Introduction
This manual provides essential information for the installation, operation, and maintenance of your WD Black 4TB 7200 RPM SATA 6 Gb/s 64MB Cache, 3.5-Inch Desktop Hard Disk Drive (Model: WD4003FZEX). This high-performance hard drive is designed to enhance your PC experience with its robust architecture and improved data protection features.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Next-generation desktop performance hard drive designed to intensify your PC experience.
- Improved Architectural Designs: Dual Core Processor, High Resolution Controller (HRC), StableTrac Technology.
- Improved Data Protection: Vibration Control Technology (VCT), Corruption Protection Technology (CPT), NoTouch Ramp Load Technology.
- Industry-leading 5-year manufacturer limited warranty.
Продукт бүттүview


The WD Black hard drive is a 3.5-inch form factor device designed for desktop computer systems. It features a SATA 6 Gb/s interface for high-speed data transfer and a 7200 RPM rotational speed for optimal performance. The drive includes a 64MB cache to further enhance data access speeds.
Орнотуу жана орнотуу
Before beginning installation, ensure your computer is powered off and disconnected from the main power supply. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.
Аппараттык орнотуу
- Prepare your computer case: Open your computer case to access the internal drive bays. Identify an available 3.5-inch drive bay.
- Катуу дискти орнотуңуз: Carefully slide the WD Black hard drive into the chosen 3.5-inch drive bay. Secure the drive using screws appropriate for your case. Ensure the drive is firmly mounted to minimize vibrations.
- Маалымат кабелин туташтыруу: Connect one end of a SATA data cable (not included) to the SATA data port on the hard drive. Connect the other end to an available SATA port on your motherboard.
- Электр кабелин туташтыруу: Connect a SATA power cable from your power supply unit (PSU) to the SATA power connector on the hard drive.
- Ишти жабуу: Once all connections are secure, close your computer case.
Software Setup (Initial Use)
After hardware installation, you will need to initialize and format the drive within your operating system.
- Power on your computer: Start your computer and allow it to boot into your operating system (Windows/macOS).
- Access Disk Management (Windows):
- Баштоо баскычын оң баскыч менен чыкылдатып, "Дискти башкаруу" тандаңыз.
- The new drive should appear as "Unallocated Space".
- Right-click on the unallocated space for the new drive and select "Initialize Disk". Choose GPT (GUID Partition Table) for drives larger than 2TB.
- After initialization, right-click the unallocated space again and select "New Simple Volume". Follow the wizard to create a partition, assign a drive letter, and format the drive (NTFS is recommended for Windows).
- Access Disk Utility (macOS):
- Open "Applications" > "Utilities" > "Disk Utility".
- Select the new drive from the sidebar.
- Click "Erase" and choose a format (e.g., APFS or Mac OS Extended (Journaled)) and a scheme (GUID Partition Map).
- Click "Erase" to format the drive.
For detailed instructions, refer to your operating system's documentation or the official WD support webсайт.
Катуу дискти иштетүү
Once installed and formatted, your WD Black hard drive operates like any other storage device in your system. You can use it for storing files, installing applications, or as a secondary drive for large media libraries.
Маалыматтарды өткөрүү
The drive supports SATA 6 Gb/s, providing high data transfer rates. Actual speeds may vary depending on your system's motherboard, SATA controller, and the type of data being transferred. For optimal performance, ensure your motherboard's SATA ports are configured for AHCI mode in the BIOS/UEFI settings.
Power Management
The drive's power consumption varies based on its operational state:
- Окуу жазуу: 9.5 Ватт
- Бекер: 8.1 Ватт
- Standby/Sleep: 1.3 Ватт
Your operating system's power management settings can be configured to put the drive into a low-power state after a period of inactivity, which can help conserve energy and potentially extend drive lifespan.
Техникалык тейлөө
Hard drives are mechanical devices and require minimal user maintenance. However, following these practices can help ensure longevity and data integrity:
- Кадимки камдык көчүрмөлөр: Always back up important data to another storage device or cloud service. No hard drive is immune to failure.
- Туура өчүрүү: Always shut down your computer properly. Avoid sudden power loss, which can lead to data corruption or drive damage.
- Температураны көзөмөлдөө: Ensure adequate airflow within your computer case to prevent the drive from overheating. Operating within recommended temperature ranges (typically 5°C to 60°C) is crucial.
- Вибрацияны көзөмөлдөө: Mount the drive securely to minimize vibrations, which can affect performance and lifespan. The WD Black series includes Vibration Control Technology (VCT) to mitigate this, but proper mounting is still important.
- Дисктин ден соолугун текшерүү: Periodically run disk health checks (e.g., CHKDSK on Windows, First Aid on macOS Disk Utility) to identify and repair minor file система каталары.
Проблемаларды чечүү
If you encounter issues with your WD Black hard drive, consider the following troubleshooting steps:
Диск аныкталган жок
- Кабелдерди текшерүү: Ensure both the SATA data and power cables are securely connected to the drive and the motherboard/PSU. Try different cables if available.
- BIOS/UEFI текшерүү: Enter your computer's BIOS/UEFI settings during startup and verify that the SATA port to which the drive is connected is enabled and that the drive is recognized.
- Электр камсыздоо: Энергия менен камсыздоо блогуңузда (PSU) жетиштүү ват бар экенин текшериңизtage to power all components, including the new hard drive.
- Дискти башкаруу/утилит: As described in the Setup section, check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but uninitialized or unformatted.
Жай аткаруу
- SATA Port: Ensure the drive is connected to a SATA 6 Gb/s (SATA III) port on your motherboard for optimal speed. Older SATA II ports will limit performance.
- AHCI режими: Verify that AHCI mode is enabled in your BIOS/UEFI settings for the SATA controller.
- Бөлүнүү: While less critical with modern file systems, excessive file fragmentation can impact performance. Consider defragmenting the drive (Windows) or ensuring TRIM is enabled for SSDs (not applicable here, but good general knowledge).
- Фондук процесстер: Check for background applications or processes that might be heavily utilizing the drive.
Өзгөчө ызы-чуулар
While some operational noise is normal for mechanical hard drives, loud clicking, grinding, or scraping sounds are indicators of potential drive failure. If you hear such noises, immediately back up any critical data and consider replacing the drive.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | WD4003FZEX |
| Кубаттуулугу | 4 ТБ |
| Айлануу ылдамдыгы | 7200 RPM |
| Кэш | 64 MB |
| Интерфейс | SATA 6 Gb/s (SATA III) |
| Форма фактору | 3.5 дюймдук |
| Data Transfer Rate (Buffer to Host) | 6 Гб/сек |
| Data Transfer Rate (Host to/from Drive Sustained) | 171 Мб/сек |
| Операциялык шок | 30Gs @ 2ms (write); 65Gs @ 2ms (read) |
| Non-operating Shock | 300Gs @ 2ms |
| Idle Acoustics | 29 dBA (average) |
| Акустика издөө | 34 dBA (average) |
| Өлчөмдөр (WxLxH) | 4.000 х 5.787 х 1.028 дюйм / 101.6 х 147.0 х 25.4 мм |
| Салмагы | 1.72 фунт / 0.78 кг |
| Операциялык системанын шайкештиги | Windows/Mac |
| RoHS ылайыктуу | Ооба |
Кепилдик маалымат
The WD Black 4TB Desktop Hard Drive (Model: WD4003FZEX) comes with an industry-leading 5 жылдык өндүрүүчү чектелген кепилдик. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and the process for making a warranty claim, please refer to the official Western Digital warranty policy available on their webсайт.
Эскертүү: The warranty typically does not cover data loss. It is crucial to maintain regular backups of your data.
Колдоо жана ресурстар
For further assistance, technical support, or to access additional resources, please visit the official Western Digital support website. You can find drivers, firmware updates, diagnostic tools, and frequently asked questions (FAQs) there.
- Официалдуу Webсайт: Western Digital Support
- Продукт Барагы: Издөө "WD4003FZEX" on the Western Digital webпродукт жөнүндө маалымат алуу үчүн сайт.
- Колдонуучунун колдонмосу (PDF): A comprehensive user manual in PDF format may be available for download from the product's support page.