ACI 372693

ACI 372693 Алдыңкы айнек жуугуч насостун колдонуучу колдонмосу

Модель: 372693

Продукт бүттүview

The ACI 372693 Windshield Washer Pump is engineered to match Original Equipment (OE) washer pumps, ensuring compatibility and reliable performance. It is designed to fit the original windshield washer pump location and features an OE style electrical connector for straightforward installation. This pump includes two nozzles for effective windshield cleaning.

ACI 372693 Windshield Washer Pump

Image: ACI 372693 Windshield Washer Pump. This image displays the complete pump unit, showing its main body, electrical connector, and the two integrated nozzles.

Негизги өзгөчөлүктөрү

  • Engineered to match Original Equipment washer pumps.
  • Designed for direct fit to original windshield washer pump systems.
  • Features an OE style electrical connector for secure attachment.
  • Equipped with two nozzles for efficient fluid delivery.

Орнотуу (Орнотуу)

Installation of the ACI 372693 Windshield Washer Pump typically involves replacing an existing pump. While specific steps may vary by vehicle model, the general procedure includes:

  1. Биринчи коопсуздук: Жумушту баштоодон мурун, унаанын от алдыруу системасы өчүрүлгөндүгүн жана аккумулятордун ажыратылгандыгын текшериңиз.
  2. Locate the Washer Reservoir: The windshield washer pump is usually located at the bottom of the washer fluid reservoir. Access may require removing a wheel well liner or other components depending on the vehicle.
  3. Дренаждык суюктук: Мүмкүн болсо, насосту алып салуу учурунда төгүлүп кетүү коркунучун азайтуу үчүн, шайба суюктугун резервуардан төгүп салыңыз.
  4. Электр туташтыргычын ажыратыңыз: Carefully disconnect the electrical connector from the old pump.
  5. Шлангдарды алып салуу: Disconnect the washer fluid hoses from the old pump. Be prepared for some fluid to leak.
  6. Эски насосту алып салуу: The pump is typically held in place by a rubber grommet. Gently pull or twist the old pump out of the reservoir. Ensure the old grommet is removed and replaced with a new one if necessary (note: a new grommet may not be included with this product).
  7. Жаңы насосту орнотуу: Insert the new ACI 372693 pump into the reservoir, ensuring a snug fit with the grommet.
  8. Reconnect Hoses and Electrical: Reattach the washer fluid hoses and the electrical connector to the new pump.
  9. Refill Reservoir and Test: Refill the washer fluid reservoir and reconnect the battery. Test the washer system to ensure proper operation and check for leaks.

Note: Professional installation is recommended if you are unfamiliar with automotive repair procedures. Always refer to your vehicle's specific service manual for detailed instructions.

Иштөө нускамалары

The ACI 372693 Windshield Washer Pump operates as part of your vehicle's existing windshield washer system. Its function is to pump washer fluid from the reservoir to the windshield nozzles when activated.

  • Жандандыруу: The pump is activated by the vehicle's windshield washer stalk or button, typically located on the steering column.
  • Fluid Delivery: Upon activation, the pump draws fluid from the reservoir and propels it through the hoses to the windshield nozzles, allowing for cleaning.
  • Wiper Operation: In most vehicles, activating the washer pump will also initiate a few cycles of the windshield wipers to clear the fluid and debris.

Ensure the washer fluid reservoir is adequately filled with appropriate windshield washer fluid, especially in freezing temperatures.

Техникалык тейлөө

The ACI 372693 Windshield Washer Pump is designed for durability and requires minimal maintenance. However, regular checks of the overall washer system are recommended:

  • Суюктуктун деңгээли: Regularly check and refill the windshield washer fluid reservoir. Use high-quality washer fluid suitable for your climate.
  • Соплолорду текшерүү: Periodically check the windshield washer nozzles for clogs or misalignment. Clear any debris with a fine needle if necessary.
  • Hose Integrity: Inspect the washer fluid hoses for cracks, leaks, or kinks that could impede fluid flow.
  • Электр байланыштары: Ensure the electrical connector to the pump remains clean and securely attached.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Washer pump does not operate.
  • Low or empty fluid reservoir.
  • Күйгүзүүчү.
  • Туура эмес электр байланышы.
  • Бузулган насос.
  • Резервуарды кайра толтуруу.
  • Check and replace fuse (refer to vehicle manual).
  • Inspect and secure electrical connector.
  • Replace pump if other solutions fail.
Weak or no fluid spray.
  • Бүктелген саптамалар.
  • Kinked or leaking hoses.
  • Суюктуктун деңгээли төмөн.
  • Системада аба.
  • Clear nozzles with a fine needle.
  • Inspect and repair/replace hoses.
  • Резервуарды кайра толтуруу.
  • Run pump for a few seconds to clear air.
Fluid leaks around pump.
  • Damaged or improperly seated grommet.
  • Шланганы бириктирүү.
  • Ensure pump is fully seated; replace grommet if damaged.
  • Tighten or re-secure hose connections.

Техникалык шарттар

БрендACI
Модель номери372693
Элемент Салмагы4 унция
Продукциянын өлчөмдөрү6.5 x 2.7 x 2.1 дюйм
Өндүрүүчү бөлүгүнүн номери372693
Насадкалар2
Электрдик туташтыргычOE Style

Кепилдик жана колдоо

For information regarding warranty coverage and technical support for your ACI 372693 Windshield Washer Pump, please refer to the official ACI product documentation or contact ACI customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

Байланыш маалыматы:

  • Visit the official ACI webколдоо булактары үчүн сайт.
  • Refer to your purchase receipt or packaging for specific warranty details.

Тектеш документтер - 372693

Preview ACI сериясы кассеталык кондиционерлер үчүн орнотуу колдонмосу
ACI сериясындагы кассеталык кондиционерлерди орнотуу боюнча толук нускамалар, анын ичинде коопсуздук чаралары, монтаждоо өлчөмдөрү жана туташуу процедуралары. ACI-25HRDC1C, ACI-35HRDC1C, ACI-53HRDC1C, ACI-71HRDC1A, ACI-105HRDC3A, ACI-140HRDC3A жана ACI-180HRDC3A сыяктуу моделдерди камтыйт.
Preview ACI каналынын нымдуулук температурасын өткөргүч сериясынын сенсорун орнотуу жана иштетүү
ACI каналдарынын нымдуулук температурасын өткөргүч сериясындагы сенсорлорун (A/TT жана A/RH) орнотуу жана иштетүү боюнча нускамалар. HVAC имаратын башкаруу системалары үчүн жалпы маалыматты, орнотууну, зымдарды, калибрлөөнү, бузулууларды оңдоону жана продуктунун мүнөздөмөлөрүн камтыйт.
Preview ACI BACnet/Modbus Room сериясындагы сенсорлорду орнотуу жана пайдалануу боюнча колдонмо
ACI BACnet MS/TP жана Modbus RTU Room Series температура жана нымдуулук сенсорлорун орнотуу жана иштетүү боюнча кеңири колдонмо. Имараттарды башкаруу системаларынын зымдарын, орнотуусун, конфигурациясын жана мүнөздөмөлөрүн камтыйт.
Preview ACI RR2552 Spread Spectrum Repeater: Орнотуу жана иштетүү боюнча нускамалар
ACI RR2552 Spread Spectrum Repeaterди орнотуу жана иштетүү боюнча кеңири колдонмо, анда орнотуу, тармактын идентификаторун конфигурациялоо, орнотуу, зымдарды орнотуу, көйгөйлөрдү чечүү жана продукттун мүнөздөмөлөрү камтылган.
Preview ACI Mini Adjustable Status Switch сериялары A/MCS-A, A/MSCS-A Орнотуу жана пайдалануу боюнча колдонмо
ACI Mini Adjustable Status Switch сериясын (A/MCS-A, A/MSCS-A) орнотуу жана иштетүү боюнча нускамалар. AC токту көзөмөлдөө үчүн функцияларды, сактык чараларын, орнотууну, зымдарды, калибрлөөнү, бузулууларды оңдоону жана продуктунун мүнөздөмөлөрүн камтыйт.
Preview ACI тоңдургуч сериясындагы сенсорду орнотуу жана иштетүү боюнча нускамалар
ACI Freezer сериясындагы температура сенсорлорун орнотуу, иштетүү жана мүчүлүштүктөрдү оңдоо боюнча комплекстүү колдонмо. Коммерциялык HVAC жана имараттарды башкаруу системалары үчүн продукциянын мүнөздөмөлөрүн, зымдардын схемаларын жана орнотуу боюнча көрсөтмөлөрдү камтыйт.