Introduction
This instruction manual provides essential information for the proper installation, operation, and maintenance of your HYUNDAI Genuine 58101-2WA00 Front Disc Brake Pad Kit. This kit contains authentic Original Equipment Manufacturer (OEM) parts designed specifically for your Hyundai vehicle, ensuring optimal performance and fitment. Please read this manual thoroughly before proceeding with any installation or maintenance.
Продукт бүттүview
The HYUNDAI Genuine 58101-2WA00 Front Disc Brake Pad Kit includes a set of front disc brake pads manufactured to Hyundai's exact specifications. These pads are critical components of your vehicle's braking system, designed to provide reliable stopping power and consistent performance. Using genuine OEM parts helps maintain the integrity and safety of your vehicle.
Сүрөт: Four individual brake pads from the HYUNDAI Genuine 58101-2WA00 Front Disc Brake Pad Kit. Two pads are shown with their metal backing plates and shims visible, indicating the side that contacts the caliper piston. The other two pads display their friction material surfaces, which engage with the brake rotor. The pads are dark gray and black, with the friction material having a textured, worn appearance, typical of new brake pads designed for optimal grip.
Орнотуу нускамалары
Installation of brake components requires specialized tools and knowledge. It is highly recommended that this brake pad kit be installed by a qualified automotive technician. Improper installation can lead to brake system failure, resulting in serious injury or death.
General Steps (for reference only; consult a professional service manual):
- Биринчи коопсуздук: Ensure the vehicle is securely lifted and supported on jack stands. Disconnect the battery.
- Дөңгөлөктү алып салуу: Remove the front wheels to access the brake calipers.
- Калиперди алып салуу: Carefully unbolt and remove the brake caliper, ensuring not to strain the brake hose. Support the caliper to prevent damage.
- Эски пластинканы алып салуу: Эски тормоздук кронштейндерди калипер кронштейнинен алып салыңыз. Алардын багытын белгиле.
- Калипердин поршенин тартуу: Use a suitable tool to retract the caliper piston(s) slowly and evenly.
- Жаңы Pad орнотуу: Install the new HYUNDAI Genuine brake pads into the caliper bracket, ensuring proper fitment and orientation. Apply brake lubricant to contact points as specified by the service manual.
- Калиперди кайра орнотуу: Reinstall the brake caliper, ensuring all bolts are torqued to manufacturer specifications.
- Суюктукту текшерүү: Check the brake fluid reservoir level and top up if necessary.
- Bleeding (if necessary): If the brake system was opened, bleeding will be required.
- Акыркы текшерүүлөр: Reinstall wheels, lower the vehicle, and pump the brake pedal several times to seat the pads against the rotor before driving.
Always refer to your vehicle's specific service manual for detailed, model-specific instructions and torque specifications.
Сиздин жаңы тормоздук колодкаларды иштетүү
After installation, a proper "break-in" or "bedding-in" procedure is crucial for optimal brake performance and longevity. This process helps transfer a layer of friction material from the pads to the rotors, ensuring even contact and reducing noise.
Кирүү тартиби:
- Avoid hard braking for the first 200-300 miles (320-480 km) after installation.
- Perform several moderate stops from approximately 30 mph (50 km/h) down to 5 mph (8 km/h), allowing a few seconds between stops for the brakes to cool slightly. Do not come to a complete stop during this process.
- After these moderate stops, drive for several minutes without braking to allow the brakes to cool completely.
- Бул процессти 2-3 жолу кайталаңыз.
- During the break-in period, you may notice a slight odor or reduced braking performance. This is normal.
Following this procedure will ensure your new brake pads perform as intended.
Техникалык тейлөө
Regular inspection of your brake pads and system is essential for safety and performance. It is recommended to have your brake system inspected at least once a year or every 10,000-12,000 miles (16,000-19,000 km), or as specified by your vehicle's maintenance schedule.
- Төшөк кийими: Check the thickness of the friction material. Replace pads when they reach their minimum specified thickness (typically 2-3mm).
- Ротордун абалы: Inspect brake rotors for excessive wear, scoring, or warping.
- Тормоз суюктугу: Ensure brake fluid is at the correct level and is clean. Contaminated or low fluid can indicate issues.
- Калибрдин иштеши: Verify that calipers are moving freely and not sticking.
- Ызы-чуу: Address any unusual noises promptly.
Проблемаларды чечүү
If you experience any issues with your brake pads, consult a qualified technician. Common issues and potential causes include:
- Чыйылдаган же кычыраган үн:
- Чыйылдап: Often caused by vibration between the pad and caliper, improper installation, lack of anti-squeal shims/lubricant, or improper break-in.
- Майдалоо: Typically indicates severe pad wear, where the metal backing plate is contacting the rotor. This requires immediate attention and replacement.
- Төмөндөтүлгөн тормоздук көрсөткүч:
- Can be due to improper break-in, contaminated pads, air in the brake lines, or issues with other brake system components.
- Вибрация же пульсация:
- Often indicates warped brake rotors, which should be inspected and replaced if necessary.
Do not attempt to diagnose or repair complex brake issues without proper training and tools. Always prioritize safety.
Техникалык шарттар
| Бөлүмдүн номери | 58101-2WA00 |
| Бренд | HYUNDAI Genuine |
| Auto Part Position | Фронт |
| Унаа кызматынын түрү | Машина |
| Specification Met | OEM |
| Элемент Салмагы | 4.4 фунт (болжол менен) |
| Пакеттин өлчөмдөрү | 6.7 x 3.4 x 3.3 дюйм (болжол менен) |
Кепилдик жана колдоо
As a genuine Original Equipment Manufacturer (OEM) part, this product is backed by Hyundai's standard warranty for genuine parts. For specific warranty terms, conditions, and duration, please refer to your vehicle's warranty documentation or contact an authorized Hyundai dealership or service center. For technical support or inquiries regarding this specific part, please contact your local Hyundai service department or the point of purchase.
Эскертүү: Use of non-genuine parts or improper installation may void your vehicle's warranty.
