Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your First Alert Bark Genie Automatic Bark Control Device. Please read this manual thoroughly before using the device to ensure safe and effective operation.
The First Alert Bark Genie Automatic Bark Control Device is designed to deter excessive barking in dogs by emitting a safe, ultrasonic sound that is audible only to dogs. This device can be used both indoors and outdoors.
Коопсуздук маалыматы
- This device is intended for use with dogs only.
- Балдар жетпеген жерде сактаңыз.
- Do not immerse the device in water. While weatherproof, it is not designed for submersion.
- The ultrasonic sound is generally harmless to humans and most animals, but prolonged exposure at close range may be uncomfortable for some individuals.
- The effectiveness of the ultrasonic sound correction may vary among individual dogs. Some dogs may not respond to the device.
- Ensure the device is placed in a location where the ultrasonic sound can effectively reach the dog without obstruction.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- First Alert Bark Genie Automatic Bark Control Device (Model FABCU1G)
- Колдонуучунун Колдонмосу (бул документ)
- (Battery not included, typically requires one 9-volt battery)
Жайгашуу
1. Аппаратты кубаттоо
The Bark Genie device operates on a 9-volt battery (not included). To install the battery:
- Locate the battery compartment cover on the back or bottom of the device.
- Бөлүмдүн капкагын ачыңыз.
- Insert a fresh 9-volt alkaline battery, ensuring correct polarity (+/-).
- Батарея уясынын капкагын бекем жабыңыз.
Alternatively, an AC adapter (not included) can be used for continuous power. Refer to the manufacturer's recommendations for compatible AC adapters.
2. Жайгаштыруу
Optimal placement is crucial for the device's effectiveness. Consider the following:
- Place the device within 50 feet of the area where your dog typically barks excessively.
- Ensure the front of the device, where the ultrasonic emitter is located, faces the dog and is not obstructed by furniture, walls, or dense foliage.
- For outdoor use, place the device in a location protected from direct heavy rain or extreme weather, despite its weatherproof design.
- The device can be placed on a flat surface, mounted on a wall, or hung using the integrated handle.
Image: The First Alert Bark Genie Automatic Bark Control Device placed on a wooden table, demonstrating typical indoor placement. A dog is visible in the background, out of focus.
Image: The First Alert Bark Genie Automatic Bark Control Device attached to a wooden fence post in an outdoor setting, illustrating outdoor placement options.
Иштөө нускамалары
1. Сезимталдуулуктун деңгээлин жөндөө
The device features 3 adjustable levels of sensitivity to detect barking. A higher sensitivity setting means the device will trigger more easily with softer or more distant barks.
- Locate the sensitivity switch or dial on the device.
- Select the desired sensitivity level:
- Төмөн: For loud barks or close proximity.
- Орточо: Standard setting for most situations.
- Жогорку: For softer barks or greater distance.
- Test the setting by having your dog bark (or simulating a bark) to ensure the device responds appropriately. A small indicator light may flash when the ultrasonic sound is emitted.
Сүрөт: Жакын пландагы фронт view of the First Alert Bark Genie device, highlighting the ultrasonic emitter and microphone for bark detection.
2. Операция
Once powered and placed, the device operates automatically:
- When the device detects barking within its range and sensitivity setting, it will emit a high-frequency ultrasonic sound.
- This sound is designed to be startling and unpleasant to dogs, interrupting their barking behavior.
- The sound is typically inaudible to humans.
- The device will stop emitting the sound once the barking ceases.
Note: Consistency is key. For best results, ensure the device is always active when you wish to deter barking.
Техникалык тейлөө
1. Тазалоо
- Аппаратты жумшак, кургак чүпүрөк менен аарчыңыз.
- Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар пластилинге зыян келтириши мүмкүнasing же ички компоненттер.
- Ensure the microphone and ultrasonic emitter are free from dust or debris for optimal performance.
2. Батареяны алмаштыруу
Replace the 9-volt battery when the device's performance diminishes or if the indicator light (if present) suggests low battery. Follow the battery installation steps in the "Setup" section.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Device does not activate when dog barks. |
|
|
| Device activates too frequently or without barking. |
|
|
| Dog does not respond to the device. |
|
|
Техникалык шарттар
- Модел: FABCU1G
- Бренд: Биринчи эскертүү
- Өлчөмдөрү (LxWxH): 6 x 3.75 x 7 дюйм (болжолдуу, продукт өлчөмдөрү негизинде)
- Салмагы: 0.69 Pounds (approximate, without battery)
- Материал: Пластик
- Кубат булагы: 9-volt battery (not included) or compatible AC adapter (not included)
- Натыйжалуу колому: Up to 50 feet (approximate)
- Сезимталдуулук деңгээли: 3 жөнгө салынуучу деңгээл
- Аба ырайынын туруктуулугу: Weatherproof (not submersible)
Кепилдик жана колдоо
For warranty information or technical support, please refer to the contact information provided with your purchase documentation or visit the official First Alert webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
For additional assistance, you may contact First Alert customer service.
