Monoprice 4-Channel Speaker Selector (Model 109995) User Manual

1. Продукт бүтүп калдыview

The Monoprice 4-Channel Speaker Selector allows you to connect a single stereo amplifier or receiver to up to four pairs of stereo speakers. This device enables you to distribute audio signals to different "zones" within your home, providing flexibility in your home audio setup. It includes an optional impedance protection circuit to maintain a stable load for your amplifier, regardless of the number of speakers in use.

2. Коопсуздук боюнча маанилүү маалымат

• Колдонуудан мурун ушул көрсөтмөлөрдү жакшылап окуп чыгыңыз.
• Бул колдонмону келечекте маалымат алуу үчүн сактаңыз.
• Бул шайманды сууга же нымга дуушар кылбаңыз.
• Ensure all connections are secure before powering on your audio system.
• Do not exceed the maximum power rating of 140 watts per channel (without protection) or 70 watts per channel (with protection).
• Always disconnect power from your amplifier/receiver before making or changing any speaker connections.
• Do not attempt to open or service the unit. Refer all servicing to qualified personnel.

3. Пакеттин мазмуну

Please ensure all items are present upon unpacking:

• 1x Monoprice 4-Channel Speaker Selector Unit
• 1x Колдонуучунун колдонмосу (бул документ)

1-сүрөт: Packaging box for the Monoprice 4-Channel Speaker Selector. The box displays the product name and an image of the selector unit.

4. Продукциянын өзгөчөлүктөрү

• Connects one stereo amplifier/receiver to up to four pairs of stereo speakers.
• Supports up to 70 watts per channel with impedance protection enabled.
• Supports up to 140 watts per channel without impedance protection.
• Optional impedance protection circuit ensures a stable load for your ampөмүрлүү.
• Individual on/off buttons for each speaker zone.
• Spring-loaded push terminals for easy speaker wire connection.

5. Орнотуу жана орнотуу

Follow these steps to connect your Monoprice 4-Channel Speaker Selector to your audio system.

5.1 Identify Connections

2-сүрөт: Rear panel of the speaker selector. Note the "L INPUTS R" terminals on the left for amplifier connection and "OUTPUTS" terminals (1-4) for speaker connections.

The rear panel of the speaker selector features one set of stereo inputs labeled "L INPUTS R" for connecting your amplifier or receiver, and four sets of stereo outputs labeled "OUTPUTS 1" through "OUTPUTS 4" for connecting your speaker pairs.

5.2 Электр зымдары боюнча нускамалар

1. Өчүрүү: Сиздин камсыз кылуу amplifier/receiver is turned off and unplugged from the power outlet before making any connections.
2. Prepare Speaker Wires: Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of all speaker wires. Twist the bare wire strands tightly.
3. Туташуу Amplifier to Inputs:
   • туташтыруу Сол (+) output terminal of your ampжашоого чейин Сол (+) input terminal of the speaker selector (under "L INPUTS R").
   • туташтыруу Сол (-) output terminal of your ampжашоого чейин Сол (-) input terminal of the speaker selector.
   • туташтыруу Оң (+) output terminal of your ampжашоого чейин Оң (+) input terminal of the speaker selector.
   • туташтыруу Оң (-) output terminal of your ampжашоого чейин Оң (-) input terminal of the speaker selector.

   Оптималдуу үн сапаты үчүн туура полярдуулукту (+ дан + га жана - дан - га) текшериңиз.

4. Connect Speakers to Outputs: For each pair of speakers (Zone 1, 2, 3, or 4):
   • туташтыруу Сол (+) terminal of your speaker to the Сол (+) output terminal for the desired zone on the speaker selector.
   • туташтыруу Сол (-) terminal of your speaker to the Сол (-) output terminal for the desired zone on the speaker selector.
   • туташтыруу Оң (+) terminal of your speaker to the Оң (+) output terminal for the desired zone on the speaker selector.
   • туташтыруу Оң (-) terminal of your speaker to the Оң (-) output terminal for the desired zone on the speaker selector.

   Maintain consistent polarity for all speaker connections.

5. Impedance Protection Switch: Locate the impedance protection switch (often on the rear or bottom of the unit).
   • КҮЙҮК: Activates the protection circuit. Recommended for amplifiers with minimum impedance ratings below 8 ohms, or when connecting multiple pairs of speakers simultaneously to prevent amplifier overload. This limits power handling to 70W per channel.
   • ӨЧҮК: Disables the protection circuit. Allows for higher power handling (up to 140W per channel) but requires careful consideration of your amplifier's minimum impedance rating and the total impedance of connected speakers. Consult your ampкөтөргүчтүн колдонмосу.
6. Жайгашкан жери: Place the speaker selector in a well-ventilated area, away from heat sources and direct sunlight.

3-сүрөт: Бурчтуу view of the speaker selector, highlighting the front panel with individual speaker zone selection buttons and the rear input/output terminals.

6. Иштөө нускамалары

Once all connections are made and verified, you can begin using your speaker selector.

1. Күйгүзүү: Сайып, күйгүзүңүз ampкөтөргүч/алуучу.
2. Select Speaker Zones: Use the individual push-buttons on the front panel of the speaker selector to turn on or off each pair of connected speakers (Zone 1, 2, 3, or 4).
   • Pressing a button will engage that speaker zone.
   • Pressing it again will disengage the zone.
   • You can select one, multiple, or all speaker zones simultaneously, depending on your listening preference and amplifier capabilities.
3. Үндү тууралоо: Control the overall volume using your amplifier/receiver's volume control.

Note on Impedance Protection: If the impedance protection circuit is enabled, you can safely operate multiple pairs of speakers without concern for amplifier overload. If it is disabled, be mindful of your amplifier's minimum impedance rating when engaging multiple speaker pairs. Operating an amplifier below its minimum impedance rating can cause damage.

7. Техникалык тейлөө

The Monoprice 4-Channel Speaker Selector requires minimal maintenance.

• Тазалоо: Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosol sprays.
• Вентиляция: Ашыкча ысып кетүүнүн алдын алуу үчүн, түзмөктүн желдетүү тешиктери бүтөлүп калбагандыгын текшериңиз.
• Байланыштары: Periodically check all speaker wire connections to ensure they remain secure.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана Кардарларды колдоо

Monoprice өз продукциясынын артында турат. Кепилдик маалыматы, техникалык колдоо же кардарларды тейлөө боюнча суроо үчүн расмий Monopriceке кайрылыңыз website or contact their customer support team directly. Please have your product model number (109995) and purchase information ready when contacting support.

Monoprice расмий Webсайт: www.monoprice.com