User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your WAC Lighting EN-2460-RB2 Remote Enclosed Electronic Transformer. This Class 2, UL & cUL listed transformer is designed to provide a reliable 24V output from a 120V input, ideal for various low voltage жарыктандыруу колдонмолору.

Image 1: WAC Lighting EN-2460-RB2 Electronic Transformer

Сураныч, орнотуудан мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.

2. Коопсуздук маалыматы

Always adhere to local electrical codes and regulations. Installation should be performed by a qualified electrician.

• Электр шок коркунучу: Орнотуудан же тейлөөдөн мурун автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• Class 2 Safety: This transformer is a Class 2 device, meaning its output is intrinsically safer, limiting current to no greater than 5 amps per compartment.
• UL & cUL Listed: Certified for damp locations, ensuring safety and compliance.
• Сунуш 65 Эскертүү: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
• 60 Вт максималдуу жүктөө кубаттуулугунан ашпаңыз.
• Ensure proper ventilation around the transformer.

3. Продукциянын өзгөчөлүктөрү

• Киргизүү көлөмүtage: 120V AC
• Output Voltage: 24V AC
• Максималдуу жүктөө жөндөмдүүлүгү: 60 Ватт
• Minimum Load Requirement: 1W, supporting low-load LED systems.
• Soft start, short circuit, and overload protection features for enhanced durability and safety.
• Designed for use with WAC Lighting low voltage under cabinet and recessed lighting systems.
• Compatible with electronic low voltage (ELV) dimmers for smooth and continuous dimming.
• Features knockouts on three sides with clips for line voltage зымдары.
• Enclosed electronic transformer, UR (UL ready) component.

4. Орнотуу жана орнотуу

4.1. Зымдарды орнотуу боюнча жалпы көрсөтмөлөр

The enclosure cover is designed for easy removal to facilitate wiring. The transformer includes knockouts on three sides with clips for secure line voltagзымдарды туташтыруу.

• Primary Wiring (Input 120V AC): Connect the 120V AC input to the primary side of the transformer. Ensure all connections are secure and comply with local electrical codes.
• Secondary Wiring (Output 24V AC): For Class 2 transformers, secondary wiring does not require conduit sheathed cable or clamp wiring techniques. Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings, simplifying installation.
• Always use for initial installations to ensure safe and primary side connections within a wiring compartment.

4.2. Караңгылык

This transformer is designed for smooth and continuous dimming when used with an electronic low voltage (ELV) dimmer. It is crucial that dimmers are always installed on the негизги жагы of the transformer (120V input side) to ensure proper operation and prevent damage.

Image 2: Dimensional Drawing of EN-2460-RB2 Transformer (Dimensions: 6" L x 3.25" W x 2.625" H)

5. Иштөө нускамалары

Once properly installed and wired, the transformer will convert the 120V AC input to 24V AC output for your low voltage lighting system. Operation is automatic upon power supply.

• алсыздатуу: If an electronic low voltage (ELV) dimmer is installed on the primary side, you can control the brightness of your connected low voltage lights. Adjust the dimmer to achieve the desired light level.
• жалпы ват камсыз кылууtage of connected fixtures does not exceed the transformer's 60W maximum load capacity and meets the 1W minimum load requirement for optimal performance, especially with LED products.

6. Техникалык тейлөө

The WAC Lighting EN-2460-RB2 transformer is designed for long-term, maintenance-free operation. No user-serviceable parts are inside. For cleaning, ensure power is disconnected and wipe the exterior with a dry, soft cloth. Do not use abrasive cleaners or solvents.

7. Кыйынчылыктарды

If you experience issues with your transformer, please review төмөнкү жалпы көйгөйлөр жана чечимдер:

• Жарык чыгаруусу жок:
  - Verify that the 120V AC input power is active at the primary side of the transformer.
  - Check all wiring connections for looseness or incorrect polarity.
  - Ensure the total load of connected fixtures does not exceed 60W and meets the 1W minimum load.
• Жаркылдаган жарыктар:
  - This can often be caused by an incompatible dimmer or a load that is too low for the dimmer/transformer combination. Ensure you are using an electronic low voltage (ELV) dimmer.
  - Verify the minimum load requirement (1W) is met.
• Dimming Issues (e.g., not dimming smoothly, limited range):
  - Confirm that the dimmer is an ELV type and is installed on the primary (120V) side of the transformer.
  - Some dimmers may require adjustment of their high-end or low-end trim levels. Refer to your dimmer's instruction manual for specific settings.
• Ашыкча жүктөн коргоо иштетилди:
  - If the transformer shuts off, it may be due to an overload. Disconnect some fixtures to reduce the total wattage below 60W and then cycle the power to reset the transformer.

If problems persist after attempting these solutions, contact a qualified electrician or WAC Lighting customer support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

The WAC Lighting EN-2460-RB2 Electronic Transformer comes with a Five (5) year manufacturer limited warranty. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

For warranty claims, technical support, or further assistance, please contact WAC Lighting directly. You can find more information and contact details on the official WAC Lighting webсайты же алардын Amazon дүкөнүнүн баракчасы аркылуу: WAC Lighting Amazon Store.