release the button on the remote control.
6. Кабыл алуучу программалоо режиминен автоматтык түрдө чыгышы үчүн бир нече секунд күтө туруңуз же чыгуу үчүн кабыл алгычтагы программалоо баскычын кайрадан кыскача басыңыз.
7. Test the newly programmed button on your remote to ensure it operates the gate correctly.

Repeat the process for any additional buttons you wish to program for different functions or gates, if your receiver supports multiple channels.

Иштөө нускамалары

Once programmed, operating your King Gates Stylo 4 remote control is straightforward:

• Opening/Closing Gate: Press the programmed button once to activate the gate. Pressing it again will typically stop or reverse the gate's movement, depending on your gate system's configuration.
• Бир нече функциялар: If you have programmed different buttons for different gates or functions (e.g., pedestrian gate, full gate opening), simply press the corresponding button for the desired action.
• Диапазон: Ensure you are within the operational range of your gate receiver for reliable performance. Obstructions can reduce the effective range.

Техникалык тейлөө

To ensure the longevity and optimal performance of your King Gates Stylo 4 remote control, follow these maintenance guidelines:

• Батареяны алмаштыруу: If the remote's range decreases significantly or the indicator light (if present) does not illuminate, it may be time to replace the CR2032 battery. Refer to the "Battery Installation" section for instructions.
• Тазалоо: Clean the remote control periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the casing же баскычтар.
• Сактагыч: Store the remote in a dry place, away from extreme temperatures, direct sunlight, and moisture.
• Физикалык зыян: Avoid dropping the remote or subjecting it to strong impacts, as this can damage internal components.

Проблемаларды чечүү

If you encounter issues with your King Gates Stylo 4 remote control, consider the following:

• Пульт иштебейт:
  • Батареяны текшериңиз. Керек болсо алмаштырыңыз.
  • Ensure you are within the operational range of the gate receiver.
  • Verify that the remote is correctly programmed to the receiver. If unsure, try reprogramming it following the "Programming the Remote" instructions.
  • Пульт менен кабыл алгычтын ортосундагы тоскоолдуктарды текшериңиз.
• Кыскартылган диапазон:
  • Батареяны алмаштырыңыз.
  • Ensure there are no new sources of radio interference (e.g., new electronic devices) near the gate receiver.
  • Check the antenna on your gate receiver, if applicable, to ensure it is not damaged or obstructed.
• Gate Not Responding Consistently:
  • This could indicate a weak battery in the remote or an issue with the gate receiver itself.
  • Ensure the gate mechanism is not physically obstructed.

If problems persist after attempting these troubleshooting steps, consult a qualified technician or contact King Gates customer support.

Кепилдик жана колдоо

The King Gates Stylo 4 White (4-Channel Radio Transmitter) comes with a 1 жылдык кепилдик сатып алынган күндөн тартып. Бул кепилдик өндүрүштүк кемчиликтерди камтыйт жана буюмдун нормалдуу колдонууда белгиленгендей иштешин камсыздайт.

For warranty claims, technical support, or further assistance, please contact your authorized King Gates dealer or the point of purchase. Keep your proof of purchase for warranty validation.