JTS GML-5212 12-Inch Gooseneck Microphone User Manual

1. Киришүү

Welcome to the user manual for your JTS GML-5212 12-Inch Gooseneck Microphone. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your microphone. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Продукт бүтүп калдыview

The JTS GML-5212 is a high-quality 12-inch gooseneck condenser microphone designed for various applications, particularly suitable for podium and conference use. It features a flexible gooseneck for precise positioning and comes bundled with interchangeable capsule modules, allowing for versatile polar pattern selection.

An image showing the JTS GML-5212 12-Inch Gooseneck Microphone, featuring its flexible gooseneck and microphone head with a red band.

3. Негизги өзгөчөлүктөрү

• Жыштык жообу: 60 - 18,000 Hz for clear audio capture.
• Алмаштырылуучу капсулалар: Includes Omni-directional, cardioid, and super cardioid condenser capsules for adaptable use.
• LED көрсөткүчү: Features an LED light to indicate microphone status.
• ийкемдүү каз моюн: Extremely thin and flexible design for accurate microphone placement.
• Low Frequency Roll-off: Equipped with an 80Hz -10dB pad to reduce unwanted low-end noise.

4. Пакеттин мазмуну

Кутудан чыгарганда, төмөнкү нерселердин бардыгы бар экенин текшериңиз:

• JTS GML-5212 Gooseneck Microphone
• Interchangeable Condenser Capsules (Omni-directional, Cardioid, Super Cardioid)

5. Орнотуу

Follow these steps to set up your GML-5212 microphone:

1. Select Polar Pattern: Choose the appropriate interchangeable capsule (Omni-directional, Cardioid, or Super Cardioid) based on your application and screw it onto the microphone head.
2. Connect to Input: Connect the XLR connector at the base of the gooseneck microphone to a compatible mixer or audio interface input. Ensure the input provides phantom power (48V), as this is a condenser microphone and requires external power to operate.
3. Коопсуз орнотуу: If using a microphone base or stand, ensure the microphone is securely mounted.
4. Микрофондун орду: Adjust the flexible gooseneck to position the microphone head optimally for sound capture. For speech, typically position the microphone approximately 6-12 inches from the speaker's mouth.

6. Иштөө

Once set up, operating the GML-5212 is straightforward:

• Күйгүзүү: Activate the phantom power on your mixer or audio interface. The LED indicator on the microphone will illuminate, signifying it is powered on and ready for use.
• Полярдык үлгү тандоо: The polar pattern is determined by the installed capsule. To change the polar pattern, carefully unscrew the current capsule and replace it with the desired one.
• Low Frequency Roll-off: Utilize the 80Hz -10dB pad switch (if present on your model or associated pre-amp) to reduce low-frequency rumble or proximity effect, improving vocal clarity.
• Мониторинг: Monitor your audio levels through your mixer or interface to prevent clipping and ensure clear sound.

7. Техникалык тейлөө

Proper maintenance will extend the life and performance of your microphone:

• Тазалоо: Use a soft, dry cloth to wipe down the microphone body and gooseneck. Avoid using liquid cleaners or solvents, as they can damage the microphone's components.
• Сактагыч: When not in use, store the microphone in a clean, dry environment, preferably in its original packaging or a protective case, to prevent dust accumulation and physical damage.
• Колдонуу: Always handle the microphone with care. Avoid dropping it or subjecting it to excessive force, especially the flexible gooseneck and capsule area.

8. Кыйынчылыктарды

If you encounter issues with your GML-5212 microphone, refer to the following common troubleshooting steps:

• Үн чыгышы жок:
  • Ensure phantom power (48V) is enabled on your mixer or audio interface.
  • Check all XLR cable connections to ensure they are secure and not damaged.
  • Verify that the input channel on your mixer/interface is not muted and gain levels are appropriately set.
  • Confirm the microphone capsule is securely screwed onto the microphone head.
• Начар үн сапаты (бурмалоо, төмөн үн):
  • Adjust the gain level on your mixer/interface. Too high can cause distortion, too low can result in weak signal.
  • Check the microphone's proximity to the sound source. Moving closer or further away can affect sound quality.
  • Ensure the correct polar pattern capsule is selected for your environment and application.
  • Test with a different XLR cable to rule out cable issues.
• LED индикатору күйбөйт:
  • Confirm phantom power is active and correctly supplied to the microphone.
  • Check the XLR cable for any damage or faulty connections.

If problems persist after attempting these steps, please contact JTS customer support or your authorized dealer for further assistance.

9. Техникалык шарттар

Detailed technical specifications for the JTS GML-5212 microphone:

10. Кепилдик жана колдоо

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official JTS webсайт. Кепилдиктин шарттары аймакка жана сатуучуга жараша өзгөрүшү мүмкүн.

If you require technical support, have questions about your product, or need assistance with troubleshooting beyond what is covered in this manual, please contact your authorized JTS dealer or JTS customer service directly. Contact information can typically be found on the JTS official webсайтында же сатып алуу документтери аркылуу.