Продукт бүттүview
The Hunter ICD600 is a 6-station decoder designed for use with Hunter's ACC controller, integrating advanced features with the benefits of a two-wire decoder system.
Негизги өзгөчөлүктөрү:
- Decoder station sizes available: 1, 2, 4, 6.
- Max distance to decoder, 14 AWG wire path: 10,000 ft.
- Max distance to decoder, 12 AWG wire path: 15,000 ft.
- Max recommended distance, decoder to solenoid: 150 ft.
- Field programmable decoders for flexible configuration.
- ICD-HP wireless handheld programmer compatible for easy setup.
- Two-way communications for reliable operation.
- Internal surge suppression with included ground wire for protection.
- Dual pump/master valve outputs assignable to decoders.
- Wire path connectors included with each decoder.
- Supports up to 6 wire paths.
- Compatible with optional Hunter Solar Sync sensor for automatic daily weather-based scheduling.
Image: The Hunter ICD600 6-Station Decoder, a black rectangular unit with various colored wires (red, blue, black, white, yellow, green) emerging from its top, indicating its electrical connections.
Орнотуу жана орнотуу
Proper installation is crucial for the optimal performance and longevity of your ICD600 decoder. Always ensure power is disconnected before beginning any wiring.
Wiring the Decoder:
- Identify Wire Paths: The ICD600 supports up to 6 wire paths. Plan your irrigation zones and corresponding wire runs from the ACC controller.
- Connect Two-Wire Path: Connect the two-wire path from the ACC controller to the designated terminals on the ICD600 decoder. Ensure a secure, waterproof connection using the provided wire path connectors.
- Connect Solenoid Wires: Connect the solenoid wires from each irrigation valve to the corresponding station terminals on the decoder. Observe polarity if specified by the valve manufacturer, though decoders typically manage this internally.
- Жер зымынын туташуусу: Connect the included ground wire from the decoder to a suitable earth ground point to utilize the internal surge suppression. This is vital for protecting the unit from electrical surges.
- Master Valve/Pump Start: If using a master valve or pump, connect its wires to the designated master valve/pump output terminals on the decoder. These outputs can be assigned to specific decoders via the controller programming.
- Sensor Decoder (Optional): If using a sensor decoder with Flow and Click inputs, connect these as per the sensor's instructions to the appropriate terminals.
Programming the Decoder:
The ICD600 decoders are field programmable. This can typically be done using the ACC controller's interface or with the optional ICD-HP wireless handheld programmer.
- Refer to your ACC controller's manual for detailed instructions on assigning station numbers to the connected decoders.
- Utilize the ICD-HP programmer for convenient programming and diagnostics in the field without needing to access the main controller.
Иштөө нускамалары
Once installed and programmed, the ICD600 decoder operates seamlessly with your Hunter ACC controller. All irrigation scheduling and manual operations are managed through the main controller.
Кадимки операция:
- The ACC controller sends signals through the two-wire path to the ICD600 decoder.
- The decoder receives these signals and activates the corresponding irrigation station (valve) as programmed.
- Two-way communication allows the controller to receive feedback from the decoder, aiding in diagnostics and system monitoring.
Өркүндөтүлгөн өзгөчөлүктөр:
- Күн синхрондоштуруусу шайкештиги: If an optional Hunter Solar Sync sensor is connected to your ACC controller, the system will automatically adjust irrigation schedules daily based on local weather conditions, optimizing water usage.
- Dual Pump/Master Valve Control: The decoder can manage dual pump or master valve outputs, allowing for flexible system design and control.
For detailed instructions on programming irrigation schedules, manual station operation, and advanced controller settings, please refer to the Hunter ACC Controller User Manual.
Техникалык тейлөө
The Hunter ICD600 decoder is designed for durability and requires minimal maintenance. However, periodic checks can help ensure long-term reliable operation.
- Байланыштарды текшерүү: Annually inspect all wire connections, especially those exposed to the elements, to ensure they remain secure and waterproof. Damaged insulation or corroded connectors can lead to system malfunctions.
- Жерге туташууну текшерүү: Verify that the ground wire connection for surge suppression remains intact and properly grounded.
- Курчап турган чөйрөнү коргоо: Ensure the decoder is installed in a location protected from direct physical damage and extreme environmental conditions where possible, although it is designed for outdoor use.
- Программалык камсыздоо жаңыртуулары: Keep your ACC controller's firmware updated as recommended by Hunter to ensure compatibility and optimal performance with connected decoders.
Проблемаларды чечүү
If you encounter issues with your ICD600 decoder or irrigation system, consider the following common troubleshooting steps:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Station not activating |
|
|
| System reports communication error |
|
|
| Surge suppression issues |
|
|
For more complex issues or if the above steps do not resolve the problem, contact Hunter technical support or a certified irrigation professional.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | ICD600 |
| Продукциянын өлчөмдөрү | 5 x 7 x 10 дюйм |
| Элемент Салмагы | 1.15 фунт |
| Decoder Station Sizes Available | 1, 2, 4, 6 |
| Max Distance to Decoder (14 AWG wire) | 10,000 фут. |
| Max Distance to Decoder (12 AWG wire) | 15,000 фут. |
| Max Recommended Distance (Decoder to Solenoid) | 150 фут. |
| Толкундун басылышы | Internal (ground wire included) |
| Number of Wire Paths | 6 |
| Өндүрүүчү | Стандарттык сантехникалык камсыздоо - LG |
Кепилдик маалымат
Hunter Industries products are manufactured to the highest quality standards and are backed by a limited warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with the product packaging or can be found on the official Hunter Industries webсайт.
Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
Кардарларды колдоо
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Hunter Industries customer support.
- Онлайн ресурстар: Visit the official Hunter Industries website for FAQs, product documentation, and support forums.
- Байланыш маалыматы: Refer to the Hunter Industries website or your product packaging for the most current contact details, including phone numbers and email addresses for technical support.
- Кесиптик жардам: Consider consulting a certified irrigation professional for installation or complex system diagnostics.
