Inventum MK350 Milk Frother

Introduction

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Маанилүү коопсуздук нускамалары

• Колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
• Do not immerse the frother unit or power base in water or other liquids.
• VoltagШайманда көрсөтүлгөн e жергиликтүү электр тармагына туура келетtagэ туташтыруудан мурун.
• Бул шайман тиричиликте гана колдонуу үчүн. Сыртта колдонбоңуз.
• Шайманды ар дайым туруктуу, түз, ысыкка чыдамдуу бетке койуңуз.
• Шайманды шнур же сайгычы бузулуп, же шайман иштебей калгандан кийин же кандайдыр бир зыянга учураганда иштетпеңиз.
• Шайманды жана анын шнурун балдар жетпеген жерде сактаңыз.
• ысык беттерге тийбеңиз. Туткаларды же туткаларды колдонуңуз.
• Колдонбогондо жана тазалоодон мурун розеткадан ажыратыңыз. Тетиктерди кийүүдөн же чечүүдөн мурун жана шайманды тазалоодон мурун муздатып алыңыз.
• Өндүрүүчү сунуш кылбаган тиркемелерди колдонбоңуз.

Продукт бүттүview

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

1-сүрөт: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

2-сүрөт: А тарап view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

3-сүрөт: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

4-сүрөт: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

5-сүрөт: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

Компоненттери:

• Frother Jug: Stainless steel jug with non-stick interior.
• туткасы: Ergonomic handle for safe pouring.
• Капкак: Transparent lid (not explicitly shown but implied for frother).
• Көбүктүү венчик: Detachable whisk with spring coil for frothing.
• Жылытуу үчүн бычак: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• Башкаруу панели: Power button and indicator lights for different functions.
• Күч базасы: Cordless 360-degree rotating base with power cord.

Жайгашуу

1. Пакеттен чыгаруу: Carefully remove all packaging materials. Retain packaging for future storage or transport.
2. Алгачкы тазалоо: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp кездеме.
3. Жайгашкан жери: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. Чыпкалоочу тиркеме: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

Иштөө нускамалары

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Prepare the Frother: Ensure the frothing whisk is correctly installed inside the jug.
2. Сүт кошуу: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • үчүн көбүктүү (hot or cold): Do not exceed the 115 мл белгилөө.
   • үчүн жылытуу гана (without frothing): Do not exceed the 240 мл белгилөө.

   Note: Using full-fat milk typically yields the best frothing results.
3. Электр базасына жайгаштыруу: Position the frother jug onto the power base.
4. Функцияны тандоо:
   • үчүн hot frothing or сүт жылытуу: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • үчүн муздак көбүк: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. Операция: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. Кызмат кылуу: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. Муздатуу: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

Тейлөө жана тазалоо

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. Ажыратып, муздатуу: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. Чачты алып салуу: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: The frother jug is Колду гана жуу. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Clean Whisk: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. Таза сырткы: Wipe the exterior of the frother jug and the power base with a damp кездеме. Электр базасын сууга батырбаңыз.
6. Сактагыч: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

Проблемаларды чечүү

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Кубат базасы иштеп жаткан электр розеткасына бекем сайылганын текшериңиз.
  • Verify the frother jug is correctly placed on the power base.
  • Кубат баскычын бекем басыңыз.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

Техникалык шарттар

Кепилдик жана колдоо

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official webбайланыш маалыматы үчүн сайт.