1. Киришүү
The VIKING MTG-10 Multi-Tone Generator is a versatile audio device designed to provide various tones for paging systems, background music, and alert applications. It offers 10 distinct siren, warble, and chime tones, with priority override capabilities for siren and evacuation loops. The unit can also be configured to provide a periodic tone to indicate call recording. This manual provides essential information for the proper setup, operation, and maintenance of your MTG-10.
2. Өзгөчөлүктөрү
- Provides 10 different siren, warble, and chime tones.
- Designed for connection to a paging source.
- Offers phone system paging support and background music capabilities.
- Siren and evacuation loop tones have priority override.
- Configurable to provide a tone every 15 seconds for call recording notification.
- Компакт жана бышык дизайн.
3. Продукт бүтүп калдыview and Label Diagram
This image displays the product label for the VIKING MTG-10 Multi-Tone Generator. The label clearly indicates the wiring terminals: OUTPUT - (pin 10), OUTPUT + (pin 9), INPUT - (pin 8), INPUT + (pin 7), and SELECT COM (pin 6). Below these, pins 1 through 5 are designated for 'TONE SELECTION'. The label also includes the manufacturer's name and address: Viking Electronics, Inc., Hudson, WI 54016.
Terminal and Pin Designations:
| Pin номери | Белги | Description |
|---|---|---|
| 10 | OUTPUT - | Negative audio output terminal. |
| 9 | OUTPUT + | Positive audio output terminal. |
| 8 | INPUT - | Negative audio input terminal. |
| 7 | INPUT + | Positive audio input terminal. |
| 6 | SELECT COM | Common pin for tone selection. |
| 1-5 | ТОНУН ТАНДОО | Pins used in combination with SELECT COM (pin 6) to select desired tone. |
4. Орнотуу жана орнотуу
Before installation, ensure the power source is disconnected from any connected audio equipment. The MTG-10 should be installed in a dry, protected environment. Refer to the product label diagram in Section 3 for terminal identification.
- Зымдарды киргизүү: Connect your audio source (e.g., paging system output) to the INPUT + (pin 7) and INPUT - (pin 8) terminals.
- Wiring Output: Connect the MTG-10's audio output to your amplifier or speaker system using the OUTPUT + (pin 9) and OUTPUT - (pin 10) terminals.
- Кубат туташуу: The MTG-10 typically draws power from the connected audio system or requires a separate low-voltage DC power supply (not included). Consult the full installation guide for specific power requirements and connections.
- Tone Selection Wiring: For tone selection, connect the SELECT COM (pin 6) to the appropriate TONE SELECTION pins (1-5) as detailed in Section 5 to achieve the desired tone.
- Сыноо: After all connections are made, apply power and test the system to ensure proper functionality and tone output.
5. Operation and Tone Selection
The MTG-10 operates by receiving an audio input and generating a selected tone at its output. The primary operational aspect is the selection of the desired tone.
Tone Selection Method:
The MTG-10 offers 10 distinct tones, including various siren, warble, and chime sounds. These tones are selected by making specific connections between the SELECT COM (pin 6) and the TONE SELECTION pins (1-5). The exact combination for each tone is typically provided in the detailed wiring diagram or installation manual that accompanies the product. Users should refer to that specific documentation for precise tone mapping.
Generally, connecting one or more of pins 1-5 to pin 6 (SELECT COM) will activate a specific tone. For exampле:
- Connecting Pin 1 to SELECT COM might produce a standard chime.
- Connecting Pin 2 to SELECT COM might produce a warble tone.
- Combinations of pins (e.g., Pin 1 and Pin 3 to SELECT COM) may produce other unique tones.
The device also supports priority override for siren and evacuation tones, ensuring critical alerts are heard. The 15-second recording notification tone is a configurable feature, which can be enabled or disabled based on system requirements.
6. Техникалык шарттар
| Өзгөчөлүк | Нарк |
|---|---|
| Модель номери | МТГ-10 |
| Бренд | VIKING |
| Продукциянын өлчөмдөрү (L x W x Y) | 1 x 2.1 x 2.9 дюйм |
| Элемент Салмагы | 1 фунт |
| Өндүрүүчү | Capitol Sales Company |
| Tones Provided | 10 (Siren, Warble, Chime) |
7. Кыйынчылыктарды
If you encounter issues with your MTG-10, consider the following common troubleshooting steps:
- No Tone Output:
- Verify all wiring connections (Input, Output, Power, Tone Selection) are secure and correct.
- Ensure the MTG-10 is receiving adequate power.
- Check the connected amplifier/speaker system for proper operation.
- Incorrect Tone Output:
- Review your tone selection wiring (Pins 1-5 to SELECT COM Pin 6) against the detailed wiring diagram for the desired tone.
- Ensure no unintended pins are shorted.
- Үзгүлтүксүз иштөө:
- Бошоң байланыштарды же бузулган зымдарды текшериңиз.
- Ensure the operating environment is stable and free from excessive heat or moisture.
If problems persist, contact VIKING technical support for further assistance.
8. Техникалык тейлөө
The VIKING MTG-10 Multi-Tone Generator is designed for reliable, long-term operation with minimal maintenance. Follow these guidelines:
- Тазалоо: Түзмөктүн сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Катуу химиялык заттарды, эриткичтерди же абразивдүү тазалоочу каражаттарды колдонуудан алыс болуңуз.
- Курчап турган чөйрө: Ensure the unit is kept in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust or moisture.
- Байланыштары: Бардык зымдардын туташууларынын бекемдигин камсыз кылуу үчүн мезгил-мезгили менен текшерип туруңуз.
No user-serviceable parts are inside the unit. Do not attempt to open or repair the device yourself, as this may void the warranty.
9. Кепилдик жана колдоо
VIKING products are manufactured to high standards and are typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIKING Electronics webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
For technical support, troubleshooting assistance, or service inquiries, please contact VIKING Electronics customer service. Contact information can usually be found on the manufacturer's webсайтында же продуктунун таңгагында.
VIKING Electronics, Inc.
Хадсон, WI 54016
www.vikingelectronics.com (Чыгampле шилтеме, чындыгын текшерүү webсайт)
