Introduction
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter Sprinkler XC600 X-Core 6-Station Outdoor Irrigation Controller. The X-Core is an entry-level residential controller designed for reliable performance. It can be enhanced with a Solar Sync ET sensor (sold separately) to transform it into a smart controller, optimizing irrigation runtimes based on local weather conditions for efficient water conservation.
Продукт бүттүview жана өзгөчөлүктөрү
Сүрөт 1: Алдыңкы view of the Hunter XC600 X-Core Controller with its protective door open, displaying the control panel and included keys.
The Hunter XC600 X-Core controller offers a range of features designed for ease of use and efficient irrigation management:
- 6-Station Control: Manages up to six independent irrigation zones.
- Бир нече программалар: Supports 3 independent programs (A, B, C) with 4 start times each, allowing for flexible scheduling.
- Automatic Short Circuit Protection: Protects the controller from electrical damage due to wiring faults.
- Easy Retrieve Memory: Stores all programming in non-volatile memory, ensuring settings are retained even during power outages.
- Hunter Quick Check: A diagnostic feature that helps identify and troubleshoot field wiring issues quickly.
- ROAM Remote Control Compatibility: Can be operated remotely with Hunter's ROAM Remote Control (sold separately).
- Solar Sync ET Sensor Compatibility: Integrates with the Solar Sync ET sensor for automatic seasonal adjustment and water conservation.
Орнотуу жана орнотуу
Контроллерди орнотуу
Figure 2: The Hunter XC600 X-Core Controller securely mounted on an outdoor brick wall, ready for wiring connections.
- Choose a suitable outdoor location, protected from direct sunlight and extreme weather conditions if possible, though the unit is designed for outdoor use.
- Use the provided mounting template or mark the two mounting holes on the wall. Ensure the controller is level.
- Drill pilot holes and insert appropriate wall anchors (if necessary).
- Берилген бурамалар менен контроллерди дубалга бекитиңиз.
Зымдарды туташтыруу
Figure 3: Internal wiring compartment of the Hunter XC600 X-Core controller, showing the terminal block for station, common, and sensor wire connections.
- Кубат туташуу: The controller operates on 120 Volts AC. Connect the power cord to a grounded outdoor outlet. For direct wiring, consult a qualified electrician.
- Клапан зымдары: Ар бир электромагниттик клапандан бирден зымды контроллердогу номерленген терминалга (1-6) туташтырыңыз.
- Жалпы зым: Connect the common wire from all solenoid valves to the terminal marked "COM". This is crucial for valve operation.
- Мастер клапан/насосту баштоо релеси (кошумча): If using a master valve or pump start relay, connect its common wire to the "COM" terminal and its control wire to the terminal marked "MV".
- Сенсордук зымдар (милдеттүү эмес): For rain sensors or Solar Sync ET sensors, connect the sensor wires to the designated "SEN" terminals. Refer to your sensor's manual for specific wiring instructions. Ensure the sensor bypass switch is in the "ACTIVE" position if a sensor is connected.
Иштөө нускамалары
The X-Core controller features a user-friendly dial and button interface for easy programming and operation.
Дата менен убакытты орнотуу
- терүү үчүн бургула Дата/Убакыт позиция.
- колдонуу + or - buttons to adjust the year, month, day, hour, and minute. Press the > баскычын басып, кийинки параметрге өтүңүз.
Баштоо убакыттарын коюу
- терүү үчүн бургула Times Times позиция.
- колдонуу + or - buttons to set the desired start time for Program A (P-A).
- басыңыз > button to move to the next start time or program. You can set up to 4 start times per program.
Setting Run Times
- терүү үчүн бургула Run Times позиция.
- The display will show the program (e.g., P-A) and station number (e.g., S-1). Use the + or - buttons to set the run time for the current station.
- басыңыз > button to move to the next station. Repeat for all stations in the program.
- To switch programs (A, B, C), press the ПРОГ баскычы.
Суу күндөрүн белгилөө
- терүү үчүн бургула Суу күндөрү позиция.
- колдонуу + or - buttons to select specific days of the week for watering. A blinking water drop icon indicates the selected day. Press > кийинки күнгө жылдыруу.
- Alternatively, you can choose odd/even day watering or interval watering.
Кол менен иштетүү
- Manual Single Station: Тергичти буруңуз Manual. колдонуу > button to select the station you wish to run. Use + or - to set the run time. The station will begin watering immediately.
- Manual All Programs: Тергичти буруңуз Manual. басыңыз ПРОГ button to select "ALL". All programmed stations will run sequentially.
Тутум өчүк
To stop all automatic watering, turn the dial to the Тутум өчүк position. The display will show "OFF".
Seasonal Adjust (with Solar Sync)
Video 1: Official Hunter X-Core Irrigation Controller Product Guide. This video provides a detailed overview of the controller's features and programming, including water-saving capabilities like seasonal adjustment with Solar Sync.
If a Solar Sync ET sensor is connected, the controller will automatically adjust run times based on local weather. You can manually override this by turning the dial to Сезондук тууралоо and setting a percentage. This feature helps optimize water usage throughout the year.
Техникалык тейлөө
- Тазалоо: Periodically wipe down the controller's exterior with a damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Зымдарды текшерүү: Annually inspect all wiring connections for corrosion or damage. Ensure all terminals are secure.
- Сенсор текшерүү: If using a rain or ET sensor, ensure it is clean and free from obstructions. Test its functionality periodically according to the sensor's manual.
- Кыштоо: In regions subject to freezing temperatures, disconnect the power and drain all water from the irrigation system to prevent freeze damage to pipes and valves. The controller itself is designed for outdoor use but protecting it from direct ice buildup is recommended.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Контроллердин дисплейи бош. | No power to the controller; tripped circuit breaker; faulty transformer. | Check power outlet, circuit breaker. Ensure transformer is securely connected. |
| A specific zone does not water. | Faulty solenoid; broken wire; clogged nozzle; system off or rain sensor active. | Check solenoid for clicks; inspect wiring for breaks (use Hunter Quick Check); clean or replace nozzles; ensure system is not off and sensor bypass is correct. |
| All zones do not water. | Master valve not opening; common wire disconnected; system off; rain sensor active. | Check master valve operation; verify common wire connection; ensure dial is not in "System Off" position; check rain sensor status. |
| "ERR" message on display. | Wiring short circuit detected (Automatic Short Circuit Protection). | Identify and repair the short circuit in the field wiring. The Hunter Quick Check feature can assist. |
Техникалык шарттар
- Модель номери: XC600
- Продукциянын өлчөмдөрү: 5 x 7 x 10 дюйм
- Элемент Салмагы: 1.2 фунт
- Тtage: 120 вольт (AC)
- Материал: Пластик
- Түсү: Боз
- Өндүрүүчү: Hunter Industries
- Келип чыккан өлкө: АКШ
Кепилдик жана колдоо
For detailed warranty information, please refer to the warranty card included with your product or visit the official Hunter Industries website. Hunter Industries provides support for their products through their website and authorized dealers.
Көбүрөөк маалымат жана колдоо булактарын таба аласыз Amazon'догу Hunter дүкөнү or the official Hunter Industries webсайт.
