EGLO 86996A Nikita Wall or Ceiling Light Instruction Manual

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO 86996A Nikita Wall or Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

The EGLO Nikita light fixture features a transitional design with a matte nickel finish and satin glass accents, suitable for both wall and ceiling mounting.

Маанилүү коопсуздук маалыматы

ЭСКЕРТҮҮ: Электр шок коркунучу. Орнотуудан же тейлөөдөн мурун сактагычтын же автоматтык өчүргүчтүн кубатын өчүрүңүз.

Always consult a qualified electrician if you are unsure about the installation process. Ensure all wiring connections are secure and comply with local electrical codes.

Бул продукт ички колдонуу үчүн гана иштелип чыккан. Нымдуулукка же экстремалдык температурага дуушар кылбаңыз.

Сунуш 65 Эскертүү: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please check your local laws before purchasing бул продукт.

Кутуда эмне бар

• Light Fixture (EGLO 86996A Nikita)
• Installation Hardware (screws, wire nuts, mounting bracket) - (Standard components, may vary slightly)
• Instruction Manual

Эскертүү: 1x100W Halogen bulb is камтылган эмес жана өзүнчө сатып алуу керек.

Орнотуу жана орнотуу

This section outlines the general steps for installing the EGLO 86996A light fixture. Specific details may vary based on your electrical box and mounting surface. Always ensure power is OFF before beginning installation.

Керектүү куралдар (камтылган эмес):

• Бурагыч (Phillips жана/же Flathead)
• Wire Strippers
• Кычкач
• Электр лентасы
• Коопсуздук көз айнек

Орнотуу кадамдары:

1. Кубатты өчүрүү: Locate the circuit breaker or fuse box that supplies power to the installation location. Turn off the power completely. Verify power is off using a voltage сыноочу.
2. Монтаждоо бетин даярдоо: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
3. Монтаждык кронштейнди тиркөө: Secure the fixture's mounting bracket to the electrical box using the provided screws. Ensure it is firmly attached.
4. Электр байланыштарын жасоо:
   • туташтыруу жашыл же жылаңач жез жер зым from the fixture to the ground wire from the electrical box (usually bare copper or green). Secure with a wire nut.
   • туташтыруу ак зым from the fixture to the white (neutral) wire from the electrical box. Secure with a wire nut.
   • туташтыруу кара зым from the fixture to the black (hot) wire from the electrical box. Secure with a wire nut.

   Ensure all wire nuts are tightly secured and no bare wire is exposed. Wrap connections with electrical tape for added security.
5. Арматураны орнотуу: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall or ceiling.
6. Лампаны орнотуу: Insert one 100W Halogen bulb (not included) into the socket. Do not exceed the maximum wattage.
7. Күчтү калыбына келтирүү: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker or fuse box.

Сүрөт: алдыңкы view of the EGLO 86996A Nikita Wall or Ceiling Light in matte nickel finish.

Image: The EGLO 86996A Nikita light fixture mounted on a blue wall, illustrating its up/down lighting effect.

Image: The EGLO 86996A Nikita light fixture integrated into a modern living room, demonstrating its aesthetic appeal.

Image: Dimensional drawing of the EGLO 86996A Nikita light, showing length (8.86"), width (3.15"), and height (4.92").

Операция

The EGLO 86996A Nikita light fixture operates via a standard wall switch (not included) connected to your household electrical system. It is designed for 120 Volts AC power.

• Күйгүзүү/өчүрүү: Жарык бергичти күйгүзүү же өчүрүү үчүн дубалга орнотулган өчүргүчтү колдонуңуз.
• Лампочканын түрү: This fixture requires one 100W Halogen bulb (not included). Halogen bulbs can generate significant heat.
• Өчүрүүчү: The fixture is dimmable if connected to a compatible dimmer switch and using dimmable halogen bulbs.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин лампаңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.

• Тазалоо: Before cleaning, ensure the power is turned off and the fixture has cooled down. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Лампаны алмаштыруу:
  1. Автоматтык өчүргүчтөгү лампага берилүүчү электр кубатын өчүрүңүз.
  2. Лампага тийгенге чейин толугу менен муздаганга мүмкүнчүлүк бериңиз.
  3. Carefully remove the old bulb.
  4. Insert a new 100W Halogen bulb. Avoid touching the new halogen bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or glove.
  5. Күчтү калыбына келтириңиз.
• Текшерүү: Periodically check for any loose wiring or damaged components. If any damage is found, discontinue use and consult a qualified electrician.

Проблемаларды чечүү

If you encounter issues with your EGLO 86996A light fixture, refer to the following common troubleshooting steps:

Эгерде бул кадамдар маселени чечпесе, кардарларды колдоо кызматына же квалификациялуу электрикке кайрылыңыз.

Техникалык шарттар

Кепилдик маалымат

This product comes with a Manufacturer's Warranty. For specific details regarding coverage, duration, and claims process, please refer to the warranty documentation included with your purchase or contact EGLO customer support directly.

Кардарларды колдоо

For further assistance, technical support, or inquiries regarding your EGLO 86996A Nikita Wall or Ceiling Light, please contact EGLO customer service.

You can often find contact information on the EGLO official webсайт же сатуучу аркылуу.

Онлайн ресурстар: Visit the EGLO Store on Amazon

Продукт видеосу