Motorline PROFESSIONAL FALK

MOTORLINE MX4SP DSM Remote Control User Manual

Model: FALK

1. Киришүү

This user manual provides detailed instructions for the MOTORLINE MX4SP DSM remote control. Designed for gate and garage door systems, this 4-button remote operates on a 433.92 MHz frequency. Please read this manual thoroughly before attempting to set up or operate your device to ensure correct functionality and longevity.

MOTORLINE MX4SP DSM remote control with its packaging and included manual

Сүрөт 1.1: The MOTORLINE MX4SP DSM remote control shown with its original packaging and a small instruction leaflet.

2. Продукт бүтүп калдыview

The MOTORLINE MX4SP DSM is a compact and durable remote control. It features four distinct buttons for controlling various functions of your compatible gate or garage door opener. The remote is designed for ease of use and reliable performance.

Фронт view of the MOTORLINE MX4SP DSM remote control

Сүрөт 2.1: Фронт view of the MOTORLINE MX4SP DSM remote control, highlighting its four control buttons and brand logo.

Important Note on Model Identification: There are two similar MOTORLINE models: MX4SP RCM and MX4SP DSM. This manual specifically pertains to the MX4SP DSM model. The key difference is visible on the remote's internal circuit board: the MX4SP DSM model бар small resistances located on the bottom right of its circuit board, whereas the MX4SP RCM model does жок. If you are replacing an existing remote, it is essential to open your old remote and verify this detail to ensure compatibility and correct programming.

Артка view of a MOTORLINE remote control, showing the battery compartment area and model label

Сүрөт 2.2: Артка view of a MOTORLINE remote control. This view typically shows the battery compartment and model information. For MX4SP DSM identification, the internal circuit board must be inspected for specific resistances.

3. Орнотуу

3.1. Батареяны орнотуу

  1. Алыстан башкаруу пультун c этияттык менен ачыңызasing. Бул үчүн кичинекей бурагыч же тиштүү аспап талап кылынышы мүмкүн.
  2. Insert one CR2 battery, ensuring correct polarity (+/-). The product specifications indicate 1 CR2 battery is required. (Note: Some variants or older models might use 2x CR2016 3V. Please confirm the correct battery type for your specific remote by checking the battery compartment or original packaging.)
  3. Алыстан башкаруу пультун c жабыңызasing securely, ensuring all clips or screws are fastened.

3.2. Программалоо боюнча көрсөтмөлөр

The programming process for the MOTORLINE MX4SP DSM remote control is generally simple and does not require specialized equipment. The exact steps may vary slightly depending on your gate or garage door opener's receiver unit. Always refer to your opener's specific manual for detailed instructions on how to put it into programming mode.

Жалпы программалоо кадамдары:

  1. Prepare the Receiver: Locate the programming or "learn" button on your gate or garage door opener's receiver unit. Press and hold this button until the indicator light (if present) illuminates or flashes, signaling that it is in programming mode.
  2. Пультту программалоо: While the receiver is in programming mode (usually within a few seconds of pressing its button), press and hold the desired button on your new MOTORLINE MX4SP DSM remote control for approximately 2-3 seconds.
  3. Программалоону ырастоо: Release the button on the remote. The receiver's indicator light may change, flash, or turn off to confirm successful programming.
  4. Сыноо операциясы: Test the remote control to ensure it operates the gate or door correctly.
  5. Multiple Remotes: If programming additional remotes, repeat the process for each remote.

If programming difficulties persist, ensure your remote is indeed the MX4SP DSM model as described in Section 2, and consult the manual for your specific gate/garage door opener or contact a qualified technician.

4. Иштөө нускамалары

Once successfully programmed, operating the MOTORLINE MX4SP DSM remote control is straightforward:

5. Техникалык тейлөө

6. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Программалоодон кийин алыстан башкаруу иштебейт.Dead or low battery. Incorrect programming procedure. Incompatible remote model (RCM vs. DSM).Replace the battery (see Section 3.1). Re-program the remote control carefully following Section 3.2. Verify your remote is the MX4SP DSM model by checking its internal circuit board for resistances.
Reduced operating range or intermittent function.Low battery. Physical obstructions between remote and receiver. Radio frequency interference from other devices.Replace the battery. Ensure a clear line of sight between the remote and the receiver unit. Identify and move away from potential sources of interference.
Receiver unit does not enter programming mode.Incorrect button pressed on receiver. Faulty receiver.Consult your gate/garage door opener's manual to confirm the correct programming button and procedure. Contact a qualified technician if the receiver appears faulty.

7. Техникалык шарттар

8. Кепилдик жана колдоо

This product typically includes a 1-year availability for spare parts. For comprehensive warranty terms and conditions, please refer to the documentation included with your purchase or contact your authorized retailer. For technical assistance, troubleshooting beyond this manual, or general inquiries, please reach out to Motorline PROFESSIONAL customer service or your local dealer.

Тектеш документтер - FALK

Preview Motorline MX14 зымсыз эмитенти иштетүү жана программалоо боюнча колдонмо
Дарбазаны автоматташтыруу системалары үчүн Motorline MX14 зымсыз эмиттерди иштетүү жана программалоо боюнча комплекстүү колдонмо, анын ичинде техникалык мүнөздөмөлөр, орнотуу жана туташуу схемалары.
Preview Instrukcja Obsługi Centrali Sterującej Motorline MC2
Szczegółowa instrukcja obsługi centrali sterującej Motorline MC2 автоматтык браммаларды, орнотууларды, программаларды, сыноолорду, көйгөйлөрдү чечет.
Preview Motorline Professional MX Series Remote Controls User and Installer Manual
User and installer manual for Motorline Professional MX95N (1-channel), MX96N (5-channel), and MX97N (15-channel) rolling code remote controls. Details features, button functions, power, and specifications for gate and garage door automation.
Preview JAG Колдонуучунун жана Орнотуучунун колдонмосу - Motorline Professional Gate Automation
Бул колдонмо Motorline Professional JAG автоматтык дарбаза системасын, анын ичинде JAG400 жана JAG600 моделдерин орнотуу, эксплуатациялоо, тейлөө жана көйгөйлөрдү чечүү боюнча комплекстүү нускамаларды камтыйт.
Preview Motorline LINCE 230V/110V/24V автоматтык дарбаза ачуучу колдонуучу жана орнотуучу колдонмо
Бул колдонмодо 230V, 110V жана 24V системалары үчүн Motorline LINCE сериясындагы автоматтык дарбаза ачкычтарын (LINCE300, LINCE400, LINCE600 моделдери) орнотуу, иштетүү жана техникалык тейлөө боюнча кеңири көрсөтмөлөр берилген. Ал коопсуздук боюнча көрсөтмөлөрдү, техникалык мүнөздөмөлөрдү, бузулууларды оңдоону жана башкаруу тактасынын зым схемаларын камтыйт.
Preview Motorline LINCE автоматтык дарбаза ачуу системасы - Орнотуу жана колдонуучунун колдонмосу
Motorline LINCE сериясындагы автоматтык дарбаза ачуучулары (LINCE 300, 400, 600) үчүн коопсуздукту, орнотуу кадамдарын, техникалык мүнөздөмөлөрүн, бузулууларды оңдоону жана техникалык тейлөөнү камтыган толук орнотуу жана колдонуучу колдонмосу. 230V, 110V жана 24V моделдерин колдойт.