MICHELIN 8526 Stealth Ultra Windshield Wiper Blade Instruction Manual

Introduction

The MICHELIN Stealth Ultra Windshield Wiper Blade is engineered to provide superior performance and clear visibility in all weather conditions. Its patented design covers more windshield shapes, ensuring effective wiping across the entire blade. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your wiper blades.

Продукт бүттүview

The Stealth Ultra Wiper Blade incorporates advanced technology for enhanced windshield clearing:

• Smart Hinge Joints: Allow the wiper to grip the windshield securely across the entire blade.
• Patented Smart Hinge Cover: Protects the blade from getting clogged with snow, ice, and debris.
• Көз карандысыз токтотуу: Blade ends have independent suspension to adjust to your windshield’s shape, ensuring secure grip to ends of blade. Multi pressure point surface contact for better wipes and improved vision.
• EZ-Lok Connector System: Designed for quick and easy replacement.
• Туруктуу аткаруу: Independent tests show after 300,000 wipe cycles Michelin Stealth Ultra wipers outperform all industry competitors.
• Water Repellent Silicone Element: Builds a water repellent barrier so water beads off your windshield.

Орнотуу

Follow these steps to properly install your MICHELIN 8526 Stealth Ultra Windshield Wiper Blade:

1. Prepare the Wiper Arm: Lift the wiper arm away from the windshield until it locks into the upright position. If your vehicle requires a service position for wipers, consult your vehicle's owner's manual.
2. Эски тазалагыч бычакты алып салуу: Locate the release tab or button on the old wiper blade's connector. Press it and slide the old blade off the wiper arm.
3. Identify Adapter Type: The MICHELIN Stealth Ultra blade comes with a pre-installed EZ-Lok connector. Ensure it matches your vehicle's wiper arm type (e.g., J-hook, Pinch Tab). If a different adapter is needed, refer to the instructions provided with the blade for adapter replacement.
4. Жаңы тазалагыч бычакты орнотуу: Align the EZ-Lok connector on the new MICHELIN Stealth Ultra blade with the wiper arm. Slide the blade onto the arm until you hear a click, indicating it is securely locked in place. Gently tug on the blade to confirm it is properly fastened.
5. Коргоочу капкагын алып салуу: Carefully remove the yellow plastic squeegee cover from the blade.
6. Төмөнкү тазалагыч колу: Gently lower the wiper arm back onto the windshield.

Орнотуу видеосу

Иштөө нускамалары

To ensure optimal performance and activate the water-repellent properties of your MICHELIN Stealth Ultra Wiper Blades:

1. Таза алдыңкы айнек: Ensure your windshield is clean before activation.
2. Activate Water Repellency: Turn on the wiper blades and wipe at medium speed for 2 to 3 minutes. This process helps to spread the silicone element, creating a water-repellent barrier on your windshield.
3. Wet Weather Conditions: In wet weather, simply run the wipers across the windshield.
4. Dry Weather Conditions: In dry weather, apply water or washer fluid to the windshield intermittently throughout the activation period.

Техникалык тейлөө

Regular maintenance ensures the longevity and effectiveness of your wiper blades:

• Чачтарды үзгүлтүксүз тазалоо: Жарнак менен тазалагычтын резина четин сүртүңүзamp кирди жана кирди кетирүү үчүн кездеме.
• Зыянды текшерүү: Periodically check the blades for cracks, tears, or hardening of the rubber. Replace immediately if any damage is observed.
• Катуу химиялык заттардан алыс болуңуз: Do not use harsh chemicals or abrasive cleaners on the wiper blades or windshield, as this can degrade the rubber and water-repellent coating.

Проблемаларды чечүү

Эгерде сизде шыпыргычтарыңызда көйгөйлөр пайда болсо, төмөндөгүлөрдү карап көрүңүз:

• Streaking, Chattering, Smearing, Squeaking: These are common signs of wear or contamination. Clean the blades and windshield thoroughly. If the issue persists, the blades may need replacement.
• Толук эмес тазалоо: Ensure the blade is securely attached to the wiper arm. The independent suspension and smart hinge design should allow the blade to conform to the windshield. If not, check for proper installation or blade damage.
• Blade Coming Loose: Verify that the EZ-Lok connector clicked into place during installation. A secure click is essential for proper fastening.

Техникалык шарттар

Кепилдик жана колдоо

This MICHELIN product is covered by the manufacturer's standard warranty. For detailed warranty information, product support, or to explore other MICHELIN products, please visit the official MICHELIN Store on Amazon or contact customer service.

MICHELIN Store: Visit the MICHELIN Store