Magnum MMS912E Inverter/Charger Instruction Manual

Продукт бүттүview

The Magnum MMS912E Inverter/Charger is a pure sine wave inverter designed for smaller power requirements. It integrates an inverter and a 40 Amp Power Factor Corrected (PFC) charger. This unit is versatile, lightweight, and provides a reliable foundation for energy systems. The built-in PFC charger optimizes energy consumption from a generator, using 25-30% less AC current compared to standard chargers. The MMS912E is CE listed, ensuring safety and reliability. Its design features an hourglass case and a die-cast aluminum base, which also functions as a heat sink for enhanced high-temperature operation.

Figure 1: The Magnum MMS912E Inverter/Charger. This image displays the overall appearance of the unit, highlighting its compact design and the prominent Magnum Energy branding.

Негизги өзгөчөлүктөрү

• Таза синус толкунунун чыгышы: Сезимтал электроникага ылайыктуу таза жана туруктуу AC кубатын камсыз кылат.
• Integrated PFC Charger: 40 Amp Power Factor Corrected charger for efficient battery charging, reducing generator AC current draw by 25-30%.
• Стандарт 20 Amp Transfer Relay: Automatically passes AC power through the inverter when connected to shore power or a generator.
• Low/High Battery Protection: Safeguards batteries from over-discharge or over-charge.
• Учурдагы ашыкча жүктөн коргоо: Protects the unit and connected devices from excessive current.
• Батареянын температурасы сенсору: Ensures optimal charging by adjusting charge parameters based on battery temperature.
• CE тизмесине киргизилген: Complies with stringent European safety requirements.
• Туруктуу курулуш: Die-cast aluminum base acts as a heat sink for superior high-temperature operation.

Коопсуздук маалыматы

Read all instructions and warnings before installing or operating this inverter/charger. Failure to follow these instructions may result in electric shock, fire, severe injury, or death. Keep this manual for future reference.

• Орнотуу бардык тиешелүү электр эрежелерине ылайык квалификациялуу адистер тарабынан жүргүзүлүшү керек.
• Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында туура желдетүүнү камсыз кылыңыз.
• Do not expose the unit to water, rain, or excessive moisture.
• Disconnect all power sources before performing any maintenance or wiring.
• Use appropriate wire gauges and fusing for all connections.
• Агрегатты иштетпеңиз, эгерде ал кандайдыр бир жол менен бузулса.

Орнотуу жана орнотуу

1. Таңгактан чыгаруу жана текшерүү

Carefully unpack the MMS912E Inverter/Charger and inspect it for any shipping damage. Report any damage to your dealer immediately. Retain the packaging materials for future transport.

2. Монтаждоо орду

Select a mounting location that is:

• Dry and protected from moisture.
• Жылуулуктун таркашына мүмкүндүк берүү үчүн жакшы желдетилген.
• Зымдарды туташтыруу жана техникалык тейлөө үчүн жеткиликтүү.
• Close to the battery bank to minimize DC cable length and voltagд тамчы.
• Away from flammable materials or gases.

Mount the unit securely to a solid surface using appropriate fasteners. Ensure the unit is mounted in a position that allows for proper airflow around its heat sink fins.

3. Зымдарды туташтыруу

All wiring must comply with local and national electrical codes. It is recommended that a qualified electrician perform the installation.

1. DC Battery Connections: Connect the positive (+) and negative (-) terminals of the inverter to the battery bank. Use appropriately sized, high-quality DC cables to minimize voltage drop. Ensure proper polarity. Install a DC disconnect switch and fuse/breaker between the inverter and the battery bank.
2. AC Input Connection (Shore/Generator Power): Connect the AC input from your shore power or generator to the designated AC input terminals on the inverter. This connection allows the internal charger to charge batteries and the transfer relay to pass AC power through.
3. AC чыгаруу туташуусу (жүктөөлөр): Connect your AC loads (appliances, outlets) to the AC output terminals of the inverter.
4. Негиздөө: Properly ground the inverter chassis to a reliable earth ground.
5. Battery Temperature Sensor (BTS): Connect the included battery temperature sensor to the designated port on the inverter and attach the sensor to the side of a battery in the battery bank. This ensures accurate temperature compensation for charging.

Маанилүү: Double-check all wiring connections for tightness and correct polarity before applying power. Loose connections can cause overheating and damage.

Иштөө нускамалары

1. Баштапкы ишке киргизүү

1. Ensure all wiring is complete and secure.
2. Turn on the DC disconnect switch between the inverter and the battery bank.
3. Observe the indicator lights on the inverter. Refer to the LED indicator section for status meanings.
4. If connecting to shore power or a generator, apply AC input power. The inverter's transfer relay will engage, and the charger will begin if batteries require charging.
5. Turn on the AC output breaker/switch to power your loads.

2. Inverter Mode

When no AC input power is present (e.g., shore power disconnected, generator off), the MMS912E will automatically switch to inverter mode, drawing power from the battery bank and converting it to 120V AC power for your connected loads.

3. Заряддоо режими

When a valid AC input source (shore power or generator) is connected, the MMS912E will enter charger mode. It will prioritize passing AC power directly to your loads via the transfer relay and simultaneously charge the battery bank using its integrated PFC charger. The charger automatically adjusts its output based on battery state of charge and temperature (if BTS is connected).

4. Transfer Relay Operation

The built-in 20 amp transfer relay automatically switches between inverter power and incoming AC utility/generator power. This transition is typically seamless, ensuring continuous power to your loads.

Техникалык тейлөө

The Magnum MMS912E Inverter/Charger is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance and longevity.

• Ай сайын:
  • Inspect all wiring connections for tightness. Loose connections can cause resistance and heat.
  • Check for any signs of corrosion on battery terminals and clean if necessary.
  • Желдетүү тешиктери чаңдан жана таштандылардан тазаланганын текшериңиз.
• Жыл сайын:
  • Perform a thorough visual inspection of the unit for any physical damage.
  • Verify battery health and water levels (for flooded lead-acid batteries).
  • Test the functionality of the inverter and charger modes.

Абайлаңыз: Always disconnect all power sources (DC and AC) before performing any maintenance or cleaning on the unit.

Проблемаларды чечүү

This section provides solutions to common issues. If the problem persists, contact Magnum Energy technical support.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалымат

This product comes with a 30-day warranty from Meeker Industries, Inc. The customer is responsible for all return shipping costs for warranty claims within this period. After 30 days, customers should contact the manufacturer, Magnum Energy, directly for service and information regarding their warranty policies.

Эскертүү: Warranty terms may vary. Please refer to the official Magnum Energy website or contact their customer service for the most current and detailed warranty information.

Кардарларды колдоо

For technical assistance, troubleshooting beyond this manual, or warranty inquiries after the initial 30-day period, please contact Magnum Energy customer support. Contact details can typically be found on the manufacturer's official webсайт.

Өндүрүүчү: Magnum Energy

For the most up-to-date contact information, please visit the official Magnum Energy webсайт.