1. Киришүү
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dodge Genuine 82212299AC Tubular Side Steps. Please read this manual thoroughly before beginning installation to ensure proper fitment and safe use. Retain this manual for future reference.
2. Продукт бүтүп калдыview
The Dodge Genuine 82212299AC Tubular Side Steps are designed to provide a convenient and secure stepping surface for vehicle entry and exit. These steps are constructed from lightweight anodized aluminum or powder-coated steel, featuring a mandrel-bent design for consistent diameter and molded end caps for an integrated appearance.
1-сүрөт: Бүттүview of the Dodge Genuine Tubular Side Steps. These steps feature a black finish and integrated stepping pads.
2-сүрөт: Detail of the stepping pad on the Dodge Tubular Side Step, highlighting the textured surface and the embossed 'DODGE' branding.
3. Шайкештик
These tubular side steps are specifically designed for the following vehicle models:
- 2011-2013 Dodge Durango
Ensure your vehicle matches the specified model years before proceeding with installation.
4. Коопсуздук маалыматы
Always prioritize safety during installation and use. Failure to follow these safety guidelines may result in injury or damage to your vehicle.
- Коргоочу көз айнек жана кол кап сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
- Унаа тегиз жерде токтоп турганына, токтоочу тормозду иштетиңиз.
- Do not exceed the maximum weight capacity of the side steps (consult vehicle manufacturer specifications if available).
- Periodically inspect the side steps and mounting hardware for looseness or damage.
- If you are unsure about any step of the installation process, seek professional assistance.
5. Орнотуу жана орнотуу
Installation typically involves mounting the side steps to existing frame points on your vehicle. Specific instructions may vary slightly based on vehicle configuration. Refer to your vehicle's service manual for detailed frame diagrams if necessary.
5.1. Керектүү куралдар (камтылган эмес)
- Розетка ачкычтарынын топтому
- Момент ачкычы
- Өлчөө лентасы
- Коопсуздук көз айнек
- Колкаптар
5.2. Орнотуу кадамдары
- Унаа даярдоо: Park the vehicle on a flat, stable surface. Engage the parking brake and turn off the engine.
- Монтаждоо пункттарын аныктоо: Locate the factory mounting points along the rocker panel or frame of your Dodge Durango. These are typically pre-drilled holes or existing bolt locations.
- Кашаларды тиркөө: Secure the mounting brackets (if separate from the steps) to the vehicle's frame using the provided hardware. Hand-tighten bolts initially.
- Position Side Step: Carefully lift and position the tubular side step onto the attached brackets. Ensure proper alignment.
- Secure Side Step: Attach the side step to the brackets using the remaining hardware. Hand-tighten all bolts.
- Adjust and Torque: Adjust the side step for optimal positioning and levelness. Once satisfied, progressively tighten all mounting bolts to the vehicle manufacturer's recommended torque specifications. Ашыкча катуулабагыла.
- Башка тарап үчүн кайталаңыз: Follow the same procedure for installing the side step on the opposite side of the vehicle.
- Акыркы текшерүү: Double-check all bolts for tightness and ensure the side steps are securely mounted and stable.
6. Иштөө (колдонуу)
The tubular side steps are designed for easy and safe vehicle entry and exit. Step onto the textured pads for secure footing. Ensure your footwear is clean and dry to prevent slipping.
- Always step onto the designated textured areas.
- Avoid placing excessive weight on the steps, especially when entering or exiting.
- Do not use the side steps as a jacking point or for vehicle recovery.
7. Техникалык тейлөө
Regular maintenance will help preserve the appearance and functionality of your side steps.
- Тазалоо: Wash the side steps regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Текшерүү: Periodically inspect all mounting hardware for tightness. Re-torque bolts if necessary. Check for any signs of corrosion, cracks, or damage to the steps or mounting brackets.
- Кышкы кам көрүү: In areas with road salt or de-icing chemicals, rinse the steps frequently to prevent corrosion.
8. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Side step feels loose | Орнотуучу болттор бошоп калган. | Inspect and re-torque all mounting bolts to specifications. |
| Unusual noise from step | Loose hardware or contact with vehicle body. | Check all mounting points. Ensure no part of the step is rubbing against the vehicle. |
| Difficulty aligning step | Incorrect bracket placement or vehicle not level. | Verify bracket orientation and mounting points. Ensure vehicle is on a level surface. |
9. Техникалык шарттар
- Модел: 82212299AC
- Бренд: Dodge Genuine
- Материал: Эритме болот, алюминий
- Тышкы жасалгалоо: Black (Powder-coated steel or anodized aluminum)
- Элемент Салмагы: Болжол менен 45.8 фунт (жалпы пакет)
- Пакеттин өлчөмдөрү: 76 x 11.5 x 11.5 дюйм
- Шайкештик: 2011-2013 Dodge Durango
10. Кепилдик жана колдоо
For warranty information regarding your Dodge Genuine 82212299AC Tubular Side Steps, please refer to the documentation provided at the time of purchase or contact your authorized Dodge dealer. Support for genuine Dodge accessories is typically handled through official Dodge service channels.
For further assistance, please visit the official Dodge webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
