1. Киришүү
This manual provides instructions for the Linear MCT-3 Megacode 3-Channel Remote Control, model DNT00089. This remote is designed for use with Linear's Mega Code series of receivers, commonly found in garage door openers and automatic gate systems. It allows for the control of up to three separate devices.
The Linear MCT-3 remote transmits a unique code for each of its three buttons. This enables control of multiple devices, such as a garage door opener, an access gate, and an additional garage door operator, all from a single remote.
Сүрөт 1.1: Comparison showing the Linear DNT00093 (left) and DNT00089 (right) remote controls. The DNT00093 is a replacement for the DNT00089, indicating functional equivalence.
2. Продукциянын өзгөчөлүктөрү
- Three-Channel Operation: Controls up to three separate Linear Mega Code compatible devices.
- Mega Code Technology: Utilizes secure, encrypted radio frequency transmission.
- Visor Clip Design: Easily attaches to a vehicle's sun visor for convenient access.
- Компакт жана бышык: Designed for everyday use.
- Жөнөкөй программалоо: Simple "Learn" button programming with compatible receivers.
Сүрөт 2.1: Фронт view of the Linear MCT-3 Megacode 3-Channel Remote Control, showing its three distinct buttons.
3. Орнотуу жана программалоо
To program your Linear MCT-3 remote control, follow these steps. Ensure you are near your garage door opener or gate receiver during this process.
- Locate the Receiver's Learn Button: On your garage door opener or gate receiver, find the "Learn" button. The location of this button varies by model, but it is typically on the motor unit itself. Refer to your opener's manual if you cannot locate it.
- Үйрөнүү режимин иштетүү: Press and release the "Learn" button on your receiver. The indicator light on the receiver will typically illuminate or flash, indicating it is in programming mode. You usually have about 30 seconds to complete the next step.
- Пультту программалоо: While the receiver is in learn mode, press and hold the desired button on your Linear MCT-3 remote control that you wish to use for this device.
- Программалоону ырастоо: Release the remote button once the receiver's indicator light changes (e.g., turns off, flashes rapidly, or the garage door/gate moves slightly). This confirms successful programming.
- Сыноо операциясы: Press the programmed button on your remote control to ensure it activates the garage door or gate.
Эскертүү: If you wish to program additional buttons on the remote for other devices, repeat steps 2-5 for each device, selecting a different button on the remote each time.
4. Операция
Once programmed, operating your Linear MCT-3 remote control is straightforward:
- Түзмөктү иштетүү: Press the corresponding button on the remote control that has been programmed to your garage door opener or gate.
- Диапазон: For optimal performance, ensure you are within a reasonable operating range of your receiver. Environmental factors can affect signal range.
5. Тейлөө: Батареяны алмаштыруу
The Linear MCT-3 remote control requires one 9V battery. If the remote's indicator light does not illuminate when a button is pressed, or if the range significantly decreases, the battery may need replacement.
- Алыстан башкаруу пультун C ачыңызasing: Locate the battery compartment cover on the back of the remote. This may require a small screwdriver or prying tool to open carefully.
- Эски батареяны алып салуу: Carefully remove the old 9V battery from its terminals.
- Жаңы батареяны салыңыз: Insert a new 9V alkaline battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
- Жабуу Casing: Батарея бөлүмүнүн капкагын кайра жабыңыз, анын бекем бекитилгенин текшериңиз.
- Сыноо: Test the remote's operation with your programmed device.
Жоюу: Please dispose of old batteries responsibly according to local regulations.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Remote does not activate device. |
|
|
| Кыскартылган иштөө диапазону. |
|
|
| Indicator light on remote does not illuminate. |
|
|
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | MCT-3 DNT00089 (Replaced by DNT00093) |
| Бренд | Сызыктуу |
| Каналдардын саны | 3 |
| Байланыш технологиясы | Radio Frequency (Mega Code) |
| Шайкеш түзмөктөр | Linear Mega Code Receivers |
| Power Source | 1 x 9V батарея |
| Продукциянын өлчөмдөрү | Болжол менен 2 x 1 x 1 дюйм |
| Элемент Салмагы | Болжол менен 0.141 унция |
8. Кепилдик жана колдоо
For specific warranty information and technical support regarding your Linear MCT-3 Megacode 3-Channel Remote Control, please refer to the documentation provided with your purchase or contact Linear directly through their official webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
Кошумча жардам алуу үчүн, сиз иш сапары менен болот Сызыктуу webсайт (мисampле шилтеме, чыныгы шилтеме ар кандай болушу мүмкүн).
