YSI 251401Y

YSI 251401Y DPD хлорсуз реагент порошогу колдонуучусунун колдонмосу

For pHotoFlex and 900 Chlorine Colorimeter

1. Продукт бүтүп калдыview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Safety Information and Handling

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. Орнотуу жана даярдоо

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

3.1 Керектүү материалдар (кошулбайт)

3.2 Реагенттерди даярдоо

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sampле көлөмү.

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. Даярдоо Сample Cell: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sampсыноо керек.
  2. Сample Cell: s толтурample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. Add Reagent: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sampкамерада.
  4. Аралаш: s капкакample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. Реакция убактысы: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. Өлчөм: Insert the prepared sample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. Натыйжаларды жаздыруу: Record the measurement results immediately.
  8. Тазалоо: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

Эскертүү: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. Техникалык тейлөө жана сактоо

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6. Кыйынчылыктарды

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

КөйгөйМүмкүн себепЧечим
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sample.
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • Verify sample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
Inconsistent or erratic readings.
  • Туура эмес сampле көлөмү.
  • Контаминацияланган сample клеткалар.
  • Air bubbles in sample cell.
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sampле көлөмү.
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

Тектеш документтер - 251401Y

Preview YSI модели 32 өткөргүч өлчөгүч инструкциясы
YSI Model 32 өткөргүч өлчөгүч үчүн нускама, анын жалпы сүрөттөлүшү, спецификациялары, иштөө процедуралары, тейлөө жана калибрлөө.
Preview YSI Pro20/Pro20i тез баштоо боюнча колдонмо: Калибрлөө жана иштетүү
Concise guide for calibrating and operating the YSI Pro20/Pro20i dissolved oxygen meters, covering membrane installation, sensor setup, barometer and DO calibration, salinity compensation, and measurement taking. Includes essential operational steps and contact information.
Preview YSI 3821 Buffer Solution pH 4.00 Коопсуздук маалымат баракчасы (SDS)
YSI 3821 Buffer Solution pH 4.00 үчүн комплекстүү коопсуздук маалымат баракчасы (SDS), продуктунун идентификациясын, коркунучтарын, курамын, биринчи жардамды, колдонууну, сактоону жана ченемдик маалыматты камтыйт.
Preview YSI EcoSense DO200A/DO200M Эриген кычкылтек жана температура аспаптары үчүн колдонуучу колдонмосу
This user manual provides comprehensive instructions for operating, installing, maintaining, and troubleshooting the YSI EcoSense DO200A and DO200M dissolved oxygen and temperature instruments. It includes details on specifications, accessories, and warranty information.
Preview YSIT-1 спутниктик өткөргүчтү иштетүү жана тейлөө боюнча колдонмо
YSI модели YSIT-1 спутниктик өткөргүчү үчүн комплекстүү колдонуучу колдонмосу, анын иштешин, техникалык тейлөөсүн, аппараттык жабдыктарды орнотууну жана сериялык буйрук шилтемесин камтыйт. Чоо-жайы убакытты башкаруу, маалыматтарды сактоо, GOES маалыматтарды форматтоо, RF өткөргүчтү башкаруу жана GPS синхрондоштурууну камтыйт.
Preview YSI IQ Sensor Net MIQ/CHV PLUS иштетүү боюнча колдонмо
Бул колдонуу колдонмосу YSI IQ Sensor Net MIQ/CHV PLUS клапан модулу үчүн толук нускамаларды камтыйт, анда кысылган аба менен башкарылган сенсор тазалоо баштары үчүн орнотуу, орнотуулар, тейлөө жана коопсуздук эрежелери камтылган.