Rabalux 5421 UFO Ceiling Light User Manual

Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Rabalux 5421 UFO Ceiling Light. Please read these instructions carefully before installation and retain them for future reference. This product is designed for indoor use only.

Коопсуздук нускамалары

• Always disconnect the main power supply at the circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician or a competent person if you are unsure about electrical wiring.
• тtagэлектр менен камсыздоо (230V) шаймандын талаптарына жооп берет.
• Максималдуу ваттан ашпаңызtagд 60 Вт per E27 bulb. Using higher wattage bulbs can cause overheating and damage to the fixture.
• The fixture has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Жергиликтүү электрдик коддорго ылайык туура жерге туташтырууну камсыз кылыңыз.
• Таңгактоочу материалдарды балдар жетпеген жерде сактаңыз.

Пакеттин мазмуну

Орнотуудан мурун, бардык компоненттердин бар экенин жана бузулбаганын текшериңиз:

• Rabalux 5421 Ceiling Light fixture (wooden frame, metal base, opal diffuser)
• Монтаждоочу жабдыктар (бурамалар, дубал сайгычтар)
• Instruction Manual

Note: Light bulbs (E27) are not included and must be purchased separately.

Орнотуу жана орнотуу

Керектүү куралдар: Бурагыч, бургулоочу, зым кыргычтар, тtagэлектрондук сыноочу, карандаш, өлчөгүч лента.

1. Орнотууга даярданыңыз:
   • Электр тогуна урунбоо үчүн негизги автоматтык өчүргүчтөгү электр тогун өчүрүңүз.
   • Carefully unpack the fixture and inspect it for any damage.
2. Арматураны орнотуу:
   • Position the mounting bracket (usually attached to the fixture's base) against the ceiling at the desired location.
   • Mark the drilling points with a pencil.
   • Drill holes at the marked points and insert appropriate wall plugs (if required for your ceiling type).
   • Берилген бурамалар аркылуу монтаждык кронштейнди шыпка бекитиңиз.
3. Электр байланышы:
   • Connect the household electrical wires to the corresponding terminals on the fixture. Typically:
     • Brown or Red wire (Live) to the 'L' terminal.
     • Blue or Black wire (Neutral) to the 'N' terminal.
     • Green/Yellow wire (Earth) to the '⚡' (Earth) terminal.
   • Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
4. Attaching the Fixture Body:
   • Carefully attach the main body of the light fixture to the mounting bracket, securing it with the screws or fasteners provided.
5. Лампаны орнотуу:
   • Gently remove the opal diffuser by unscrewing the decorative nuts or clips.
   • Screw two E27 bulbs into the lamp holders. Ensure each bulb does not exceed 60W.
   • Carefully reattach the opal diffuser and secure it.
6. Акыркы кадам:
   • Restore power at the main circuit breaker and test the light fixture.

1-сүрөт: The assembled Rabalux 5421 UFO Ceiling Light, featuring a circular wooden frame and a central opal glass diffuser. The light is designed for ceiling mounting.

Иштөө нускамалары

Once properly installed and powered, the Rabalux 5421 UFO Ceiling Light operates via a standard wall switch connected to your household electrical circuit.

• Күйгүзүү/өчүрүү: Жарык бергичти күйгүзүү же өчүрүү үчүн дубалга орнотулган өчүргүчтү колдонуңуз.
• Өчүрүүчү өзгөчөлүгү: This fixture is designed to be dimmable. To utilize this feature, you must use compatible dimmable E27 bulbs and connect the fixture to a suitable dimmer switch (both sold separately). Follow the instructions provided with your dimmer switch and dimmable bulbs for proper operation.

Техникалык тейлөө

• Тазалоо: To clean the fixture, ensure the power is off. Wipe the wooden frame and metal parts with a soft, dry cloth. The opal diffuser can be gently wiped with a slightly damp cloth, then dried immediately. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Лампаны алмаштыруу:
  1. Автоматтык өчүргүчтөгү кубат менен камсыздоону өчүрүңүз.
  2. Carefully remove the opal diffuser.
  3. Unscrew the old E27 bulb(s) counter-clockwise.
  4. Screw in new E27 bulb(s) clockwise, ensuring they do not exceed 60W each.
  5. Reattach the opal diffuser securely.
  6. Кубатты калыбына келтирип, жарыкты сынаңыз.

Проблемаларды чечүү

If you encounter issues with your Rabalux 5421 UFO Ceiling Light, please refer to the following common problems and solutions:

• Жарык күйбөйт:
  • Check if the main power supply is on at the circuit breaker.
  • Дубалдагы которгучтун 'ON' абалында экенин текшериңиз.
  • Verify that the bulbs are correctly screwed into their sockets and are not faulty. Try testing with a known working bulb.
  • Inspect electrical connections for any loose wires (ensure power is off before checking).
• Жарык жыпылыктайт же күңүрт:
  • If using a dimmer, ensure that the bulbs are specifically rated as dimmable and are compatible with your dimmer switch.
  • Лампалар бекем буралып бекитилгенин текшериңиз.
  • жалпы ват камсыз кылууtage of the bulbs does not exceed the dimmer's capacity.
• Адаттан тыш ызы-чуу же жыт:
  • Immediately turn off the power supply at the circuit breaker.
  • Do not attempt to operate the light. Contact a qualified electrician for inspection.

If these steps do not resolve the issue, please contact customer support or a qualified electrician.

Техникалык шарттар

Кепилдик жана колдоо

For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer directly. Warranty terms may vary by region and retailer.

For technical assistance or further inquiries, please contact the manufacturer, Rabalux, or your point of purchase. Ensure you have your model number (5421) and proof of purchase available when seeking support.